Sage Journals: Discover world-class research

Abstract

In this paper, the influence of the take-up velocity (V_t_–_u) of fibers on the molecular ordering and ά – α form transition of polylactide (PLA) non-woven fabrics during their manufacturing by spun-bonding is described. Non-woven samples were studied by wide-angle X-ray diffraction, differential scanning calorimetry and Fourier transform infrared spectroscopy. In addition, the physical and mechanical properties of the non-woven fabrics were determined. The results are discussed in terms of the structural changes of the PLA and the meso-phase content during the spun-bonded non-woven fabric forming process. This technological process includes preliminary molecular ordering of the PLA fibers in a downstream spinning block and crystallization on a calender system at a temperature higher than the glass transition. The molecular ordering of the investigated PLA fabric samples under different technological conditions was observed as follows: creation of the meso-phase and a disorder-to-order phase transition (ά to α form) during heating to approximately 110℃ and an increase in the degree of crystallinity for take-up velocities higher than 1400 m/min. The structural changes of the PLA explain the observed changes in the physical and mechanical properties of the non-woven fabrics obtained under different technological conditions.

Keywords

polylactide spun-bonded technology crystallization wide-angle X-ray diffraction Fourier transform infrared spectroscopy differential scanning calorimetry

Get full access to this article

View all access options for this article.

References

Bastioli

. Handbook of biodegradable polymers, Shawbury: Rapra Technology Limited, 2005, pp. 287–294.

Groot

van Krieken

Sliekersl

Production and puriﬁcation of lactic acid and lactide. In: Auras

Lim

L-T

Selke

SEM

(eds). poly(lactic acid) synthesis, structures, properties, processing, and applications, Hoboken, NJ: John Wiley & Sons Inc., 2010, pp. 3–19.

Middleton

Tipton

. Synthetic biodegradable polymers as orthopedic devices. Biomaterials 2000; 21: 2335–2346.

Kale

Auras

Singh

. Degradation of commercial biodegradable packages under real composting and ambient exposure conditions. J Polym Environ 2006; 14: 317–334.

Calabia

Tokiwa

Ugwu

Biodegradation. In: Auras

Lim

L-T

Selke

SEM

(eds). Poly(lactic acid) synthesis, structures, properties, processing, and applications, Hoboken, NJ: John Wiley & Sons Inc., 2010, pp. 423–431.

Mazalevska O, Struszczyk MH and Krucinska I. Design of vascular prostheses by melt electrospinning—structural characterizations. J Appl Polym Sci 2013; 129: 779–792.

Luo Y, Zhang J, Qi R, et al. Polylactide foams prepared by a traditional chemical compression-molding method. J Appl Polym Sci 2013; 130: 330–337.

Liu

Cheng

. Development and filtration performance of polylactic acid meltblowns. Text Res J 2010; 80: 771–779.

Bhat

Gulgunje

Desai

. Development of structure and properties during thermal calendering of polylactic acid (PLA) fiber webs. eX Polym Lett 2008; 2: 49–56.

10.

Perepelkin

. Chemistry and technology of chemical fibres, polylactide fibres: fabrications, properties, use, prospect, a review. Fib Chem 2002; 34: 85–100.

11.

Henton

Gruber

Lunt

Polylactic acid technology. In: Mohanty

Misra

(eds). Natural fibers, biopolymers: Biocomposites, Boca Raton, FL: CPC Press, 2005, pp. 527–577.

12.

Kawai

Rahman

Matsuba

. Crystallization and melting behavior of poly (L-lactic acid). Macromolecules 2007; 40: 9463–9469.

13.

Sawai

Takahashi

Sasashige

. Preparation of oriented â-form poly(l-lactic acid) by solid-state coextrusion: effect of extrusion variables. Macromolecules 2003; 36: 3601–3605.

14.

Cartier

Okihara

Ikada

. Epitaxial crystallization and crystalline polymorphism of polylactides. Polymer 2000; 41: 8909–8919.

15.

Hoogsten

Postema

Pennings

. Crystal structure, conformation and morphology of solution-spun poly(l-lactide) fibers. Macromolecules 1990; 23: 634–642.

16.

Wasanasuk

Tashiro

. Crystal structure and disorder in poly(l-lactic acid) δ form (α′ form) and the phase transition mechanism to the ordered α form. Polymer 2011; 52: 6097–6109.

17.

Pan

Kai

Zhu

. Polymorphous crystallization and multiple melting behavior of poly(l-lactide): molecular weight dependence. Macromolecules 2007; 40: 6898–6905.

18.

Zhang

Tashiro

Tsuji

. Disorder-to-order phase transition and multiple melting behavior of poly(l-lactide) investigated by simultaneous measurements of WAXD and DSC. Macromolecules 2008; 41: 1352–1357.

19.

Pan

Zhu

Kai

. Polymorphic transition in disordered poly(l-lactide) crystals induced by annealing at elevated temperatures. Macromolecules 2008; 41: 4296–4304.

20.

Stoclet

Seguela

Vanmansart

. WAXS study of the structural reorganization of semi-crystalline polylactide under tensile drawing. Polymer 2012; 53: 519–528.

21.

Manich

Miguel

Lucas

. Texturing, stretching and relaxation behaviour of polylactide multifilament yarns. Text Res J 2011; 81: 1788–1795.

22.

Solarski

Ferreira

Devaux

. Characterization of the thermal properties of PLA fibers by modulated differential scanning calorimetry. Polymer 2005; 46: 11187–11192.

23.

Tábi

Sajó

Szabó

. Crystalline structure of annealed polylactic acid and its relation to processing. eX Polym Lett 2010; 4: 659–668.

24.

Courgneau

Domenek

Lebosse

. Effect of crystallization on barrier properties of formulated polylactide. Polym Int 2012; 61: 180–189.

25.

Czekalski

Krucińska

Kowalska

. Effect of twist stabilisation and dyeing on the structural and physical properties of agricultural strings. Fib Text East Euro 2013; 102: 39–44.

26.

Puchalski

Krucińska

Sulak

. Influence of the calender temperature on the crystallization behaviors of PLA spun bonded non-woven fabrics. Text Res J 2013; 83: 1775–1785.

27.

Tsuji

. Poly(lactide) stereocomplexes: formation, structure, properties, degradation, and applications. Macromol Biosci 2005; 5: 569–597.

28.

Rabiej

. Analiza rentgenowskich krzywych dyfrakcyjnych polimerow za pomoca programu komputerowego WAXSFIT, Bielsko-Biała: ATH Press, 2006.

29.

Zhang

Tsuji

Noda

. Weak intermolecular interactions during the melt crystallization of poly(l-lactide) investigated by two-dimensional infrared correlation spectroscopy. J Phys Chem B 2004; 108: 11514–11520.

30.

Brzeziński

Bogusławska

Ilčíková

. Unusual thermal properties of polylactides and polylactide stereocomplexes containing polylactide-functionalized multi-walled carbon nanotubes. Macromolecules 2012; 45: 8714–8721.

31.

Chen H, Shen Y, Yang J, et al. Molecular ordering and a′-form formation of poly(L-lactide) during the hydrolytic degradation. Polymer 2013; 54: 6644–6653.

Effect of processing variables on the thermal and physical properties of poly(L-lactide) spun bond fabrics

Abstract

Keywords

Get full access to this article

References