In this study, the effect of the heating temperature of the spinneret on the melt electrospinning process under the condition of application of auxiliary heating was investigated, in a systematical and comprehensive way. The temperature distribution of the melt jet during the melt electrospinning process was simulated by finite element software in order to provide a good deal of insight into the experimental results. In addition, high-speed photography was adopted to capture images of jet formation and jet motion during the melt electrospinning process. The experimental results indicated that the cooling rate of the polypropylene jet decreases obviously under the condition of auxiliary heating; in addition, the higher spinneret temperature leads to greater drafting force, a drawing fiber drafting rate, and greater jet whipping motion, which is conducive to secondary drawing and refinement of the jet.
JiangSHouH, et al.
Polyimide nanofibers by “green” electrospinning via aqueous solution for filtration applications. ACS Sustain Chem Eng2016;
4: 4797–4804.
2.
BuivydieneDTodeaAM, et al.
Composite micro/nano fibrous air filter by simultaneous melt and solution electrospinning. J Aerosol Sci2021;
154: 105754.
3.
MolnárK.Shear-aided annular needleless electrospinning. Mater Res Expr2019;
6: 075304.
4.
HochleitnerGJüngstTBrownTD, et al.
Additive manufacturing of scaffolds with sub-micron filaments via melt electrospinning writing. Biofabrication2015;
7: 35002.
5.
AleksanderGRahulSVelmuruganT, et al.
Melt-electrospun fibers for advances in biomedical engineering, clean energy, filtration, and separation. Polym Rev2011;
51: 265–287.
6.
FerdowsACanerDMineA, et al. Biomimicry in bio-manufacturing: developments in melt electrospinning writing technology towards hybrid biomanufacturing. Appl Sci2019;
9: 3540.
7.
BuivydieneDEdvinasKDariusC, et al.
Formation and characterisation of air filter material printed by melt electrospinning. J Aerosol Sci2019;
131: 48–63.
8.
MidoriTKeitaNRyoT, et al. Drug release behavior of a drug-loaded polylactide nanofiber web prepared via laser-electrospinning. J Macromol Sci B2019;
58: 592–602.
9.
JosephEGBudhavaramNDePoloW, et al.
Nanoribbons fabricated by melt electrospinning. Polym J2021;
53: 493–503.
10.
ChenQLiuYDengHJ, et al.
Melt differential electrospinning of polyphenylene sulfide nanofibers for flue gas filtration. Polym Eng Sci2020;
60: 2887–2894.
11.
ZhouHGreenTB andJooYL.The thermal effects on electrospinning of polylactic acid melts. Polymer2006;
47: 97–7505.
12.
ZhmayevEChoD andJooYL.Nanofibers from gas-assisted polymer melt electrospinning. Polymer2010;
51: 4140–4144.
13.
MohammadrezaNAliZRichardK, et al.
Recent advances in core/shell bicomponent fibers and nanofibers: a review. J Appl Polym Sci2018;
135: 46265.
14.
LiYMWangXXYuSX, et al.
Bubble melt electrospinning for production of polymer microfibers. Polymers2018;
10: 1246.
15.
ChenHBLiHYMaXL, et al.
Large scaled fabrication of microfibers by air-suction assisted needleless melt electrospinning. Fiber Polym2016;
17: 576–581.
16.
Lee JK, Ko J, Jun MBG, & Lee PC. Manufacturing and characterization of encapsulated microfibers with different molecular weight poly(?-caprolactone) (PCL) resins using a melt electrospinning technique. Materials Research Express 2016; 3(2): 025301.
17.
Li HY, Bubakir MM, Xia T, Zhong XF, Ding YM, & Yang WM. Mass production of ultra-fine fibre by melt electrospinning method using umbellate spinneret. Materials Research Innovations 2014; 18(sup4), S4 -921 -S4 -925.
18.
Hao MF, Liu Y, He XT, Ding YM, & Yang WM. Factors Influencing Diameter of Polypropylene Fiber in Melt Electrospinning. Advanced Materials Research 2011; 221: 129–134.
19.
Wang XN, Xu Y, Wei QF, Cai YB. Study on Technological Parameters Effecting on Fiber Diameter of Melt Electrospinning. Advanced Materials Research 2011; 1445: 1550–1556.
20.
Ko J, Ahsani V, Yao SX, Mohtaram NK, Lee PC, & Jun MBG. Fabricating and controlling PCL electrospun microfibers using filament feeding melt electrospinning technique. Journal of Micromechanics and Microengineering 2016; 27(2): 025007.
21.
Mu XQ, Zheng YS, Li XQ, et al. Effects of Temperature on Melt Electrospinning: Experiment and Simulation Study. Fibers and Polymers 2021; 22: 964–971.
22.
Shen Y, Liu QS, Deng BY, et al. Experimental study and prediction of the diameter of melt-electrospinning polypropylene fiber. Fibers and Polymers 2016; 17: 1227–1237.
23.
Morikawa K, Vashisth A, Bansala T, et al. Melt Electrospinning Polyethylene Fibers in Inert Atmosphere. Macromolecular Materials and Engineering 2020; 305: 2000106.
