Morphological and Mechanical Properties of Rubber-toughened Polyamide 6/Polypropylene Nanocomposites Prepared by Different Methods of Compounding

Abstract

The nanocomposites based on polyamide 6/polypropylene blends (PA6/PP), polypropylene grafted with maleic anhydride (PPgMAH), ethylene octene copolymer (POE), and organically modified montmorillonite (organoclay) are prepared through different mixing sequences of melt intercalation technique. The processes used are: (1) direct melt intercalation single extrusion process (SD), (2) two times direct melt intercalation (S2x), (3) two steps melt intercalation i.e., mixing of preblend PA6/organoclay with preblend PP/ PPgMAH/POE (S2sa), and (4) two steps melt intercalation i.e., mixing of preblend PA6/PP/PPgMAH/organoclay with POE (S2sb). The effect of various processing techniques on the structural, morphological, and mechanical properties of nanocomposites is characterized by X-ray diffraction (XRD), scanning electron microscope (SEM), tensile, flexural, and Izod impact testing. The results show that all the methods give generally exfoliated structures based on XRD. It is also found that the melt intercalation technique significantly influences the dispersion behavior of POE in the PA6/PP matrix and thus the impact properties. However, no significant blending sequence effect is found for tensile and flexural properties of nanocomposites. Overall, the method S2sa gives the best mechanical properties due to its good dispersion of organoclays and elastomer in the continuous PA6/PP matrix.

Keywords

nanocomposites melt intercalation organoclay PA6/PP blends blending sequence

Get full access to this article

View all access options for this article.

References

Chow, W.S. , Ishak, Z.A. , Kocsis, J.K. , Apostolov, A.A. and Ishiaku, U.S. (2003). Compatibilizing Effect of Maleated Polypropylene on the Mechanical Properties and Morphology of Injection Molded Polyamide 6/Polypropylene/ Organoclay Nanocomposites , Polymer, 44(24): 7427–7440 .

Chow, W.S. , Ishak, Z.A. , Kocsis, J.K. , Apostolov, A.A. and Ishiaku, U.S. (2003). The Effect of Organoclay on the Mechanical Properties and Morphology of Injection-Molded Polyamide 6/Polypropylene Nanocomposites , Journal of Applied Polymer Science, 91(1): 175–189 .

Wahit, M.U. , Hassan, A. , Ishak, Mohd, Z.A. , Rahmat, A.R. , Lim, J.W. and Othman, N. (2005). Morphological and Mechanical Properties of Rubbertoughened Nanocomposites , In: International Conference on Advances in Polymer Blends, Composites, IPNS and Gel: Macro to Nano Scales (ICBC-2005), 21st—23rd March, Kerala, India.

Wahit, M.U. , Hassan, A. , Ishak, Mohd, Z.A. and Abu Bakar, A. (2005). The Effect of Polyethylene-octene Elastomer on the Morphological and Mechanical Properties of Polyamide 6/Polypropylene Nanocomposites , Polymers and Polymer Composites, 13(8): 795–806 .

Dennis, H.R. , Hunter, D.L. , Chang, D. , Kim, S. , White, J.L. , Cho, J.W. and Paul, D.R. (2001). Effect of Melt Processing Conditions on the Extent of Exfoliation in Organoclay-based Nanocomposites , Polymer, 42(23): 9513–9522 .

Cho, J.W. and Paul, D.R. (2001). Glass Fiber-reinforced Polyamide Composites Toughened with ABS and EPR-g-MA , Journal of Applied Polymer Science, 80(4): 484–497 .

Basilai, B.A. , Murakami, Y. , Kanie, K. and Suzuki, S. (2004). In: 4th International Material Technology Conference & Exhibition, March 23—25, Hotel Istana, Kuala Lumpur, Malaysia: IMTCE.

Vaia, R.A. , Ishii, H. and Giannelis, E.P. (1993). Synthesis and Properties of Two-dimensional Nanostructures by Direct Intercalation of Polymer Melts in Layered Silicates , Chem. Materials, 5(12): 1694–1696 .

Wang, Y. , Chen, F.B. , Li, Y.-C. and Wu, K.-C. (2004). Melt Processing of PP/Clay Nanocomposites Modified with Maleated PP Compatibilizer , Composites Part B: Engineering, 35(2): 111–124 .

10.

Laura, D.M. , Keskulla, H. , Barlow, J.W. and Paul, D.R. (2001). Effect of Glass Fiber and Maleated Ethylene-propylene Rubber Content on Impact Fracture Parameters of Nylon 6 , Polymer, 42(14): 6161–6172 .

11.

Li, X. , Park, H.M. , Lee, J.O. and Ha, C.S. (2002). Effect of Blending Sequence on Microstructure and Properties of PBT/EVA-g-MAH/ Organoclay Ternary Nanocomposites , Polymer Engineering and Science, 42(11): 2156–2164 .

12.

Wu, J. , Xue, P. and Mai, Y.W. (2000). Effect of Blending Sequence on Morphology and Impact Toughness of Poly(ethylene terepthalate)/ Polycarbonate Blends , Poly. Eng. Sci., 40(3): 786–797 .

13.

Ohlsson, B. , Hassander, H. and Tornell, B. (1998). Effect of the Mixing Procedure on the Morphology and Properties of Compatibilized PP/PA Blends , Polymer, 39(20): 4715–4721 .

14.

Dasari, A. , Yu, Z.Z. and Mai, Y.-W. (2004). Effect of Blending Sequence on Microstructure of Ternary Nanocomposites , Polymer, 46(16): 5968–5991 .

15.

Arostegui, A. and Nazabal, J. (2003). New Super-tough Poly(Butylenes Terephthalate) Materials Based on Compatibilized Blends with Metallocenic Poly(ethylene-octene) , Polymer Advanced Technologies, 14(6): 400–408 .

16.

Bartezak, Z. , Argon, A.S. , Cohen, R.E. and Weinberg, M. (1999). Toughness Mechanism in Semi-crystalline Polymer Blends: I. High-Density Polyethylene Toughened with Rubbers , Polymer, 40(9): 2331–2346 .

17.

Zeng, N. , Bai, S.L. , Sell, C.G. , Hiver, J.-M. and Mai, Y.W. (2002). Study on the Microstrutures and Mechanical Behaviour of Compatibilized Polypropylene/Polyamide-6 Blends , Polymer International, 51(12): 1439–1447 .