Sage Journals: Discover world-class research

Abstract

Ethylene propylene diene monomer rubber (EPDM) is blended with nitrile rubber (NBR). The morphology of this blend is improved by the addition of modified EPDM in small amounts. The intrinsic viscosity, permittivity measurements, and scanning electron microscopy revealed improved compatibility of these rubbers. Mechanical properties after thermal aging of the blends containing modified EPDM show positive deviation from the additive rule. Of all EPDM-NBR blend ratios investigated, the 25/75 blend ratio compatibilized with aminated epoxidized EPDM, shows the best mechanical properties, heat resistance, and stability against UV irradiation.

Keywords

compatibility thermal stability EPDM NBR rubber blends modified EPDM

Get full access to this article

View all access options for this article.

References

Subramanian, V. and Ganapathy, S. (1998). J. Appl. Polym. Sci., 70(5): 985-994 .

Hassander, H. and Tornell, B. (1985). Polymer Testing, 5(1): 11-25 .

Hassander, H. (1985). Testing, 5(1): 27-36 .

Aminabhavi, T.M. , Manjeshwar, L.S. and Cassidy, P.E. (1986). J. Appl. Polym. Sci., 32(2): 3719-3723 .

Dunn, J.R. (1989). Elastomerics, 121(2): 28-32 .

Namboodiri, C.S.S. and Tripathy, D.K. (1992). Plastics Rubber and Composites Processing and Applications, 17(3): 171-178 .

Maity, S.K. and Chakraborty, K.K. (1993). Journal of Elastomers and Plastics, 25(4): 358-380 .

Chasey, K.L. (1992). Rubber Chemistry and Technology, 65(2): 385-395 .

Richard, H.L. U.S. Patent EP0149192, 1985-07-24, Appl. EP840115918 19841220, (C08L67/02).

10.

Morrar, F., Ban, L.L., Funk, W.G., Kresge, E., Wang, H.C., Datta, S. and Keller, R.C. U.S. Patent 5428099, 1995-6-27, Appl. 064609 19930519, (C08K003/04).

11.

Datta, S. , Kollor R.C. and Morarr, F.T. (1997). Polymeric-Materials-Science and Engineering - Proceedings of the ACS Division of Polymeric Materials Science and Engineering, ACS, Washington, DC, USA, Vol. 76, pp. 95-96 .

12.

Botros, S.H. and Moustafa, A.F. (2002). J. Elastomers and Plastics, 34(1): 15-32 .

13.

Botros, S.H. (2002). Polym.-Plast. Technol. Eng., 41(2): 341-359 .

14.

Botros, S.H. and Moustafa, A.F. (2003). J. Appl. Polym. Sci., 89(11): 3143-3153 .

15.

Botros, S.H., Kenawy, M.E., Younan, A.F. and El-kashef, I.M. (2000). Kautschuk und Gummi Kunststoffe, 53(12): 722-729.

Compatibility and Thermal Stability of EPDM-NBR Elastomer Blends

Abstract

Keywords

Get full access to this article

References