The eri cocoons are open mouthed and as their silk filaments are discontinuous, these can only be used for spun yarn production. In this study, the effect of fiber length and comber noil extractions on yarn quality were evaluated. The significant impact of fiber length as well as first and second comber noil extraction was observed on yarn unevenness, imperfections, tenacity, breaking elongation and hairiness. With the aim of minimizing unevenness, imperfections and hairiness along with maximizing tenacity and breaking elongation of yarn; the fiber length and comber noil were optimized using Minitab 19 software. It was revealed that 150 mm fiber length can be set in the staple cutter during spinning preparatory for all yarn counts; 19% and 7% comber noil extractions are required for first and second combing, respectively, to produce 40 and 60 Nm yarns, whereas for 80 Nm yarn about 1% more noil extraction is needed in both combing processes. Principal component analysis depicted that both two comber noil contribute about 57% and fiber length of 43% on yarn quality. Regression equations from the response surface design of the experiment were derived for different yarn quality characteristics which exhibit a difference between actual and predicted values of below 10%.
JollyMSSenSKSonwalkarTN, et al.Manuals on Sericulture: Non-Mulberry silks. FAO Agriculture Service Bulletin.
Rome:
Food and Agricultural Organization of the United Nations, 1979;
4: 160–162.
2.
KomatsuK.Structure of silk yarn, Chemical structure and processing of silk yarn, Chemical and structural characteristics of wild silk cocoon and silk. A. Gopal trans., D. Mahadevappa, ed. Ueda, Japan: Shinshu University, 1980; 2: 21–46.
ChattopadhyayDMunshiRPadakiNV, et al.Spinning of eri silk yarn using Amber Charkha technique. Ind. Silk2010;
1: 18–20.
7.
ArmitageL.The production of spun silk yarns. J. Text. Inst1935;
26: 247–262. doi: 10.1080/19447013508662763
8.
KariyappaCSomashekarTHRoyS, et al.Large scale mill spinning of eri cocoons- a possibility. Ind Silk2006;
46: 19–23.
9.
KariyappaCRoySSomashekarTH.Eri silk noil spinning and its characterization. Ind. Silk2005;
45: 15–18.
10.
KulkarniPRBahuguniRS.Optimum machinery, process and products for eri silk/wool blends. Proceedings for National Seminar cum Workshop on Recent R & D initiatives and Developmental Schemes of Wool and Woollens 28th May, Mumbai, India; 6–12.
11.
KariyappaCKumarSN.Large scale mill spinning of floss waste and its yarn characterization. Ind Silk2011;
2: 22–25.
12.
ChollakupRLopezLSimoinneriA, et al.Eri silk as blended material with cotton for ring spinning. Text Asia2004;
35: 25–27.
13.
KumarRChattopadhyayRSharmaIC.Production of silk and silk polyester blended yarns in cotton system. Text Asia2001;
32: 32–34.
14.
KumarRChattopadhyayRSharmaIC.Feasibility of spinning silk/silk blends on cotton system. Text Asia2001;
32: 27–31.
15.
ChoudhuryPKMazumdarPKSarkarB.Studies on tensile properties of eri/acrylic blended yarn. Ind J Fib Text Res2013;
38: 66–73.
16.
ChellamaniKPNagarajanGKumarVJ, et al. Processing of silk/cotton blends in short staple ring spinning system – some studies. SITRA Research Report, vol. 52. Coimbatore, India: The South India Textile Research Association (SITRA), 2007.
17.
LarsenSA.Combing performance of compressed and stored wool. J Text Inst1965;
56: 161–167. doi: 10.1080/19447026508662271
18.
LambPR.The effect of spinning draft on irregularity and faults; Part II: experimental studies. J Text Inst1987;
78: 101–111. doi: 10.1080/00405008708631828
19.
LappageJ.Proposals towards improving worsted processing; Part 1: identification and theoretical evaluation of possibilities for optimising the drawing sequence. J Text Inst2010;
101: 336–342. doi: 10.1080/00405000802421066
20.
LappageJ.Proposals towards improving worsted processing; Part 2: experimental evaluation of proposed improved processing sequences. J Text Inst2010;
101: 801–804. doi: 10.1080/00405001003718987
21.
BrattRL.The effect of staple strength on worsted processing; Part III: fibre length distribution and spinning. J Text Inst1965;
56: 62–72. doi: 10.1080/19447026508662259
22.
SrivastavaTVKOnionsWJTownendPP.The variation in hairiness with the depth of layer of a worsted spun yarn package. J Text Inst1977;
68: 86–87. doi: 10.1080/00405007708631473
23.
ASTM D 6500-00:Standard test method for diameter of wool and other animal fibres using optical fibre diameter analyzer.
West Conshohocken, PA, USA:
ASTM International, American Society for Testing and Materials, 2012, pp. 647–658.
24.
ASTM D 1577-07:Standard test methods for linear density of textile fibres.
West Conshohocken, PA, USA:
ASTM International, American Society for Testing and Materials, 2012, pp. 381–389.
25.
ASTM D 3822/D 3822M-14: Standard test method for tensile properties of single textile fibres.
West Conshohocken, PA, USA:
ASTM International, American Society for Testing and Materials, 2014, pp. 860–869.
26.
BS 4784-1973: Determination of correct invoice mass (weight) of textiles, Handbook 11, Section 1.
London, UK:
British Standard Institution, 1974, pp. 15–17.
27.
ChattopadhyayDChakrabortyAChatterjeeSM.Fibre length of eri silk cocoons and influence of staple cutting during spinning preparatory processes. J Nat Fibres2020;
19: 2660–1674. doi: 10.1080/15440478.2020.1821286
28.
BoxGEPBehnkenDW.Some new three level designs for the study of quantitative variables. Technometrics1960;
2: 455–475. doi: 10.2307/1266454
29.
ASTM D 1907/D 1907 M-01: Standard test method for linear density of yarn (yarn count) by the skein method.
West Conshohocken, PA, USA:
ASTM International, American Society for Testing and Materials, 2019, pp. 447–455.
30.
ASTM D 1425/1425 M-14: Standard test method for evenness of textile strands using capacitance testing equipment.
West Conshohocken, PA, USA:
ASTM International, American Society for Testing and Materials, 2019, pp. 330–334.
31.
ASTM D 2256/D 2256 M-10:Standard test method for tensile properties of yarns by the single- strand.
West Conshohocken, PA, USA:
ASTM International, American Society for Testing and Materials, 2015, pp. 542–554.
32.
ASTM D 5647-07: Standard guide for measuring hairiness of yarns by the photoelectric apparatus.
West Conshohocken, PA, USA:
ASTM International, American Society for Testing and Materials, 2019, pp. 317–319.
33.
ASTM D 1776/1776-M:Standard practice for conditioning and testing of textiles.
West Conshohocken, PA, USA:
ASTM International, American Society for Testing and Materials, 2015, pp. 418–422.
34.
ChattopadhyayDChakrabortyAChatterjeeSM.Studies on structural and fibre quality characteristics of eri silk cocoons in different seasons and places. J Text Inst2018;
109: 543–551. doi: 10.1080/00405000.2017.1361118
35.
BISFA. Determination of fibre length.
Brussels, Belgium:
International Bureau for Standardization of Manmade Fibres, 1998;
8: 30–35.
36.
IWTO-17. Determination of fibre length and distribution parameters by means of the almeter.
Brussels, Belgium:
International Wool Textile Organization, 2011, pp. 2–11.
37.
N. Schlumberger & Cie. Fibre to yarn system, training study materials. Rue de la Republique, Guebwiller Cedex, France, 1994, pp. 70–81.
38.
Schlafhorst. Technical Information Bulletin for Zinser 451 ring spinning, Zweigniederlassung der Saurer Germany GmbH & Co. KG, Übach-Pallenberg, Germany, 2015, pp. 19–21.
39.
LipenkovY.Wool spinning: wool combing. Trans. N. Chermysheva.
Moscow:
Mir Publishers, 1983,
2: 106–125.
40.
ChellamaniKPChattopadhyayDThanabalV.Influence of wire point density in cards and combers on neps in sliver and yarn quality. Ind J Fibre Text Res2001;
28: 9–15.
LeeCSP.Quality control aspects of worsted processing – training study materials.
Ilkley, Yorkshire, UK:
IWS Development Centre, Commercial Development Department, 1993, pp. 27–37.
43.
LinQYanGYuC.Effect of fibre length distribution and fineness on theoretical unevenness of yarn. J Text Inst2011;
102: 214–219. doi: 10.1080/00405001003616793
44.
GoswamiBCMartindaleJGScardinoFL.Textile yarns: technology, structure and applications, Uniformity characteristics of yarns.
Toronto, Canada:
John Willey & Sons Inc., 1977;
2: 219–231.
GoswamiBCMartindaleJGScardinoFL.Textile yarns: technology, structure and applications. Uniformity characteristics of yarns.
Toronto, Canada:
John Willey & Sons Inc., 1977;
2: 182–216.
47.
ChellamaniKPChattopadhyayDThanabalV.Indian cottons and influence of mechanical processing on nep generation. Asian Text J1999;
8: 120–126.
48.
ChellamaniKPChattopadhyayDThanabalV.Influence of wire point density in cards and combers on neps in sliver and yarn quality. Ind J Fibre Text Res2003;
28: 9–15.
49.
ASTM D 1770-94: Standard test method for neps, vegetable matter and coloured fibre in wool top. West Conshohocken, PA, USA:ASTM International, American Society for Testing and Materials, 2000, pp. 1–6.
50.
PokharnaAKBanalDLPatniPC.Effect of fibre characteristics on worsted spinning. Ind J Text Res1980;
5: 131–133.
51.
ChellamaniKPKumaarVJVittopaMK.Achievable levels of yarn elongation and hairiness based on fibre properties and process variables. SITRA Res. Report, vol. 51.
Coimbatore, India:
The South India Textile Research Association (SITRA), 2006.
52.
BarellaA.New features of hairiness studies. J Text Inst1978;
69: 379–384. doi: 10.1080/00405007808631505
53.
ViswanathanGMunshiVGUkidveAV, et al.A critical evaluation of the relationship between fibre quality parameters and hairiness of cotton yarns.. Text Res J1989;
59: 707–711. doi: 10.1177/004051758905901115
54.
CelikPKadogluH.Research on the compact spinning for long staple yarns. Fibres Text East Europe2004;
12: 27–31.
55.
ChengKPSYuC.A study of compact spun yarns. Text Res J2003;
73: 345–349. doi: 10.1177/004051750307300412
56.
KrupincovaG.Yarn hairiness versus quality of cotton fibre. Ind J Fibre Text Res2013;
38: 223–229.
57.
JolliffeIT.Principal component analysis: Graphical representation of data using principal components.
New York:
Springer Verlag, 1986;
2: 78–108.
