The electric conductivity and surface potential distributions of carbon fiber laminated panels with different ply orientations have been investigated. We found that the unidirectional (UD) lamina has higher conductivity along the carbon fiber direction than the perpendicular direction, and equipotential contours also show different gradients along the two directions. The cross-ply (CP) and quasi-isotropic (QI) laminates have the mixed effects of the UD lamina electric conductivity and ply orientations, while the surface potential distributions mostly depend on the surface lamina direction. The conductivity along the thickness direction depends on each lamina and inter-laminar bonding. A finite element analysis model was also developed to show the effect of ply orientation on potential distribution. The CP and QI laminates with 0° surface ply have uniform potential distributions and isotropic electricity behaviors. The results could be used to monitor damage locations and design electric composite materials.
ChungDDL.A review of multifunctional polymer-matrix structural composites. Compos Part B Eng2019;
160: 644–660.
3.
ForintosNCziganyT.Multifunctional application of carbon fiber reinforced polymer composites: electrical properties of the reinforcing carbon fibers – a short review. Compos Part B Eng2019;
162: 331–343.
4.
ChengXZhouHWuZ, et al.
Detection of bending direction and amplitude by electrical resistance measurement of axial carbon fibers in braided composite tube. Text Res J2019;
89: 2500–2508.
5.
AngelidisNIrvingPE.Detection of impact damage in CFRP laminates by means of electrical potential techniques. Compos Sci Technol2007;
67: 594–604.
6.
AngelidisNKhemiriNIrvingPE.Experimental and finite element study of the electrical potential technique for damage detection in CFRP laminates. Smart Mater Struct2004;
14: 147–154.
7.
WangDChungDDL.Comparative evaluation of the electrical configurations for the two-dimensional electric potential method of damage monitoring in carbon fiber polymer-matrix composite. Smart Mater Struct2006;
15: 1332–1344.
8.
ManomaisantiphapSKumarVOkadaT, et al.
Electrically conductive carbon fiber layers as lightning strike protection for non-conductive epoxy-based CFRP substrate. J Compos Mater2020;
54: 4547–4555.
9.
KumarVYokozekiTKarchC, et al.
Factors affecting direct lightning strike damage to fiber reinforced composites: a review. Compos Part B Eng2020;
183: 107688.
10.
XiaoJLiYFanWX.A laminate theory of piezoresistance for composite laminates. Compos Sci Technol1999;
59: 1369–1373.
11.
BensaidSTrichetDFouladgarJ.Electrical conductivity identification of composite materials using a 3-D Anisotropic shell element model. IEEE Trans Magne2009;
45: 1859–1862.
12.
AthanasopoulosNKostopoulosV.A comprehensive study on the equivalent electrical conductivity tensor validity for thin multidirectional carbon fibre reinforced plastics. Compos Part B Eng2014;
67: 244–255.
13.
AthanasopoulosNKostopoulosV.Resistive heating of multidirectional and unidirectional dry carbon fibre preforms. Compos Sci Technol2012;
72: 1273–1282.
14.
ChippendaleRDGolosnoyIOLewinPL, et al.
Transport properties and current flow patterns in homogeneous strongly anisotropic materials.COMPEL2011;
30: 1047–1055.
15.
YamaneTTodorokiA.Analysis of electric current density in carbon fiber reinforced plastic laminated plates with angled plies. Compos Struct2017;
166: 268–276.
16.
ChungDWangS.Carbon fiber polymer-matrix structural composite as a semiconductor and concept of optoelectronic and electronic devices made from it. Smart Mater Struct1999;
8: 161–166.
17.
SelvakumaranLLongQPrudhommeS, et al.
On the detectability of transverse cracks in laminated composites using electrical potential change measurements. Compos Struct2015;
121: 237–246.
18.
MatsuzakiRYamamotoKTodorokiA.Delamination detection in carbon fiber reinforced plastic cross-ply laminates using crack swarm inspection: experimental verification. Compos Struct2017;
173: 127–135.
19.
PanozzoFZappalortoMMaragoniL, et al.
Modelling the electrical resistance change in a multidirectional laminate with a delamination. Compos Sci Technol2018;
162: 225–234.
20.
WanGDongQZhiJ, et al.
Analysis on electrical and thermal conduction of carbon fiber composites under lightning based on electrical-thermal-chemical coupling and arc heating models. Compos Struct2019;
229: 111486.
21.
PotluriPYoungRJRashedK, et al.
Meso-scale strain mapping in UD woven composites. Compos Part A Appl Sci Manuf2009;
40: 1838–1845.
22.
WangDChungDDL.Comparative evaluation of the electrical configurations for the two-dimensional electric potential method of damage monitoring in carbon fiber polymer–matrix composite. Smart Mater Struct2006;
15: 1332–1344.
23.
ZantoutAEZhupanskaOI.On the electrical resistance of carbon fiber polymer matrix composites. Compos Part A Appl Sci Manuf2010;
41: 1719–1727.
24.
TodorokiATanakaMShimamuraY.Measurement of orthotropic electric conductance of CFRP laminates and analysis of the effect on delamination monitoring with an electric resistance change method. Compos Sci Technol2002;
62: 619–628.
25.
YuHHeiderDAdvaniS.A 3D microstructure based resistor network model for the electrical resistivity of unidirectional carbon composites. Compos Struct2015;
134: 740–749.
26.
ParkJBHwangTKKimHG, et al.
Experimental and numerical study of the electrical anisotropy in unidirectional carbon-fiber-reinforced polymer composites. Smart Mater Struct2006;
16: 57–66.
27.
AbryJCBochardSChateauminoisA, et al.
In situ detection of damage in CFRP laminates by electrical resistance measurements. Compos Sci Technol1999;
59: 925–935.
28.
LuLSXingDXieYX, et al.
Electrical conductivity investigation of a nonwoven fabric composed of carbon fibers and polypropylene/polyethylene core/sheath bicomponent fibers. Mater Des2016;
112: 383–391.
29.
VilčákováJSáhaPQuadratO.Electrical conductivity of carbon fibres/polyester resin composites in the percolation threshold region. Eur Poly J2002;
38: 2343–2347.
30.
Chippendale RD, Golosnoy IO. Percolation effects in electrical conductivity of Carbon Fibre Composites. In: IET 8th International Conference on Computation in Electromagnetics (CEM 2011), Wroclaw, Poland, 11-14 April 2011, pp, 186–187. London: IET.
31.
WeberMKamalM.Estimation of the volume resistivity of electrically conductive composites. Poly Compos1997;
18: 711–725.
32.
Rami HA, Zemer H, Rani EH, et al.Piezoresistive fiber-reinforced composites: a coupled nonlinear micromechanical–microelectrical modeling approach. Int J Solids Struct2014;
51: 491–503.
33.
ZappalortoMCarraroPPietrograndeR, et al.
Modelling the electrical resistance of multidirectional laminates with off-axis cracks. Compos Struct2020;
237: 111928.
34.
KuksenkoDDrachB.Effective conductivity of materials with continuous curved fibers. Int J Eng Sci2017;
118: 70–81.
