Influence of the hydrodynamic degumming process on the quality of decorticated flax fibers

Abstract

The study explored the impact of the hydrodynamic degumming process applied for decorticated monomorphic flax on fiber quality. The experiment was designed as the first stage of research leading to the development of a method for decorticated flax fiber elementarization and cottonization; in particular, effectively dividing the fiber bundles to ensure low linear density and reducing impurities in the content, to make the fibers suitable for cotton spinning systems. The degumming process of the decorticated fibers covered hydrodynamic disposal of the gluing substances, mainly pectins from the fibers, with use of a specially designed lab-scale Model Device for Physical Degumming of the Flax Fibers. The degummed fibers were tested for linear density, length, impurity content and chemical composition by thermogravimetric analysis combined with the analysis of evolved gases (Fourier transform infrared spectroscopy) and analysis of images of fiber cross-sections and longitudinal views from a scanning electron microscope. The study outcomes allowed us to determine the optimal parameters of the degumming process applied for decorticated flax fibers, in which the obtained fibers were of the highest quality. It was found that the optimal parameters of the process were a bath temperature of 30°C and a degumming process duration of 24 hours. These lab-scale process conditions were used in further work on the degumming process of flax fiber carried out on a semi-technical scale, followed by a mechanical cottonization of the fiber, at the final stage of the technological chain.

Keywords

Decorticated flax fiber fiber elementarization flax fiber degumming cottonization

Get full access to this article

View all access options for this article.

References

Kozłowski R and Horne MN. Decortication and fiber cleaning. Woodhead Publishing Series in Textiles Handbook of Natural Fibers. Woodhead Publishing Limited, Philadelphia; Vol 1. 2012 , pp.132–137.

Mańkowski

Kołodziej

Kubacki

Konopne włókno dekortykowane o niskim poziomie zanieczyszczeń dla zastosowań technicznych. Biuletyn Len i Konopie nr 2019; 33: 8–11.

Ruan P, Raghavan V, Gariepy Y, et al. Characterization of flax water retting of different durations in laboratory condition and evaluation of its fiber properties. Bioresources 2015; 10: 3553–3563.

Danny EA, Henriksson G, Evans JD, et al. Progress in enzyme-retting of flax. J Nat Fiber 2004; 1: 21–47.

Horne MRL, Waldron D, Harwood JL, et al. The production and extraction of flax-fibre for textile fibres. J Biobased Mater Bioenerg 2010; 4: 98–105.

Danny

EA.

Flax - structure, chemistry, retting and processing. In: Müssig IJ (ED) Industrial applications of natural fibres: structure, properties and technical applications. New Jersey, John Wiley & Sons (Wiley); 2010, pp.87–108.

Carter

HR.

The decortication of fibrous plants, with special reference to the Belgian flax industry. J Text Inst Proc Abstr 2008; 4: 231–265.

Danny EA, Himmelsbach DS and Morrison WH III. Biobased fiber production: enzyme retting for flax/linen fibers. J Polym Environ 2000; 8: 103–109.

Danny

EA.

Linen most useful: perspectives on structure, chemistry, and enzymes for retting flax. ISRN Biotechnol 2012; 2013: 1–23.

10.

Evans JD, Danny EA and Foulk JA. Flax-retting by polygalacturonase-containing enzyme mixtures and effects on fiber properties. J Biotechnol 2002; 97: 223–231

11.

Kubacki

Określenie optymalnych poziomów czynników agrotechnicznych w uprawielnu włóknistego do przerobu na włókno metodą dekortykacji . Praca doktorska, Uniwersytet Przyrodniczy w Poznaniu, 2011.

12.

Mańkowski

Kołodziej

Kubacki

Uprawa lnu na nasiona oraz włókno wykorzystywane na cele przemysłowe. Biuletyn Len i konopie 2008; 11: 12–23.

13.

Mańkowski

Kołodziej

Kubacki

Uprawa lnu na nasiona oraz włókno wykorzystywane na cele przemysłowe – II rok prowadzonych doświadczeń. Biuletyn Len i Konopie nr 2009; 12: 40–47.

14.

Kozłowski R, Konczewicz W, Wojtysiak J, et al. Device for processing fibrous raw materials and the method of fibrous plants processing. Patent EP 2242876 B1 No 06812873, 2006: Poland.

15.

Wojtysiak J, Podsiedlik W, Kozłowski R, et al. A process for continuous degumming of fibers of bast plants and a device for continuous degumming of fibers of bast plants. Patent WO 2009/064207 A2, 2009: Poland.

16.

Konczewicz

Kryszak

Nowaczkiewicz

et al . Osmosis phenomena based degumming of bast fibrous plants as a promising method in primary processing. Mol Cryst Liq Cryst 2013; 571: 116–131.

17.

Konczewicz

Kozłowski

Wojtysiak

et al . Fizykomechaniczne pozyskiwanie włókien z roślin łykowych. Nowe włókiennicze techniki wytwórcze w pracach Instytutu Technologii Eksploatacji – Państwowego Instytutu Badawczego, 2012.

18.

Konczewicz

Wojtysiak

The effect of physical factors on the process of physical-mechanical degumming of flax fibers. Text Res J 2015; 85: 380–390.

19.

Konczewicz

Physical phenomena occurring in the process of physical–mechanical degumming of fiber from flax straw. Text Res J 2015; 85: 391–403.

20.

Zimniewska

Zbrowski

Konczewicz

et al . Cottonization of decorticated flax fibers. Fiber Text East Eur 2017; 25: 26–33

21.

PN-EN ISO 1973:2011. Textile fibers - determination of linear density - gravimetric method and vibroscope method.

22.

PN-ISO 6989:2000. Textile fibers - determination of length and length distribution of staple fibers (by measurement of single fibers).

23.

BN-86/7501-10. Determination of waxes and fats content. methods of testing textile products. Flax and hemp fiber, 1986.

24.

BN-86/7501-11. Determination of lignin content. Methods of textile products testing. Flax and hemp fiber, 1986.

25.

BN-77/7529-02. Determination of hemicellulose content. Methods of testing textile products. Flax and hemp fiber, semi-products and textiles, 1977.

26.

PN-92/50092. Determination of cellulose content. Raw materials for the paper industry. Wood. Chemical analysis, 1992.

27.

BN-86/7529-0. Determination of polymerization degree by viscosimetric method. Methods of testing raw materials, semi-products and textiles. Fiber, semi-finished and products made of linen-polyester and linen-polyamide blends, 1986.

28.

Dz.U. 2011 nr 109 poz. 635. Regulation of the Minister of Agriculture and Rural Development of 5 May 2011 on the Method of Determining Percent Content of Impurities in Short Flax Fiber or Hemp Fiber.

29.

Franck RR (ed.) Bast and other fibers. (Woodhead Publishing Series in Textiles). 1st ed. Boca Raton, Florida: Woodhead Publishing Limited. 2005, pp.1–23.

30.

Urbańczyk

Nauka o włóknie. Warsaw: Wydawnictwo Naukowo-Techniczne, 1985.

31.

Siwcow

AN.

Wstępna obróbka włókien łykowych. Warsaw: Polskie Wydawnictwo Techniczne, 1953.

32.

Benitez-Guerreroa

López-Beceirob

Sánchez-Jiménezc

et al . Comparison of thermal behavior of natural and hot-washed sisal fibers based on their main components: cellulose, xylan and lignin. TG-FTIR analysis of volatile products. Thermochim Acta 2014; 581: 70–86.

33.

Dong

Ding

Zheng

et al.

Thermal properties of flax fiber scoured by different methods. Therm Sci 2015; 19: 939–945.

34.

Poletto

Ornaghi Junior

Zattera

SJ.

Native cellulose: structure, characterization and thermal properties. Materials 2014; 7: 6105–6119.

35.

Kim

et al . Thermal properties of bio-flour-filled polyolefin composites with different compatibilizing agent type and content. Thermochim Acta 2006; 451: 181–188.

36.

Almeida

Perré

TGA-FTIR analysis of torrefaction of lignocellulosic components (cellulose, xylan, lignin) in isothermal conditions over a wide range of time durations. Bioresources 2015; 10: 4239–4251.

37.

Konczewicz

Zimniewska

Valera

MA.

Selection of a retting method for extraction of bast fibres as response to challenges in composite reinforcement. Text Res J 2018; 88: 2104–2119.