To demonstrate the limits of open-end rotor spinning, the outstandingly contaminated slivers were prepared from various blowroom waste mixed with virgin cotton and noils and processed to yarn. The aim was to simulate the processing of highly contaminated cotton waste to open-end rotor yarn sustainable way and analyze the impact of trash, dust, or fiber neps in slivers to yarn quality. To verify whether the dyeing of these yarn for given final use should be adjusted, yarns with high rustic appearance and yarns containing 20% residual bleached and optically brightened fibers possibly not evenly distributed are analysed before and after dyeing. The experiment proves that the processing of 98tex and 29.5tex yarns from outstandingly contaminated sliver via R37 with exchangeable trash channel is possible at acceptable quality for denim, home textile, or linen and ensures most of the demands related to user properties and durability, including uniform staining.
DockrayGHMeadowstB, andSmithL.Cotton waste. Text Res J1950;
20: 684.
7.
KaplanSGöktepeÖ.Investigation into navel selection for rotor spinning machine using cotton waste. Fibers Text East Eur2006;
14: 57.
8.
HalimiMTHassenMBAzzouzB, et al.
Effect of cotton waste and spinning parameters on rotor yarn quality. J Text Inst2007;
98: 437.
9.
HalimiMTAzzouzBAHassenBM, et al.
Influence of spinning parameters and recovered fibers from cotton waste on the uniformity and hairiness of rotor spun yarn. J Engd Fibers Fabric2009;
4: 36–44.
10.
KhanKRHossainMM, andSarkerR.Ch. Statistical analyses and predicting the properties of cotton/waste blended open end rotor yarn using Taguchi OA Design. Int J Text Sci2015;
4: 27–35.
11.
KilicMKilicGBTiryakiE, et al.
Effects of waste cotton usage on properties of OE – rotor yarns and knitted fabrics. Ind Text2019;
70: 216–222.
12.
HassaniHTabatabaeiSA.Determining the optimum spinning conditions to produce the rotor yarns from cotton wastes. Ind Text2019;
6: 259–264.
13.
HassaniHTabatabaeiSA.Optimizing spinning variables to reduce the hairiness of rotor yarns produced from waste fibers collected from the ginning process. Fiber Text East Eur2011;
19 3: 21–25.
14.
DuruPNBabaarslanO.Determining an optimum opening roller speed for spinning Polyester blend rotor yarns. Text Res J2003;
73: 907.
15.
YuksekkayaMECelepGDoganG, et al.
A comparative study of physical properties of yarn and fabrics produced from virgin and recycled fibers. J Engrd Fiber Fabric2016;
11: 68–76.
16.
GunADAkturkHNMacitAS, et al.
Dimensional and physical properties of socks made from reclaimed fiber. J Text Inst2014;
105: 1108.
17.
IshtiaqueSMDasA.Characterization of grey and dyed cotton fibres as well as waste at different stages of for rotor spinning process. Indian J Fiber Text Res2003;
28: 65–70.
18.
TelliABabaarslanO.Commercialized denim fabric production with post-industrial and post-consumer wastes. Textil ve Konfeksiyon2016;
26: 213–220.
19.
SpataforaJSchwipplH.The ideal rotor spinning process for a high short-fiber content. Technology and Process Analytics Rieter Machines and Systems June, 2020.
20.
SchwipplH.The increasing importance of recycling in the staple-fibre spinning process.
Winterthur, Switzerland:
Rieter Machine Works Ltd, December, 2020.
21.
WangZ.Recycling in textiles.
Woodhead:
Cambridge, 2006.
EN ISO 139 Textiles—Standard atmospheres for conditioning and testing, 2005.
24.
EN 12751Textiles—Sampling of fibres, yarns and fabrics for testing, 2000.
25.
EN ISO 2060Determination of linear density (mass per unit length) by the skein method, 1996.
26.
ČSN 80 0706 Evaluation of material irregularity of threads, rovings and slivers, 1992.
27.
EN ISO 2062 (800700)Textiles—Yarns from packages—Determination of single-end breaking force and elongation at break using constant rate of extension (CRE) tester, 2010.
28.
IN 32-102-01/01 Evaluation of yarn abrasion resistance, FT TUL 2009.
29.
Lawson Hemphill. CTT constant tension transport: User manual, 2004. Swansea, USA.
30.
ISO 105-A02Textiles—Tests for colour fastness—Part A02: Grey scale for assessing change in colour, 1993.
