To improve the interfacial adhesion of glass fiber (GF)/epoxy composites, the GF surface was treated by dispersing aliphatic diamine-functionalized multi-walled carbon nanotubes (MWCNTs). Carboxyl MWCNTs were first modified by aliphatic diamine with different alkyl chain lengths and then deposited on the surface of GF. The effect of aliphatic diamine chain lengths on the MWCNTs’ dispersion and interfacial properties of resultant composites was investigated in detail. The results showed that uniform dispersion of MWCNTs and strong fiber/matrix interfacial adhesion could be achieved, based on the grafting of 1,8-octanediamine onto MWCNTs. Compared with the control sample, the interlaminar shear, flexural, and tensile strengths of the treated composites increased by 41%, 29%, and 30%, respectively; the interlaminar fracture toughness and storage modulus in the glass region were significantly enhanced; and the glass transition temperature increased by more than 8°C. This work demonstrates that the carbon nanotubes functionalized by appropriate chain lengths of amine modifier can improve the fiber/matrix interfacial interactions and thus enhance the strength, toughness, and stiffness of fiber-reinforced composites.
PatelJSBodduVMBrennerMW, et al.
Effect of fabric structure and polymer matrix on flexural strength, interlaminar shear stress, and energy dissipation of glass fiber-reinforced polymer composites. Text Res J2016;
86: 127–137.
2.
ThipperudrappaSUllal KiniAHiremathA.Influence of zinc oxide nanoparticles on the mechanical and thermal responses of glass fiber-reinforced epoxy nanocomposites. Polym Compos2020;
41: 174–181.
3.
XiaoHChenFZhangZP, et al.
Dihydromyricetin modification of boron nitride micro-sheets and construction of multilayer thermal conduction pathways in glass fiber reinforced epoxy composites. Compos Part B: Eng2021;
215: 108770.
4.
ZhangJBokovAAGaoSL, et al.
Strong anisotropy and ultralow percolation threshold in multiscale composites modified by carbon nanotubes coated hollow glass fiber. Adv Eng Mater2018;
20: 1800077.
5.
PramanikCGissingerJRKumarS, et al.
Carbon nanotube dispersion in solvents and polymer solutions: Mechanisms, assembly, and preferences. ACS Nano2017;
11: 12805–12816.
6.
WangXQJianWBuyukozturkO, et al.
Degradation of epoxy/glass interface in hygrothermal environment: An atomistic investigation. Compos Part B: Eng2021;
206: 108534.
7.
RiderANQiABrackN, et al.
Polymer nanocomposite–fiber model interphases: Influence of processing and interface chemistry on mechanical performance. Chem Eng J2015;
269: 121–134.
8.
FanZHAdvaniSG.Characterization of orientation state of carbon nanotubes in shear flow. Polymer2005;
46: 5232–5240.
9.
ChandrasekaranVCSAdvaniSGSantareMH.Role of processing on interlaminar shear strength enhancement of epoxy/glass fiber/multi-walled carbon nanotube hybrid composites. Carbon2010;
48: 3692–3699.
10.
SeyhanATTanogluMSchulteK.Mode I and mode II fracture toughness of E-glass non-crimp fabric/carbon nanotube (CNT) modified polymer based composites. Eng Fract Mech2008;
75: 5151–5162.
11.
HeDLSalemDCinquinJ, et al.
Impact of the spatial distribution of high content of carbon nanotubes on the electrical conductivity of glass fiber fabrics/epoxy composites fabricated by RTM technique. Compos Sci Technol2017;
147: 107–115.
12.
AnQTamrakarSGillespieJW, et al.
Tailored glass fiber interphases via electrophoretic deposition of carbon nanotubes: Fiber and interphase characterization. Compos Sci Technol2018;
166: 131–139.
13.
ZhangLSuDJinL, et al.
Polyamide 6 composites reinforced with glass fibers modified with electrostatically assembled multiwall carbon nanotubes. J Mater Sci2012;
47: 5446–5454.
14.
WarrierAGodaraARochezO, et al.
The effect of adding carbon nanotubes to glass/epoxy composites in the fibre sizing and/or the matrix. Compos Part A: Appl Sci Manuf2010;
41: 532–538.
15.
RahmanASRangariVJeelaniS.Thermal and mechanical properties of woven glass fiber reinforced epoxy composites with carbon nanotubes grown in-situ. The Int J Eng Sci2015;
4: 54–61.
16.
SuDJinJZhangL, et al.
Electrostatic layer-by-layer assembly of hierarchical structure of multi-walled carbon nanotubes with glass fiber cloth reinforced epoxy composites. J Macromol Sci B2014;
53: 673–682.
17.
LvPFengYYZhangP, et al.
Increasing the interfacial strength in carbon fiber/epoxy composites by controlling the orientation and length of carbon nanotubes grown on the fibers. Carbon2011;
49: 4665–4673.
18.
PaulyABrunetJVarenneC, et al.
Insight in the interaction mechanisms between functionalized CNTs and BTX vapors in gas sensors: Are the functional peripheral groups the key for selectivity?Sens Actuators, B2019;
298: 126768.
19.
JojibabuPZhangYXRiderAN, et al.
Synergetic effects of carbon nanotubes and triblock copolymer on the lap shear strength of epoxy adhesive joints. Compos Part B: Eng2019;
178: 107457.
20.
SubadraSPYousefSGriskeviciusP, et al.
High-performance fiberglass/epoxy reinforced by functionalized CNTs for vehicle applications with less fuel consumption and greenhouse gas emissions. Polym Test2020;
86: 106480.
21.
ZengSHDuanPPShenMX, et al.
Interface enhancement of glass fiber fabric/epoxy composites by modifying fibers with functionalized MWCNTs. Compos Interface2019;
26: 291–308.
22.
LiJWuZHuangC, et al.
Multiscale carbon nanotube-woven glass fiber reinforced cyanate ester/epoxy composites for enhanced mechanical and thermal properties. Compos Sci Technol2014;
104: 81–88.
23.
ZengSHShenMXDuanPP, et al.
Properties of MWCNT-glass fiber fabric multiscale composites: mechanical properties, interlaminar adhesion, and thermal conductivity. Text Res J2018;
88: 2712–2726.
24.
KhanamAMordinaBTiwariRK.Statistical evaluation of the effect of carbon nanofibre content on tribological properties of epoxy nanocomposites. J Compos Mater2014;
49: 2497–2507.
25.
ZengSHShenMXXueYJ, et al.
A novel strategy to reinforce glass fiber fabric/epoxy composites via modifying fibers with self-assembled multi-walled carbon nanotubes-montmorillonite. Polym Compos2020;
41: 522–534.
26.
ChenJLWangKZhaoY.Enhanced interfacial interactions of carbon fiber reinforced PEEK composites by regulating PEI and graphene oxide complex sizing at the interface. Compos Sci Technol2018;
154: 175–186.
27.
ChauhanSSSinghBPMalikRS, et al.
Detailed dynamic mechanical analysis of thermomechanically stable melt-processed PEK–MWCNT nanocomposites. Polym Compos2018;
39: 2587–2596.
28.
GaoHFanYZengS, et al.
Enhanced interfacial adhesion in glass fiber fabric/epoxy composites employing fiber surface treatment with aminosilane-functionalized graphene oxide. Text Res J2021;
91: 790–801.
29.
ChenJWangKZhaoY.Enhanced interfacial interactions of carbon fiber reinforced PEEK composites by regulating PEI and graphene oxide complex sizing at the interface. Compos Sci Technol2018;
154: 175–186.
30.
YangBXPramodaKPXuGQ, et al.
Mechanical reinforcement of polyethylene using polyethylene-grafted multiwalled carbon nanotubes. Adv Funct Mater2007;
17: 2062–2069.
31.
MeiHSunYYZhangLD, et al.
Acoustic emission characterization of fracture toughness for fiber reinforced ceramic matrix composites. Mater Sci Eng A: Struct2013;
560: 372–376.
32.
EskizeybekVAvciAGülceA.The Mode I interlaminar fracture toughness of chemically carbon nanotube grafted glass fabric/epoxy multi-scale composite structures. Compos Part A: Appl Sci Manuf2014;
63: 94–102.
33.
RahmanMMZainuddinSHosurMV, et al.
Improvements in mechanical and thermo-mechanical properties of e-glass/epoxy composites using amino functionalized MWCNTs. Compos Struct2012;
94: 2397–2406.
34.
WangBCZhouXMaKM.Fabrication and properties of CNTs/carbon fabric hybrid multiscale composites processed via resin transfer molding technique. Compos Part B: Eng2013;
46: 123–129.
35.
WangBWangLZhouG.Preparation and mechanical properties of carbon nanotube-based preform and its hybrid multiscale composites. J Shenyang Aerospace Uni2013;
30: 67–71.
36.
FanZHSantareMHAdvaniSG.Interlaminar shear strength of glass fiber reinforced epoxy composites enhanced with multi-walled carbon nanotubes. Compos Part A: Appl Sci Manuf2008;
39: 540–554.
37.
MengSSWangYZhangBM.Preparation and mechanical properties of MWCNTs modified glass fiber fabrics/epoxy composites disposed by electrostatic flocking method. Acta Mater Compos Sin2015;
32: 989–996.
38.
PattersonBABuschCEBratcherM, et al.
Influence of temperature dependent matrix properties on the high-rate impact performance of thin glass fiber reinforced composites. Compos Part B: Eng2020;
192: 108009.
39.
ShaJLiGChenX, et al.
Simultaneous ultrasonication-assisted internal mixing to prepare MWCNTs-filled epoxy composites with increased strength and thermal conductivity. Polym Compos2016;
37: 870–880.
