A statistical analysis of low-stress mechanical properties of warp-knitted fabrics

Abstract

Fabric hand is an indispensable characteristic for the selection of fabric and product development and the buying consideration for manufacturers and consumers. However, there is little comprehensive work on the hand feel property of warp-knitted fabrics due to the mainstream natural fibers (cotton, wool and silk) and other fabric structures (woven, weft-knitted and nonwoven). The increasing potential for the wide variety of applications and development of warp-knitted fabrics is not only because its fabric hand gives better determination for fabric marketing, but also because it provides extensive scope for fabric performance and appearance. This paper reports an experimental study on the integrated fabric hand behavior of a series of warp-knitted fabrics made for various apparel applications, such as sportswear, lingerie and leisure wear. These 105 fabrics were produced by varying different physical parameters, including fabric weight and fabric thickness. The Kawabata Evaluation System for Fabric (KES-F) was employed to obtain the fabric hand properties (primary hand value and total hand value) related with stiffness, smoothness and softness. All low-stress mechanical properties and fabric hand values from the testing results were used to verify the applicability of the KES-F on warp-knitted fabrics and to analyze the relationships of fabric parameters and hand characteristics. The results indicate that the KES-F is an appropriate tool to measure the hand attributes of warp-knitted samples, and moderate correlations between physical properties and mechanical behavior were found.

Keywords

fabric hand Kawabata Evaluation System for Fabric low-stress mechanical properties primary hand value total hand value warp-knitted fabric

Get full access to this article

View all access options for this article.

References

Dargahi

Najarian

. Human tactile perception as a standard for artificial tactile sensing – a review. Int J Med Robot Comput Assist Surg 2004; 1: 23–35.

Denton

Daniels

. Textile terms and definitions, 11th ed. Manchester: The Textile Institute, 2002.

Peirce

. The handle of cloth as a measurable quantity. J Text Inst Trans 1930; 21: T377–T416.

Howorth

Oliver

. The application of multiple factor analysis to the assessment of fabric handle. J Text Inst Trans 1958; 49: T540–T553.

Bishop

. Fabrics: sensory and mechanical properties. Text Progr 1996; 26: 1–62.

Kawabata

. The standardization and analysis of hand evaluation, Osaka: Textile Machinery Society of Japan, 1980.

Kawabata

Postle

Niwa

. Objective specification of fabric quality, mechanical properties and performance, Osaka: Textile Machinery Society of Japan, 1982.

Kawabata

. Development of a device for measuring heat moisture transfer properties of apparel fabrics. J Text Mach Soc Jpn 1984; 37: 130–141.

Kawabata

Niwa

. Fabric performance in clothing and clothing manufacture. J Text Inst Trans 1989; 80: 19–50.

10.

Yang

Kan

. Effect of heat setting parameters on some properties of PLA knitted fabric. Fibers Polym 2013; 14: 1347–1353.

11.

Yang

Kan

Wong

et al.

Comparative study of cellulase treatment on low stress mechanical properties of cotton denim fabric made by torque-free ring spun yarn. Fibers Polym 2013; 14: 669–675.

12.

Kan

Lam

. Low stress mechanical properties of plasma-treated cotton fabric subjected to zinc oxide-anti-microbial treatment. Materials 2013; 6: 314–333.

13.

Lam

Kan

Yuen

CWM

et al.

Fabric objective measurement of the plasma-treated cotton fabric subjected to wrinkle-resistant finishing with BTCA and TiO₂ system. Fibers Polym 2011; 12: 626–634.

14.

Lam

Kan

Yuen

CWM

et al.

Low stress mechanical properties of plasma-treated cotton fabric subjected to titanium dioxide coating. Text Res J 2011; 81: 1008–1013.

15.

Ellis

Garnsworthy

. A review of techniques for the assessment of hand. Text Res J 1980; 50: 231–238.

16.

Pan

Yen

Zhao

et al.

A new approach to the objective evaluation of fabric handle from mechanical properties Part 1: objective measure for total handle. Text Res J 1988; 58: 438–444.

17.

Miao

. The compression behaviour of warp knitted spacer fabric. Fibres Text East Eur 2008; 16: 90–92.

18.

Ajeli

Jeddi

AAA

Rastgo

et al.

An analysis of the bending rigidity of warp-knitted fabrics: a comparison of experimental results to a mechanical model. J Text Inst 2009; 100: 496–506.

19.

Liu

Zhao

et al.

Compression behavior of warp-knitted spacer fabrics for cushioning applications. Text Res J 2011; 82: 11–20.

20.

Fatemeh

Payam

Mahnaz

et al.

Analysis of compressibility behavior in warp knitted spacer fabrics: experiments and Van Wyk theory. J Eng Fibers Fabrics 2013; 8: 125–130.

21.

Zou

Tuncali

Silverman

. Correlation and simple linear VIII regression. Radiology 2003; 227: 617–628.

22.

Kan

. Relationship between bursting strength and ultraviolet protection property of 100% cotton knitted fabrics. J Text Inst 2015; 106: 978–985.