Mathematical model used for predicting arc-flash protective performance of fabrics based on physical parameters

Abstract

In this study, parameters that may affect the performance of arc-flash protective fabrics were systematically analyzed. Sixteen different commonly used fabrics with different configurations and grammage were produced and investigated, namely four raw materials with different configurations (93:0:5:2, 70:23:5:2, 46:47:5:2, and 23:70:5:2) and four with different grammage (180, 210, 240, and 270 g/m²). It was found that factors had different effects on the arc protective performance. Principal component analysis showed that the four plain weave fabrics of 180 g/m² behaved differently compared with other samples, which was ascribed to the related differences in weave structure. In addition, a predicting mathematical model was developed based on the parameters that have the greatest influence on arc protective performance. The prediction parameters were not added to the structure, but replaced with physical parameters such as air permeability and thermomechanical properties. The adjusted R² was 0.867, which demonstrated the rationality of using multiple linear regression to accurately predict arc protective performance. It was hypothesized that the construction of the mathematical model could contribute to the arc protective fabric evaluation and future researches in this field.

Keywords

Thermal protective performance arc protective fabric arc thermal protective value test multiple linear regression

Get full access to this article

View all access options for this article.

References

IEEE 1584:2018. IEEE guide for performing arc-flash hazard calculations.

Dolez

Izquierdo

Specific testing of protective clothing. In: Dolez

Vermeersch

Izquierdo

(eds) Advanced characterization and testing of textiles. Saint-Hyacinthe, QC, Canada. Woodhead Publishing, 2018, pp.301–349.

ASTM F 1959:2007. Standard test method for determining the arc rating of materials for clothing.

IEC 61482-1-1:2009. Live working – protective clothing against the thermal hazards of an electric arc – part 1-1: test methods – method 1: determination of the arc rating (ATPV or EBT50) of flame resistant materials for clothing.

ASTM F 2675:2013. Standard test method for determining arc ratings of hand protective products developed and used for electrical arc flash protection.

ASTM F 2178:2002. Standard test method for determining the arc rating of face protective products.

Toll

Weaver

JA.

Mathematical model of skin exposed to thermal radiation. Aerosp Med 1969; 40: 2430.

Stoll

Chianta

MA.

Heat transfer through fabrics as related to thermal injury. Ann N Y Acad Sci 1970; 33: 649670.

NFPA 70E:2015. Standard for electrical safety in the workplace.

10.

Campbell

Dini

DA.

Occupational injuries from electrical shock and arc flash events. New York: Springer, 2015.

11.

Short

Eblen

ML.

Medium-voltage arc flash in open air and padmounted equipment. IEEE Trans Ind Appl 2012; 48: 245–253.

12.

Short

TA.

Arc flash analysis approaches for medium-voltage distribution. In: proceedings of the IEEE rural electric power conference, Fort Collins, CO, USA; 26-29 April 2009, vol.47(4), pp.1902–1909. DOI: 10.1109/REPCON.2009.4919429

13.

Stokes AD and Sweeting DK . Electric arcing burn hazards. IEEE Transactions on Industry Applications 2006; 42: 134–141.

14.

Wilkins

Allison

Lang

Effect of electrode orientation in arc flash testing. In: IEEE 40th IAS annual meeting conference record, Hong Kong, China, 2-6 Oct.2005, Hong Kong: IEEE. DOI: 10.1109/IAS.2005.1518348, pp.459–465.

15.

Neal

Bingham

Doughty

RL.

Protective clothing guidelines for electric arc exposure. IEEE Trans Ind Appl 1997; 33: 1041–1054.

16.

Wilkins

Lang

Allison

Effect of insulating barriers in arc flash testing. IEEE Trans Ind Appl 2008; 44: 1354–1359.

17.

Eblen

Short

TA.

Arc flash testing of typical 480-V utility equipment. IEEE Trans Ind Appl 2012; 48: 581–592.

18.

Lee

RH.

The other electrical hazard: electric arc blast burns. IEEE Trans Ind Appl 1982; 1A- 18: 246–251.

19.

Doughty

Neal

Dear

, et al. Testing update on protective clothing and equipment for electric arc exposure. IEEE Ind Appl Mag 1999; 5: 37–49.

20.

ASTM F1959:1999. Standard test method for determining the arc thermal performance value of materials for clothing.

21.

IEC 61482-1:2002. Live working, flame resistant material for clothing for thermal protection of workers—thermal hazards of an electric arc—part 1: test methods.

22.

Hoagland

Golovkov

Maurice

, et al. Clothing in arc flash: four types of arc exposure and the effect of moisture on garment appearance after an arc event. IEEE Trans Ind Appl 2014; 50: 2370–2374.

23.

Golovkov

Hoagland

Schau

, et al. Effect of arc electrode geometry and distance on cotton shirt ignition. IEEE Trans Ind Appl 2015; 51: 36–44.