Fabric handling evaluation of woven shirting fabrics by the fabric touch tester

Abstract

A fabric touch tester is a novel instrument with fabric handling properties. Its principal advantage is that the device has integrated modules for compression, surface friction, and thermal and bending properties. This module integration simplifies the testing process, and provides an efficient measurement method, and a comprehensive physical index. This study focused on woven fabrics for dress shirts. The fabric samples comprised three groups with various yarn compositions – that is, cotton, polyester, and wool. Sample group 1 was composed of cotton, polyester, and blended yarns; sample group 2 mainly compared the effect of twist yarns on the fabric touch; and sample group 3 was composed of wool and blended yarns with polyester. The handling properties were assessed by compression work and the compression recovery rate for the compression attributes. The results revealed that fabric (T100p1) with high twist-level yarns had a higher value of compression work (242.56 gf*mm²), and the texture type may affect the compression characteristics more significantly than the blending ratio. The fabric touch tester can also distinguish small changes in the compression properties of samples (0.43–0.71), the maximum heat flux and surface roughness amplitude for the thermal and surface roughness properties. The results revealed that the maximum heat flux value of all the samples in this study was 1109 Wm⁻², the sample C100 using pure cotton yarn had the highest maximum heat flux value (1270 Wm⁻²). Moreover, the sample W100 with 100% wool fiber yarn had the highest surface roughness amplitude in the warp direction (81 μm) and surface roughness amplitude in the weft direction (67 μm). Finally, the bending average rigidity was used to assess the bending performance of the fabric samples. These fabric touch tester indicators were applied to analyze the fabric handling characteristics of woven shirting fabrics, and perform cross-analysis among samples.

Keywords

Fabric touch tester handling properties compression surface friction thermal properties bending properties

Get full access to this article

View all access options for this article.

References

Zhou

Robust superhydrophobic cotton fabrics based on nano-silica particles hybrid epoxy resin: self-cleaning, anti-fouling, anti-abrasion and oil–water separation. Text Res J 2023; In press. https://doi.org/10.1177/00405175231190651

Cong

Liang

, et al. Structural design of single functional jersey with moisture comfort based on yarn combination. Text Res J 2023; In press. https://doi.org/10.1177/00405175231184257

Chiu

Huang

, et al. Flexible hybrid electronics nanofiber electrodes with excellent stretchability and highly stable electrical conductivity for smart clothing. ACS Appl Mater Interfaces 2022; 14: 42441–42453.

Hes

, et al. Fabric touch tester: integrated evaluation of thermal–mechanical sensory properties of polymeric materials. Polym Test 2006; 25: 1081–1090.

Özkan

Binnaz

Thermophysiological comfort properties of different knitted fabrics used in cycling clothes. Text Res J 2015; 85: 62–70.

Ullah

HMK

Lejeune

Cayla

, et al. A review of noteworthy/major innovations in wearable clothing for thermal and moisture management from material to fabric structure. Text Res J 2022; 92: 3351–3386.

Huang

Review of heat and water vapor transfer through multilayer fabrics. Text Res J 2016; 86: 325–336.

Pakdel

Naebe

Sun

, et al. Advanced functional fibrous materials for enhanced thermoregulating performance. ACS Appl Mater Interfaces 2019; 11: 13039–13057.

Akgül

Kizilkaya Aydoğan

Sinanoğlu

Investigation of different denim fabrics with fabric touch tester and sensory evaluation. J Nat Fibers 2021; 19: 5551–5565.

10.

Huang

Chiu

, Facile fabrication of a stretchable and flexible nanofiber carbon film-sensing electrode by electrospinning and its application in smart clothing for ECG and EMG monitoring. ACS Appl Electron Mater 2021; 3: 676–686.

11.

Vasile

Malengier

De Raeve

, et al. Influence of selected production parameters on the hand of mattress knitted fabrics assessed by the fabric touch tester. Text Res J 2019; 89: 98–112.

12.

Wilgocka

Krucińska

Skrzetuska

, et al. Investigations of three‐layer systems intended for protective clothing for prematurely born babies. Adv Mater Technol 2023; 2300457. In press. https://doi.org/10.1002/admt.202300457

13.

Shim

Koo

, et al. Comparison of the silhouette of virtual clothes by fabric characteristics of nylon fabric for the utilization of virtual clothes. ACS Omega 2022; 7: 47156–47164.

14.

Rajalakshmi

Kubera Sampath Kumar

Vasanth Kumar

, et al. Effect of plasma sericin glutaraldehyde treatments on the low stress mechanical properties of micro denier polyester/cotton blended fabric. Sci Rep 2022; 12: 9441.

15.

Karasawa

Mizuhashi

Uemae

, et al. Comfort properties of fabrics knitted from a two-ply yarn derived from abacá and cotton. Text Res J 2022; 92: 4325–4341.

16.

Peng

Qian

Zhou

, et al. Influence of incorporated polydimethylsiloxane on properties of PA66 fiber and its fabric performance. Polymers 2019; 11: 1735.

17.

Jaouachi

Khedher

Effect of compressional behaviour and sewing machine foot pressure on sewing thread consumption. Indian J Fibre Text Res 2022; 46: 325–332.

18.

Beyene

Muhammed

Linear model equation for prediction and evaluation of surface roughness of plain-woven fabric. Text Appar 2023; 33: 88–94.

19.

Breen

House

Wozny

MJ.

A particle based model for simulating the draping behaviour of woven cloth. Text Res J 1994; 64: 633–685.

20.

Yavuzkasap Ayakta

Oner

Celikkiran

A research on the mechanical properties of worsted fabrics made of high tenacity polyamide. Fibers Polym 2019; 20: 2426–2432.

21.

Liu

Novel method for measurement of fabric multi-directional bending performance. Fibers Polym 2022; 23: 3638–3644.

22.

Saricam

The comfort properties of hemp and flax blended denim fabrics with common industrial washing treatments. Text Res J 2022; 92: 3164–3178.

23.

Meena

Shakyawar

Varshney

RK.

Low-stress mechanical properties of wool-cotton blended fabrics. J Nat Fibers 2022; 19: 63–77.

24.

Tian

Sun

, et al. Tactile evaluation of down jacket fabric by the comprehensive handle evaluation system for fabrics and yarns. Text Res J 2021; 91: 1227–1238.

25.

Süle

Investigation of bending and drape properties of woven fabrics and the effects of fabric constructional parameters and warp tension on these properties. Text Res J 2012; 82: 810–819.

26.

Pan

Haig Zeronian

Ryu

HS.

An alternative approach to the objective measurement of fabrics. Text Res J 1993; 63: 33–43.

27.

Kan

Lau

TC.

Use of softener in home laundering of cotton fabric-hand feel value measurement by PhabrOmeter. Fibers Polym 2018; 19: 2203–2207.

28.

Tan

Shao

Lam

NYK

, et al. Intelligent textiles: designing a gesture-controlled illuminated textile based on computer vision. Text Res J 2022; 92: 3034–3048.

29.

Sun

Peng

A strain gradient strategy to quantifying longitudinal compression behavior in slender fibrous assembly structures. Text Res J 2022; 92: 346–355.

30.

Shanbeh

Johari

Zarrebini

, et al. Effect of a weft yarn spinning system on the shear characteristics of plain woven fabrics. Text Res J 2020; 90: 10–23.

31.

Pan

Yen

Zhao

, et al. A new approach to the objective evaluation of fabric handle from mechanical properties: part II: objective measures for primary handle. Text Res J 1988; 58: 531–537.

32.

Alberghini

Hong

Lozano

, et al. Sustainable polyethylene fabrics with engineered moisture transport for passive cooling. Nat Sustain 2021; 4: 715–724.

33.

Vasile

Georgievska

Copot

, et al. Comparative analysis of elastic polyester sportswear fabrics with printed graphene patterns. Materials 2023; 16: 2028.

34.

Liao

, et al. A simultaneous measurement method to characterize touch properties of textile materials. Fibers Polym 2014; 15: 1548–1559.