Morphology Development and Melt Linear Viscoelastic Properties of (PA6/PP/PS) Ternary Blend Systems

Abstract

The morphology development and melt linear viscoelastic properties of PA6/PP/PS (70/15/15) ternary blends were studied. An attempt was also made to predict the morphology development of these blends using the dynamic interfacial tension of the blend components evaluated from the Palierne's viscoelastic model in conjunction with spreading coefficient approach. The blend samples were prepared by melt blending in an internal mixer at temperature of 260°C and rotor speed of 60 rpm. The ternary blend samples exhibited a pronounced low-frequency nonterminal storage modulus whose values were much greater than those predicted for elastic response of the binary blend samples. This was attributed to strong elastic resistance of a core-shell composite droplet formed in the ternary blend samples that was evidenced by the SEM micrographs of these samples. The results predicted based on spreading coefficient concept also suggested a core-shell type morphology in which PP core was encapsulated by PS shell as a composite minor phase dispersed in PA6 matrix. It was demonstrated that there is a close relationship between melt viscoelastic properties and morphology of ternary blends.

Keywords

rheology interfacial tension core-shell morphology ternary blends.

Get full access to this article

View all access options for this article.

References

Horiuchi, S. , Matchariyakul, N. , Yase, K. , Kitano, T. , Choi, H.K. and Lee, Y.M. (1996). Compatibilizing Effect of a Maleic Anhydride Functionalized SEBS Triblock Elastomer Through a Reaction Induced Phase Formation in the Blends of Polyamide 6 and Polycarbonate: 1 . Morphology and Interfacial Situation, Polymer, 37: 3065-3078.

Nemirovsky, N. , Siegmann, A. and Narkis, N.J. (1995). Morphology of Ternary Immiscible Polymer Blends, Macromol. Sci. Phys., 34B: 459-475.

Harkin, W.D. (1952). The Physical Chemistry of Surface Film, New York, Reinhold.

Hobbs, S.Y. , Dekkers, M.E.J. and Watkins, V.H. (1988). Effect of Interfacial Forces on Polymer Blend Morphologies, Polymer, 29: 1598-1602.

Guo, H.F. , Gvozdic, N.V. and Meier, O.J. (1997). Prediction and Manipulation of the Phase Morphologies of Multiphase Polymer Blends: II. Quaternary Systems, Polymer, 38: 4915-4923.

Hemmati, M. , Nazokdast, H. and Shariat Panahi, H. (2001). Study on Morphology of Ternary Polymer Blends. II. Effect of Composition, J. Appl. Polym. Sci., 82: 1138-1146.

Hemmati, M. , Nazokdast, H. and Shariat Panahi, H. (2001). Study on Morphology of Ternary Polymer Blends. I. Effects of Melt Viscosity and Interfacial Interaction , J. Appl. Polym. Sci., 82: 1129-1137.

Reignier, J. , Favis, B.D. and Heuzey, M.C. (2003). Factors Influencing Encapsulation Behavior in Composite Droplet-type Polymer Blends, Polymer, 44: 49-59.

Van Oene, H.J. (1972). Modes of Dispersion of Viscoelastic Fluids in Flow, Colloid Interface Sci., 40: 448-467.

10.

Reignier, J. and Favis, B.D. (2003). On the Presence of a Critical Shell Volume Fraction Leading to Pseudo-pure Droplet Behavior in Composite Droplet Polymer Blends , Polymer, 44: 5061-5066.

11.

Wilkinson, A.N. , Clemens, M.L. and Harding, V.M. (2004). The Effects of SEBS-g-Maleic Anhydride Reaction on the Morphology and Properties of Polypropylene/PA6/SEBS Ternary Blends, Polymer, 45: 5239-5249.

12.

Reignier, J. and Favis, B.D. (2003). Core-shell Structure and Segregation Effects in Composite Droplet Polymer Blends, AIChe J., 49: 1014-1023.

13.

Valera, T.S. , Morita, A.T. and Demarquette, N.R. (2006). Study of Morphologies of PMMA/PP/PS Ternary Blends, Macromolecules, 39: 2663-2675.

14.

Omonov, T.S. , Harrat, C. and Groeninckx, G. (2005). Co-continuous and Encapsulated Three Phase Morphologies in Uncompatibilized and Reactively Compatibilized Polyamide6/Polypropylene/Polystyrene Ternary Blends Using Two Reactive Precursors, Polymer, 46: 12322-12336.

15.

Palierne, J.F. (1990). Linear Rheology of Viscoelastic Emulsions with Interfacial Tension, Rheol. Acta, 29: 204-214.

16.

Bousmina, M. and Muller, R.J. (1993). Linear Viscoelasticity in the Melt of Impact PMMA. Influence of Concentration and Aggregation of Dispersed Rubber Particles, Rheology, 37: 663-679.

17.

Choi, J.H. Ryu, J.H. and Kim, S.Y. (2000). A Linear Viscoelastic Model of Matrix/Core-shell Modifier Polymer Blends, J. Polym. Sci. Part B: Polym. Phys. , 38: 942-953.

18.

Bousmina, M. (1999). Rheology of Polymer Blends: Linear Model for Viscoelastic Emulsions, Rheol. Acta, 38: 73-83.

19.

Mostofi, N. , Nazockdast, H. and Mohammadigoushki , H. Study on Morphology and Viscoelastic Properties of PP/PET/SEBS Ternary Blend and their Fibers , J. Appl. Polym. Sci. (accepted for publication).

20.

Macaúbas, P.H.P. and Demarquette, N.R. (2001). Morphologies and Interfacial Tension of Compatibilized PP/PS Blends, Polymer, 42: 2543-2554.

21.

Asthana, H. and Jayaraman, K. (1999). Rheology of Reactively Compatibilized Polymer Blends with Varying Extent of Interfacial Reaction , Macromolecules, 32: 3412-3419.

22.

Chappelear, D.C. (1964). Interfacial Tension Between Molten Polymers, ACS Polym. Prepr., 5: 363-372.