Ring spinning is the dominant system of manufacturing high-quality yarns in the textile industry. Spinning parameters affect the spinning tension distribution and consequently the temperatures of the ring/traveler system. Excessive traveler heat will limit the spindle speed and the efficiency of yarn production. This study modeled the effect of the traveler weight, yarn count, twist level and spindle speed on the temperatures of the traveler and ring during ring spinning. The finite element method was used to model the temperatures of the ring and the traveler for different spinning parameters. The experimental ring temperature and maximum traveler temperature from the validated model were recorded based on the experimental design. The results show that spindle speed, traveler weight and yarn count had a statistically significant effect on the temperatures of the traveler and the ring, with the spindle speed having the strongest effect. The twist level of yarn, within the range examined, had no statistically significant influence on the traveler and ring temperatures. For a given spindle speed, the traveler weight and yarn count have a significant effect on the maximum temperature of the traveler, and the temperature change is more pronounced at a higher spindle speed.
PanGCaiR.Thermal stress coupling analysis of ventilated disc brake based on moving heat source. Adv Mater Sci Eng2018;
2018: 1–11.
5.
BeranJKonečnaM.Approach to analyse of reaction forces in ring–traveller system. Autex Res J2017;
17: 268−276.
6.
JohnsonK.Contact mechanics, 1st ed.
London:
Cambridge University Press, 1985.
7.
StasiakMMichalakM.Tribology of three-element: traveller-ring-yarn friction arrangements in ring spinning. Reaction of ring to traveller in two-contact configuration. Part I. Fibres Text East Eur1996;
4: 28−33.
8.
StasiakMMichalakM.Tribology of three-element: traveller-ring-yarn friction arrangements in ring spinning. Reaction of ring to traveller in two-contact configuration. Part II. Fibres Text East Eur1996;
3: 59−61.
9.
StasiakMMichalakM.Tribology of three-element traveller-ring-yarn friction arrangement (TRY) in ring-spinning frames. Ring-traveller interaction under conditions of three-point contact. Part III. Fibres Text East Eur1997;
5: 42–45.
10.
LisiniGGToniPQuilghiniD, et al.
A comparison of stationary and non-stationary mathematical models for the ring-spinning process. J Text Inst1992;
83: 550–559.
11.
SuXLiuXLiS.Research on mutual relationships of flange ring and traveler on ring spinning system. Int J Clothing Sci Technol2019;
31: 32−57.
12.
CrankJWhitmoreDD.The influence of friction and traveller weight in ring spinning. Text Res J1954;
24: 1006–1010.
13.
BarrAED.The physics of yarn tensions and balloon shapes in spinning, winding and similar processes. J Text Inst Trans1960;
51: T17–T38.
14.
BracewellGMGreenhalghK.Dynamical analysis of the spinning balloon. J Text Inst Trans1953;
44: 266–292.
15.
SkenderiZOreškovićVPerićP, et al.
Determining yarn tension in ring spinningText Res J2001;
71: 343–350.
16.
FujinoKShimotsumaY.Studies on spinning rings and travellers. Text Res J1955;
25: 799–811.
17.
WuXHurrenCLiW, et al.
Numerical analysis of heat transfer in ring spinning. Text Res J2022;
92: 3990–4007.
18.
RengaSamyRS.Fundamental principles of ring spinning of yarns. In: LawrenceCA (ed) Advances in yarn spinning technology.
Cambridge:
Woodhead Publishing, 2010, pp. 42–77.
19.
ZhangSHanZHaoQ, et al.
Fatigue life calculation of high-power disc brake under thermal-mechanical coupling. IOP Conf Ser Mater Sci Eng2019;
692: 1−6.
20.
ShpenevAG.The influence of the thermoelastic instability on the wear of composite brake discs. J Frict Wear2021;
42: 30–37.
21.
ChoudhuriPK.Studies on thermal behaviour of cotton and eri/cotton blended fabrics using response surface methodology. J Inst Eng India Ser E2018;
99: 87–92.
22.
ChenJWZhaoBChenWJ, et al.
Response surface analysis of biaxial mechanical properties and elastic parameters for woven fabric composites. J Ind Text2019;
49: 219–242.
23.
CrankJ.A theoretical investigation of cap and ring spinning systems. Text Res J1953;
23: 266–276.
24.
ChenR.Yarn mechanics, 1st ed.
Beijing:
Textile Industry Press, 1989.
25.
RaymondHMMontgomeryDCAnderson-CookCM.Response surface methodology: process and product optimization using designed experiments, 4th ed.
New York:
Wiley, 2016.
26.
FerreiraSLCBrunsREFerreiraHS, et al.
Box–Behnken design: an alternative for the optimization of analytical methods. Analytica Chimica Acta2007;
597: 179–186.
27.
WangQ.Steady-state analysis of yarn balloon morphology and spinning tension. J Text1983;
4: 87–93.
28.
StasiakM.The problem of empirical adequacy of a model of the friction trio TRY (traveller-ring-yarn) under conditions of spindle eccentricity on a ring wool-spinning frame. Fibres Text East Eur1998;
6: 28–31.
GuptaSKGoswamiKKMajumdarA.Modeling of abrasion resistance of Persian handmade wool carpets using response surface methodology. Fibers Polym (Basel)2016;
17: 637–643.
31.
PurushothamaB.A Practical Guide to Quality Management in Spinning, Chapter 4 – Reasons for poor quality in spinning, 2011, pp. 34–119.
32.
TangZFraserWBWangL, et al.
Examining the effects of balloon control ring on ring spinning. Fibers Polym2008;
9: 625–632.
33.
TangZFraserWBWangX.An analysis of yarn breakage in ringspinning. Basic Sci J Text Univ2018;
31: 272–280.
34.
TangZWangXBarrie FraserW, et al.
Simulation and experimental validation of a ring spinning process. Simul Model Pract Th2006;
14: 809–816.
35.
TangZFraserWBWangX.Modelling yarn balloon motion in ring spinning. Appl Math Modell2007;
31: 1397–1410.
36.
LordPR.Handbook of yarn production: Technology, science and economics, 1st ed.
Cambridge:
Woodhead Publishing, 2003.
37.
HossainMAbdkaderANockeA, et al.
Measurement methods of dynamic yarn tension in a ring spinning process. Fibres Text East Eur2016;
24: 36−43.
