Firefighters frequently have to work in direct solar radiant heat. To reduce firefighter heat stress, the influence of turnout garment properties on heat gain from solar radiation must be understood. This research studied the effects of color, texture, washing, and contamination of outer shell fabrics on heat loss through firefighter turnout fabric materials in simulated solar exposures. It showed that solar radiation could be a major factor in heat loss through turnout suits. Solar radiation equivalent to a sunny day completely reversed heat exchange through the turnout fabric systems, converting a heat loss of about 240 W/m2 to a heat gain exceeding 100 W/m2. Solar radiation caused turnout fabric systems to dry out and this decreased the performance of turnout systems that incorporated bi-component moisture barriers. Most significantly, the color of the outer shell had a major influence on lowering turnout heat loss in solar exposures. Composites with a black-dyed outer shell absorbed more solar energy than composites with lighter colored shell materials. Soot and fire-ground contaminants present on turnout outer shell fabrics also reduced heat loss under solar exposure. The findings of this study answered long-standing questions about the importance of turnout fabric color on heat exchange with the environment. The results provide additional motivation for efficient turnout cleaning practices, not only to reduce potentially toxic exposure to smoke contaminants, but to reduce turnout-gear-related heat strain on firefighters.
McQuerryMBarkerRDenHartogE.Relationship between novel design modifications and heat stress relief in structural firefighters’ protective clothing. Appl Ergon2018;
70: 260–268.
2.
BarkerR.Evaluating the heat stress and comfort of firefighter and emergency responder protective clothing. In: SongG (ed) Improving comfort in clothing.
Cambridge:
Woodhead Publishing, 2011, pp. 305–319.
3.
SongGPaskalukSSatiR, et al.
Thermal protective performance of protective clothing used for low radiant heat protection. Text Res J2011;
81: 311–323.
4.
McQuerryMDenHartogEBarkerR.Evaluating turnout composite layering strategies for reducing thermal burden in structural firefighter protective clothing systems. Text Res J2017;
87: 1217–1225.
5.
WangYZongYLiJ, et al. Evaluating the moisture transfer property of the multi-layered fabric system in firefighter turnout clothing. Fibres Text East Eur2011;
19: 101–105.
6.
GaoHDeatonASFangX, et al. Effects of environmental temperature and humidity on evaporative heat loss through firefighter suit materials made with semi-permeable and microporous moisture barriers. Text Res J2021; doi:10.1177/00405175211026537.
7.
BarkerRLHenifordRC.Factors affecting the thermal insulation and abrasion resistance of heat resistant hydro-entangled nonwoven batting materials for use in firefighter turnout suit thermal liner systems. J Eng Fibers Fabr2011;
6: 1–10.
8.
McQuerryMDenHartogEBarkerR.Impact of reinforcements on heat stress in structural firefighter turnout suits. J Text Inst2018;
109: 1367–1373.
9.
LiJBarkerRLDeatonAS.Evaluating the effects of material component and design feature on heat transfer in firefighter turnout clothing by a sweating manikin. Text Res J2007;
77: 59–66.
10.
RathodAPSMittalPKumarB. Analysis of factors affecting the solar radiation received by any region. In: 2016 international conference on emerging trends in communication technologies, Dehradun, India, 18–19 November, 2016, pp.1–4.
11.
SolaimanianMKennedyTW.Predicting maximum pavement surface temperature using maximum air temperature and hourly solar radiation. Transp Res Rec1993: 1–11.
12.
ClarkJACenaK.Net radiation and heat transfer through clothing: the effects of insulation and colour. Ergonomics1978;
21: 691–696.
13.
HavenithGWangXDenHartogE, et al. Interaction effects of radiation and convection measured by a thermal manikin wearing protective clothing with different radiant properties. In: Proceedings of the third international conference on human-environmental system, Tokyo, Japan, 12–15 September 2005, pp.47–50.
14.
FukazawaTDenHartogEDaanenHA, et al. Radiant heat transfer network in the simulated protective clothing system under high heat flux. In: Proceedings of the third international conference on human–environment system, Tokyo, Japan, 12–15 September 2005, pp.435–438.
15.
DenHartogEHavenithG.Analytical study of the heat loss attenuation by clothing on thermal manikins under radiative heat loads. Int J Occup Saf Ergon2010;
16: 245–261.
16.
BanksAPWWangXEngelsmanM, et al.
Assessing decontamination and laundering processes for the removal of polycyclic aromatic hydrocarbons and flame retardants from firefighting uniforms. Environ Res2021;
194: 110616.
17.
ShimazakiYGotoSYoshidaA, et al.
The effect of solar radiation on temperature distribution in outdoor human–clothing–environment systems. Int J Heat Mass Transf2017;
104: 1–6.
18.
QuintiereJ.Radiative characteristics of fire fighters’ coat fabrics. Fire Technol1974;
10: 153–161.
19.
CollinAMarchandAKadiA, et al.
Study on visible–IR radiative properties of personal protective clothings for firefighting. Fire Saf J2015;
71: 9–19.
20.
LeiZQianXZhangX.Assessment of thermal protective performance of firefighter’s clothing by a sweating manikin in low-level radiation. Int J Clothing Sci Technol2019;
31: 145–154.
21.
BrödePKuklaneKCandasV, et al.
Heat transfer through protective clothing under symmetric and asymmetric long wave thermal radiation. Z Arb Wiss2008;
62: 267–276.
22.
BrödePKuklaneKCandasV, et al.
Heat gain from thermal radiation through protective clothing with different insulation, reflectivity and vapour permeability. Int J Occup Saf Ergon2010;
16: 231–244.
23.
GuanMAnnaheimSCamenzindM, et al.
Moisture transfer of the clothing–human body system during continuous sweating under radiant heat. Text Res J2019;
89: 4537–4553.
24.
GuanMPsikutaACamenzindM, et al.
Effect of perspired moisture and material properties on evaporative cooling and thermal protection of the clothed human body exposed to radiant heat. Text Res J2019;
89: 3663–3676.
25.
ASTM F1939-15. Standard test method for radiant heat resistance of flame resistant clothing materials with continuous heating, www.astm.org/f1939-15r20.html (2020, accessed 01 November 2021).
26.
ISO 6942:2002. Protective clothing — protection against heat and fire — method of test: evaluation of materials and material assemblies when exposed to a source of radiant heat, www.iso.org/standard/26327.html (2002, accessed 01 November 2021).
27.
DenHartogE.Challenges in future personal protective equipment–an overview of developments in user needs. Res J Text Apparel2010;
14: 22–37.
28.
BarkerRFangXDeatonS, et al.
Identifying factors that contribute to structural firefighter heat strain in North America. Int J Occup Saf Ergon2021: 1–10.
29.
HesLde AraujoM.Simulation of the effect of air gaps between the skin and a wet fabric on resulting cooling flow. Text Res J2010;
80: 1488–1497.
30.
TawfikMTonnellierXSansomC.Light source selection for a solar simulator for thermal applications: a review. Renew Sust Energ Rev2018;
90: 802–813.
31.
KrusiPSchmidR.The CSI 1000 W lamp as a source for solar radiation simulation. Sol Energy1983;
30: 455–462.
32.
Al-AboosiFY.Models and hierarchical methodologies for evaluating solar energy availability under different sky conditions toward enhancing concentrating solar collectors use: Texas as a case study. Int J Energy Environ Eng2020;
11: 177–205.
YooSBarkerRL.Comfort properties of heat-resistant protective workwear in varying conditions of physical activity and environment. Part I: thermophysical and sensorial properties of fabrics. Text Res J2005;
75: 523–530.
36.
AkgunMBecerirBAlpayHR.The effect of fabric constructional parameters on percentage reflectance and surface roughness of polyester fabrics. Text Res J2012;
82: 700–707.
37.
HornGPKerberSAndrewsJ, et al.
Impact of repeated exposure and cleaning on protective properties of structural firefighting turnout gear. Fire Technol2020: 1–23.
38.
MayerACHornGPFentKW, et al.
Impact of select PPE design elements and repeated laundering in firefighter protection from smoke exposure. J Occup Environ Hyg2020;
17: 505–514.
ASTM F1868-17. Standard test method for thermal and evaporative resistance of clothing materials using a sweating hot plate, www.astm.org/f1868-17.html (2017, accessed 01 February 2021).
41.
RezazadehMBespflugCJTorviDA, et al.
Predicting mechanical strength of in-use firefighter protective clothing using near-infrared spectroscopy. Fire Technol2018;
54: 1759–1781.
42.
HeJLiJKimE.Assessment of the heat and moisture transfer in a multilayer protective fabric system under various ambient conditions. Text Res J2015;
85: 227–237.
43.
HolmérI.Protective clothing and heat stress. Ergonomics1995;
38: 166–182.
44.
UdayRTalukdarPDasA, et al.
Numerical investigation of the effect of air gap orientations and heterogeneous air gap in thermal protective clothing on skin burn. Int J Therm Sci2017;
121: 313–321.
45.
DengMWangYLiP.Effect of air gaps characteristics on thermal protective performance of firefighters’ clothing: a review. Int J Cloth Sci Technol2018;
30: 246–267.
46.
HeHYuZ.Effect of air gap entrapped in firefighter protective clothing on thermal resistance and evaporative resistance. Autex Res J2018;
18: 28–34.
