Structure analysis of needle-punched nonwoven fabrics by X-ray computed tomography

Abstract

Needle-punching conditions determine the structure of nonwoven fabrics and the structure determines their tensile properties. However, the structural parameters of nonwoven fabrics and the relationship between these parameters and tensile properties have not been quantitatively analyzed. Therefore, we analyzed the structure of needle-punched nonwoven fabrics by X-ray computed tomography (XCT). The relationships between the needle-punching conditions, tensile properties, and structural parameters, such as fiber-volume fraction and three-dimensional fiber orientation, were investigated. The fiber-volume fraction in the middle layer of the fabric was clearly larger than that of the bulk above a compression ratio of 1.4. With increasing needle penetration depth, the fibers tended to become oriented both parallel and perpendicular to the normal direction of the fabric plane while avoiding the intermediate direction. A linear relationship was found between the obtained volume fraction of fibers oriented in the normal direction and the tensile strength of the fabric. These results demonstrate that XCT image analysis is effective to evaluate the structure of needle-punched nonwoven fabrics and to design the properties of nonwoven fabrics.

Keywords

needle-punched nonwoven fabric X-ray computed tomography fabric structure fiber-volume fraction fiber orientation tensile strength

Get full access to this article

View all access options for this article.

References

Hearle

JWS

Sultan

MAI

Choudhari

. A study of needled fabrics Part II: effects of the needling process. J Text Inst 1968; 59: 103–116.

Hearle

JWS

Purdy

. The structure of needle punched fabric. Fibre Sci Technol 1971; 4: 81–100.

Hearle

JWS

Choudhari

. 35–A study of needled fabrics Part VII: the transfer of fibres through the web by needling. J Text Inst 1969; 60: 478–496.

Miao

. An experimental study of the needled nonwoven process Part II: fiber transport by barbed needles. Text Res J 2004; 74: 394–398.

Ventura

Ardanuy

Capdevila

et al.

Effects of needling parameters on some structural and physico-mechanical properties of needle-punched nonwovens. J Text Inst 2014; 105: 1065–1075.

Midha

Mukhopadyay

. Bulk and physical properties of needle-punched nonwoven fabrics. Indian J Fibre Text Res 2005; 30: 218–229.

Hearle

JWS

Sultan

MAI

. A study of needled fabrics Part VI: the measurement of punching force during needling. J Text Inst 1968; 59: 237–242.

Watanabe

Miwa

Yokoi

et al.

Predicting the penetrating force and number of fibers caught by a needle barb in needle punching. Text Res J 2004; 74: 417–425.

Hearle

JWS

Purdy

. On the nature of deformation of needled fabrics. Fibre Sci Technol 1972; 5: 113–128.

10.

Hearle

JWS

Purdy

. On resistance to slippage in needled fabrics. Fibre Sci Technol 1978; 11: 127–144.

11.

Gilmore T, Davis H and Mi Z. Tomographic approaches to nonwovens structure definition. National Textile Center Annual Report, USA, September 1994.

12.

Manickam

McCutcheon

. Characterization of polymeric nonwovens using porosimetry, porometry and X-ray computed tomography. J Memb Sci 2012; 407–408: 108–115.

13.

Soltani

Johari

Zarrebini

. Effect of 3D fiber orientation on permeability of realistic fibrous porous networks. Powder Technol 2014; 254: 44–56.

14.

Tausif

Duffy

Grishanov

et al.

Three-dimensional fiber segment orientation distribution using X-ray microtomography. Microsc Microanal 2014; 20: 1294–1303.

15.

Chen

Koker

MKA

Uzun

et al.

In-situ X-ray study of the deformation mechanisms of non-woven polypropylene. Int J Solid Struct 2016; 97–98: 200–208.

16.

Jeon

Kim

et al.

Predicting the tensile strength of needle-punched nonwoven mats using X-ray computed tomography and a statistical model. Fibers Polym 2014; 15: 1202–1210.

17.

Jeon

Choi

et al.

In situ monitoring of structural changes in nonwoven mats under tensile loading using X-ray computer tomography. Composites Part A 2014; 63: 1–9.

18.

Ishikawa

Kim

Oshkosh

. Visualization of a pillar-shaped fiber bundle in a model needle-punched nonwoven fabric using X-ray micro-computed tomography. Text Res J 2017; 87: 1387–1393.

19.

Russell

. Handbook of nonwovens, 1st ed. Cambridge: Woodhead Publishing Ltd, 2006, pp. 227–227.

20.

Bernasconi

Cosmi

Hine

. Analysis of fibre orientation distribution in short fibre reinforced polymers: a comparison between optical and tomographic methods. Compos Sci Technol 2012; 72: 2002–2008.

21.

Herman

. Physics and chemistry of cellulose fibers, Amsterdam Newfork: Elsevier, 1949, pp. 247–247.

22.

Komori

Makishima

. Numbers of fiber-to-fiber contacts in general fiber assemblies. Text Res J 1977; 47: 13–17.