Vortex spinning technology adopts a high-speed swirling airflow to rotate the fibers with open-ends to form yarn with real twists. The airflow behavior within the nozzle has a great effect on the yarn-formation process. In this study, a three-dimensional calculation nozzle model and corresponding three-dimensional airflow region model were established to enable the numerical calculation; airflow behavior—pressure, velocity, and the turbulent airflow field, and the streamline of airflow—was investigated in the presence of fiber bundles within the vortex spinning nozzle. Hybrid hexahedral/tetrahedral control volumes were utilized to mesh the grids in the calculation region. To consider airflow diffusion and convection in the nozzle, the Realizable k-ε turbulence model with wall function was adopted to conduct the calculation. Dynamic and static pressure values were obtained by numerical analysis to predict the action of the inner surface of nozzle and the wall resistance on the high-speed swirling airflow. The numerical simulation of dynamic airflow behavior can generate great insight into the details of airflow behavior and its distribution characteristics, and is helpful for understanding the spinning mechanism and promoting optimization of the spinning process.
Next steps with the air-jet machine. J20 Air-jet Spinning Machine, Service Brochure, Rieter Machine Works Ltd.
2.
GrayWM. How MVS makes yarn. In: 12th Annual Engineer Fiber Selection® System Conference Papers, New York, May 17–19, 1999.
3.
Next Steps with the J10 Air-Jet Machine, Service Brochure, Rieter Machine Works Ltd.
4.
ShangSSYangJP andYuCW.Numerical simulation of swirling air-flow dynamics in vortex spinning. Text Res J2018;
88(7): 833–843.
5.
Next steps with the Air-Jet Machine. J26 Air-jet Spinning Machine, Service Brochure, Rieter Machine Works Ltd.
6.
Murata Machinery Limited, No.870 Murata Vortex Spinner, Customer Information Brochure.
7.
GuoHFChenZY andYuCW.Simulation of the effect of geometric parameters on tangentially injected swirling pipe air-flow. Comput Fluid2009;
38: 1917–1924.
8.
ZengYC andYuCW.Numerical simulation of air flow in the nozzle of an air-jet spinning machine. Text Res J2003;
73(4): 350–356.
9.
GuoHFChenZY andYuCW.3D numerical simulation of compressible swirl flow induced by means of tangential inlets.Int J Numer Meth Fluid2009;
59(11): 1285–1298.
10.
LiMLYuCW andShangSS.A numerical and experimental study on the effect of the orifice angle of vortex tube in vortex spinning machine.J Text Inst2013;
104(12): 1303–1311.
11.
PeiZG andYuCW.Numerical study on the effect of nozzle pressure and yarn delivery speed on the fiber motion in the nozzle of murata vortex spinning. J Fluid Struct2011;
27(1): 121–133.
12.
GuoHFChenZY andYuCW.Numerical investigation of the function of the slotting-tube in the air-jet spinning.J Text Inst 2010; 101(3): 197–203.
13.
LiMLYuCW andShangSS. Effect of vortex tube structure on yarn quality in vortex spinning machine. Fiber Polymer 2014; 15(8): 1786–1791.
14.
ZengYC.Study on fiber motion in high speed air-flow within the nozzle and its application. PhD Thesis, Shanghai, Donghua University, 2003.
15.
PeiZG andYuCW.Investigation on the dynamic behavior of the fiber in the vortex spinning nozzle and effects of some nozzle structure parameters. Text Res J2014;
85(2): 180–187.
16.
ZengYC andYuCW.Mixed Euler-Lagrange approach to modeling fiber motion in high speed air flow. Appl Math Model2005;
29(3): 253–261.
17.
ZouZYChengLDXiBJ, et al.
Investigation of fiber trajectory affected by some parameter variables in vortex spun yarn.Text Res J2014;
85(2): 180–187.
18.
PeiZGChenGLiuC, et al.
Experimental study on the fiber motion in the nozzle of vortex spinning via high speed photography.J Nat Fiber2012;
9: 117–135.
19.
XieS andZengYC.Turbulent air flow field and fiber whipping motion in the melt blowing process: Experimental study.Ind Eng Chem Res2012;
51(14): 5346–5352.
20.
OhTHKimSD andSongDJ.A numerical analysis of transonic/supersonic flows in the axisymmetric main nozzle of an air-jet loom. Text Res J2001;
71(9): 783–790.
21.
RweiSPPaiHI andWangIC.Fluid simulation of the air-flow in interlacing nozzles. Text Res J2001;
71(7): 630–634.
22.
OrtlekHGNairF andKilikR.Effect of spindle diameter and spindle working period on the properties of 100% viscose MVS yarns.Fibre Text East Eur2008;
16(3): 17–20.
23.
GanZTYuGHeXL, et al.
Numerical simulation of thermal behavior and multicomponent mass transfer in direct laser deposition of co-base alloy on steel. Int J Heat Mass Tran2017;
104: 28–38.
24.
GanZTLiuHLiSX, et al.
Modeling of thermal behavior and mass transport in multi-layer laser additive manufacturing of Ni-based alloy on cast iron. Int J Heat Mass Tran2017;
111: 709–722.
25.
GanZTYuGHeXL, et al.
Surface-active element transport and its effect on liquid metal flow in laser-assisted additive manufacturing. Int Comm Heat Mass Tran2017;
86: 206–214.
26.
ZhaoHJLiXW andWuXX.Numerical investigation of supercritical water turbulent flow and heat transfer characteristics in vertical helical tubes. J Supercrit Fluids2017;
127: 48–61.
27.
HeXLSongLJYuG, et al.
Solute transport and composition profile during direct metal deposition with coaxial powder injection. Appl Surf Sci2011;
258(2): 898–907.
28.
HeXYuG andMazumderJ.Temperature and composition profile during double-track laser cladding of H13 tool steel. J Phys D Appl Phys2010;
43(1): DOI: 10.1088/0022-3727/43/1/015502.
29.
HuangYLYangYQWeiGQ, et al. Boundary coupled dual-equation numerical simulation on mass transfer in the process of laser cladding. Chinese Optics Letters 2008; 6(5): 356–360.
30.
XuJLYangCYZhangW, et al.
Turbulent convective heat transfer of CO2 in a helical tube at near-critical pressure.Int J Heat Mass Tran2015;
80: 748–758.
31.
PostelSWesselSKeilT, et al.
Multicomponent mass transport in organic solvent nanofiltration with solvent mixtures.J Membr Sci2014;
466: 361–369.
32.
FelicelliSDPoirierDR andSungPK.A model for prediction of pressure and redistribution of gas-forming elements in multicomponent casting alloys.Metall Mate Trans B2000; (31): 1283–1292.
33.
EkRMollerK andNormanB.Measurement of velocity and concentration variations in dilute fiber/air suspensions using a laser Doppler anemometer.TAPPI Engineering Conference Proceedings1978;
61(9): 49–52.
34.
MooreEM andShambaughRL.Analysis of isothermal annular jets: Comparison of computational fluid dynamics and experimental data.J Appl Polymer Sci2004;
94(3): 909–922.
35.
HowaldtM andYoganathanAP.Laser-Doppler anemometry to study fluid transport in fibrous assemblies. Text Res J1983;
53(9): 544–551.
36.
KrutkaHM andShambaughRL.Analysis of multiple jets in the Schwarz melt-blowing die using computational fluid dynamics.Ind Eng Chem Res2005;
44(23): 8922–8932.
37.
GuoHF.Study on three-dimensional swirling air-flow and motion of flexible fiber in air-jet spinning nozzle. PhD Thesis, Shanghai, Donghua University, 2009.
38.
SunY andWangX.Optimal geometry design of the melt blowing slot die via the orthogonal array method and numerical simulation.J Text Inst2011;
102(1): 65–69.
39.
SunY andWangX.Optimization of air flow field of the melt blowing slot die via numerical simulation and genetic algorithm.J Appl Polymer Sci2010;
115(3): 1540–1545.
40.
WangCG.Grid generation and visualization for scientific computing.
Beijing:
Science Press, 2011.
41.
ZhuHJ.ANSYS 15.0 Practical Guide to Geometric Modeling and Meshing.
Beijing:
People’s Posts and Telecommunications Press, 2014.
42.
ZhangSFZhangSWangQ, et al.
Fluid-solid coupling analysis of hydraulic slide valve based on moving grid. Hydraulic Pneumatic2017;
12: 60–64.
43.
ShangSSYangJP andYuCW.Numerical simulation of the air-flow field in vortex spinning processing. Text Res J2019;
89(6): 1113–1127.
44.
ShihTHLiouWWShabbirA, et al.
A new k-ε eddy-viscosity model for high Reynolds number turbulent flows-model development and validation. Comput Fluid1995;
24(3): 227–238.
45.
ANSYS, ANSYS FLUENT 17.0 Theory Guide, Beijing: Publishing House of Electronics Industry, 2016.
46.
EleshakyME.CFD investigation of pressure depressions in aerostatic circular thrust bearings. Tribol Int2009;
42(7): 1108–1117.
47.
ThattaiAH.A validation study for turbulent premixed flame propagation in closed vessels. MS Thesis, Department of Mechanical Engineering, Delft University of Technology, Delft, Netherlands, 2010.
