The fluororubber/silicone rubber blends were prepared by using fluororubber grafted by γ-methacryloxypropyltrimethoxysliane as a compatibilizer. Fourier transform infrared Spectra revealed that γ-methacryloxypropyltrimethoxysliane has been grafted onto fluororubber backbone. The effect of the compatibilizer content on curing characteristics, stress—strain behavior, mechanical properties, heat aging properties, and oil resistance was investigated. The results showed that the mechanical properties and oil resistance of the blends were improved with increasing of the compatibilizer up to 11.8 wt%. The compatibility of fluororubber and silicone rubber phase was characterized by dynamic mechanical analysis.
Hofmann, W. ( 1988). Properties and Applications of Selected Types of Elastomers , Kunststoffe - German Plastics, 78: 14-20.
2.
Kalfayan, S.H. , Silver, R.H. and Liu, S.S. (1976). Accelerated Heat-Aging Studies on Fluororubber in Various Media, RubberChem. Technol. , 49: 1001-1009.
3.
Habeeb, R.K. , Unnikrishnan, G. and Sujith, A. (2005). Cure Characteristics and Mechanical Properties of Styrene-Butadiene Rubber/Acrylonitrile Butadiene Rubber, Mater. Lett., 59: 633-639.
4.
Zaharescu, T. , Meltzer, V., Pincu, E. and Jipa, S. (2007). Thermal Study on Binary Blends of Ethylene-Propylene Elastomers and Acrylonitrile-Butadiene Rubber, Polym. Bullet., 58: 683-689.
5.
Zaharescu, T. , Meltzer, V. and Vilcu, R. (2000). Thermal Properties of EPDM/ NR Blends, Polym. Degrade. Stab., 70: 341-345.
6.
Pierce, O.R. and Kim, Y.K. (1973). High-temperature Fluorosilicone Elastomers, Appl. Polym. Symp., 22: 103-125.
7.
Ghosh, A., Kumar, B., Bhattacharya, A.K. and De, S.K. ( 2003). Effects of Blend Ratio and Vulcanizate Powders on the Processability of Silicone Rubber/Fluororubber Blends, J. Appl. Polym. Sci., 88: 2377-2387.
8.
Ghosh, A., Naskar, A.K., Khastgir, D. and De, S.K. ( 2001). Dielectric Properties of Blends of Silicone Rubber and Tetraflouroethylene/Propylene/ Vinylidene Fluoride Terpolymer, Polymer, 42: 9849-9853.
9.
Ghosh, A., Rajeev, R.S., De, S.K., Sharp, W. and Bandyopadhyaya, S. ( 2006). Atomic Force Microscopic Studies on the Silicone Rubber-fluororubber Blend Containing Ground Rubber Vulcanizate Powder, J. Elastom. Plast., 38: 119-132.
10.
Ghosh, A. and De, S.K. ( 2004). Dependence of Physical Properties and Processing Behavior of Blends, RubberChem. Technol., 77: 856-872.
11.
Fayt, R., Jerome, R. and Teyssie, P. ( 1982). Molecular Design of Multicomponent Polymer Systems -3. Comparative Behavior of Pure and Tapered Block Copolymers in Emulsification of Blends of Low-density Polyethylene and Polystyrene, J. Polym. Sci., Polym. Phys. Edn, 20: 2209-2217.
12.
Fayt, R., Hadjiandreou, P. and Teyssie, P. ( 1985). Molecular Design of Multicomponent Polymer Systems: VII. Emulsifying Effect of Poly (Ethylene-b-Styrene) Copolymer in High-density Polyethylene/Polystyrene Blends, J. Polym. Sci., Polym. Chem. Edn, 23: 337-342.
13.
Barentse, W.M. and Heikens, D. (1973). Mechanical Properties of Polystyrene Low Density Polyethylene Blends, Polymer, 14: 579-583.
14.
Joseph, A. and George, K.E. ( 1991). Studies on Polystyrene/Linear Low Density Polyethylene Blends, Kautschuk und Gummi Kunststoffe, 44: 538-541.
15.
Pticek, A., Hrnjak, M.Z. and Jelencic, J. ( 2008). Effect of Compatibilizer on Morphology and Mechanical Properties of SAN/EPDM Blends, Int. Polym. Process., 23: 356-362.
16.
Nakason, C. , Jarnthong, M., Kaesaman, A. and Kiatkamjornwong , S. (2008). Thermoplastic Elastomers Based on Epoxidized Natural Rubber and High-density Polyethylene Blends: Effect of Blend Compatibilizers on the Mechanical and Morphological Properties, J. Appl. Polym. Sci., 109: 2694-2702.
17.
Pichaiyut, S., Nakason, C., Kaesaman, A. and Kiatkamjornwong , S.Influences of Blend Compatibilizers on Dynamic, Mechanical, and Morphological Properties of Dynamically Cured Maleated Natural Rubber and High-density Polyethylene Blends, Polym . Test., 27: 566-580.
18.
Shabbir, S. , Zulfiqar, S., Lieberwirth, I., Kausar, A. and Sarwar, M. (2008). Compatibilizing Effect of Functionalized Polystyrene Blends: a Study of Morphology, Thermal, and Mechanical Properties, Surf. Interface Anal., 40: 906-913.
19.
Komalan, C. , George, K.E., Jacob, S. and Thomas, S. (2008). Reactive Compatibilization of Nylon Copolymer/EPDM Blends: Experimental Aspects and Their Comparison with Theory, Polym. Adv. Technol., 19: 351-360.
20.
Fayt, R., Jerome, R. and Teyssie, P. ( 1986). Molecular Design of Multicomponent Polymer Systems. XII. Direct Observation of the Location of a Block Copolymer in Low-density Polyethylene-Polystyrene Blends, J. Polym. Sci., Polym Lett. Edn, 24: 25-28.
21.
Ramesan, M.T. and Alex, R. (2001). Compatibilization of SBR/NBR Blends Using Chemically Modified Styrene-Co-Butadiene Rubber. Part 2. Effect of Compatibilizer Loading, Polym. Int., 50: 1298-1308.
22.
Kader M.A., Kim, W.D., Kaang, S. and Nah, C. ( 2005). Morphology and Dynamic Mechanical Properties of Natural Rubber/Nitrile Rubber Blends Containing Trans-Polyoctylene Rubber as a Compatibilizer , Polym. Int., 54: 120-129.
23.
Kasemura, T., Kawamoto, K. and Kashima, Y. ( 1990). Studies on the Modification of Epoxy Resin with Silicone Rubber, J. Adhesion, 33: 19-31.
24.
Kole, S., Santra, R. and Bhowmick, A.K. ( 1994). Studies of In-Situ Compatibilized Blend of Silicone and EPDM Rubbers, RubberChem. Technol., 67: 119-128.
25.
Kole, S., Chaki, T.K., Bhowmick, A.K. and Tripathy, D.K. ( 1993). Effect of Compatibiliser, Curing Sequence and Ageing on the Thermal Stability of Silicone Rubber, EPDM Rubber and Their Blends, Polym. Degrad. Stab., 41: 109-116.
26.
Treloar, L.R.G. ( 1976). The Physics of Rubber Elasticity, 3rd edn, Oxford: Clarendon Press .
27.
Mark, J.E. ( 1975). Constants 2C//1 and 2C//2 in Phenomenological and Their Dependence on Experimental Theory and Their Dependence on Experimental Variables, RubberChem. Technol., 48: 495-508.
28.
Sombatsompop, N. and Christodoulou , K.J. (1997). Penetration of Aromatic Hydrocarbons into Natural Rubber, Polym. Polym. Compos., 5: 377-386.
