Synthesis of poly(styrene-N-hydroxymethyl acrylamide) microspheres and their application in patterned photonic crystals

Abstract

In order to achieve bright and durable structural colors, the poly(styrene-N-hydroxymethyl acrylamide) nanospheres with self-crosslinking property were used as structural units to construct patterned photonic crystals. In this article, we thoroughly explore the effect of synthesis factors on particle sizes and monodispersity of poly(styrene-N-hydroxymethyl acrylamide) nanospheres, with the characterization of the performance of prepared poly(styrene-N-hydroxymethyl acrylamide) nanospheres. Then the color effects and durability of structural colors produced from poly(styrene-N-hydroxymethyl acrylamide) photonic crystals were characterized and evaluated. The results showed that the monodisperse poly(styrene-N-hydroxymethyl acrylamide) nanospheres with particle sizes ranging between about 200∼320 nm could be synthesized. The prepared poly(styrene-N-hydroxymethyl acrylamide) nanospheres exhibit typical core-shell structure, in which the hydrophobic polystyrene domain is mainly located on the core, and there is a thin shell mainly rich in hydrophilic Poly(N-hydroxymethyl acrylamide) covering the polystyrene core. Moreover, the poly(styrene-N-hydroxymethyl acrylamide) nanospheres have self-crosslinking properties, which could be confirmed by the thermogravimetric curve. Furthermore, the photonic crystals constructed by prepared poly(styrene-N-hydroxymethyl acrylamide) nanospheres still present vivid and durable structural colors after friction, bending, washing and soaking tests. Specifically, the patterned photonic crystals can be constructed on photo paper, plastic board and fabrics, and the resultant structural colors present significantly iridescent effects. The research results can provide strategic support for the practical application of photonic crystals with structural colors.

Keywords

P(St-NMA) nanospheres patterned photonic crystals structural colors vividness durability

Get full access to this article

View all access options for this article.

References

Nassau

Stork

DG.

The physics and chemistry of color: the fifteen causes of color. Phys Today 1984; 37: 70.

Zhou

Zhang

, et al. Rapid fabrication of vivid noniridescent structural colors on fabrics with robust structural stability by screen printing. Dyes Pigm 2020; 176: 108226.

D’Alba

Kieffer

Shawkey

MD.

Relative contributions of pigments and biophotonic nanostructures to natural color production: a case study in budgerigar (Melopsittacus undulatus) feathers. J Exp Biol 2012; 215: 1272–1277.

Sai

Wilts

Sicher

, et al. When black and white make green: the surprising interplay of structure and pigments. Chimia (Aarau) 2019; 73: 47–50.

Yaman

Ozdogan

Seventekin

Improvement fastnesses and color strength of pigment printed textile fabric. J Eng Fibers Fabr 2012; 7: 155892501200700207.

Hinsch

Weber

Chen

H-L

, et al . Colorfastness of extracted wood-staining fungal pigments on fabrics: A new potential for textile dyes. J Text Appar Technol Manag 2015; 9: 1–11.

Tippets

Donev

, et al. Structural colors: from natural to artificial systems. Wiley Interdiscip Rev Nanomed Nanobiotechnol 2016; 8: 758–775.

Kou

Lin

, et al. Bioinspired bowl-array enabled angle-independent and fast responsive photonic colors for environmental sensing. Chem Eng J 2022; 430: 132805.

Sun

Bhushan

Tong

Structural coloration in nature. RSC Adv 2013; 3: 14862–14889.

10.

Nie

, et al. Chameleon-inspired iridescent structural color textiles with reversible multiple stimulus-responsive functions. Chem Eng J 2022; 433: 134410.

11.

Shevtsova

Hansson

Janzen

, et al. Stable structural color patterns displayed on transparent insect wings. Proc Natl Acad Sci USA 2011; 108: 668–673.

12.

Afzal

Petrin

Weiss

SM.

Camera detection and modal fingerprinting of photonic crystal nanobeam resonances. Opt Express 2019; 27: 14623–14634.

13.

Ghiradella

Light and color on the wing: structural colors in butterflies and moths. Appl Opt 1991; 30: 3492–3500.

14.

Aly

Mohamed

Elsayed

, et al. Fano resonance by means of the one-dimensional superconductor photonic crystals. J Supercond Nov Magn 2018; 31: 3827–3833.

15.

Wang

Wen

, et al. Simple fabrication of full color colloidal crystal films with tough mechanical strength. Macromol Chem Phys 2006; 207: 596–604.

16.

Wang

Lin

Schäfer

, et al. Spray synthesis of photonic crystal based automotive coatings with bright and angular‐dependent structural colors. Adv Funct Mater 2021; 31: 2008601.

17.

Niu

Zhang

Wang

, et al. Multicolored photonic crystal carbon fiber yarns and fabrics with mechanical robustness for thermal management. ACS Appl Mater Interfaces 2019; 11: 32261–32268.

18.

Meng

Umair

Iqbal

, et al. Rapid fabrication of noniridescent structural color coatings with high color visibility, good structural stability, and self-healing properties. ACS Appl Mater Interfaces 2019; 11: 13022–13028.

19.

Kong

Meng

Zhang

, et al. Self-supporting structural color films with excellent stability and flexibility through hot-press assisted assembly. Dyes Pigm 2021; 195: 109742.

20.

Shen

Structurally colored films with superhydrophobicity and wide viewing angles based on bumpy melanin-like particles. Appl Surf Sci 2018; 427: 1129–1136.

21.

Shao

Sheng

Wang

, et al. Solvent-free fabrication of tough self-crosslinkable short-fluorinated copolymer nanocoatings for ultradurable superhydrophobic fabrics. Chem Eng J 2021; 416: 128043.

22.

Huang

Cheng

, et al. Facile self-crosslinking to improve mechanical and durability of polynorbornene for alkaline anion exchange membranes. Int J Hydrog Energy 2020; 45: 13068–13079.

23.

Shao

Zhang

, et al. Preparation of monodispersed polystyrene nanospheres and self-assembly of photonic crystals for structural colors on polyester fabrics. J Text Inst 2014; 105: 938–943.

24.

Hao

, et al. Synthesis and characterization of self-crosslinking fluorinated polyacrylate soap-free latices with core–shell structure. Appl Surf Sci 2013; 268: 373–380.

25.

Olmos

Martín

González-Benito

New molecular-scale information on polystyrene dynamics in PS and PS–BaTiO₃ composites from FTIR spectroscopy. Phys Chem Chem Phys 2014; 16: 24339–24349.

26.

Al-Kadhemy

MFH

Hussein

Saeed

AAM.

Gamma irradiation effect on structural properties of copper doped polystyrene films. J Appl Chem Sci Int 2016; 5: 83–92.

27.

Painter

Sobkowiak

Park

Vibrational relaxation in atactic polystyrene: an infrared spectroscopic study. Macromolecules 2007; 40: 1730–1737.

28.

Kaniappan

Latha

Certain investigations on the formulation and characterization of polystyrene/poly (methyl methacrylate) blends. Int J Chemtech Res 2011; 3: 708–717.

29.

Manikandan

XRD, FTIR and the optical studies of pure polystyrene film. Int J Recent Innov Trends Comput Commun 2014; 2: 1148–1145.

30.

Canto

Mantovani

DeAzevedo

, et al. Molecular characterization of styrene-butadiene-styrene block copolymers (SBS) by GPC, NMR, and FTIR. Polym Bull 2006; 57: 513–524.

31.

Zhang

Zhou

An FTIR standard addition method for quantification of bound styrene in its copolymers. Polym Test 2008; 27: 153–157.

32.

Liu

X-M

Pramoda

Yang

Y-Y

, et al. Cholesteryl-grafted functional amphiphilic poly (N-isopropylacrylamide-co-N-hydroxylmethylacrylamide): synthesis, temperature-sensitivity, self-assembly and encapsulation of a hydrophobic agent. Biomaterials 2004; 25: 2619–2628.

33.

Kurşun F and Işıklan

Synthesis, characterization, and swelling behavior of poly (N‐hydroxymethylacrylamide) grafted poly (vinyl alcohol). J Appl Polym Sci 2020; 137: 49014.

34.

Ozdemir

Mazi

pH and thermo sensitive superabsorbent poly (N-hydroxymethylacrylamide-co-itaconic acid) hydrogels: synthesis, characterization and kinetic studies. J Macromol Sci A 2014; 51: 983–989.

35.

Chen

Chang

HS.

Kinetics and mechanism of emulsifier‐free emulsion polymerization. III. Styrene/nonionic comonomer (2‐hydroxyethyl methacrylate) system. J Polym Sci A Polym Chem 1990; 28: 2547–2561.