Sage Journals: Discover world-class research

Abstract

Contact resistance between interlaced conductive yarns will under certain circumstances constitute a problem for sensor applications and electrical routing in interactive textile structures. This type of resistance could alter the effective area of the sensor and introduce hot-spots in the routing.

This paper presents a technique for measuring contact resistances on fabric samples. The samples used are unit cells of plain weave, that is, two conductive (silver-coated) yarns in the warp direction and two in the weft direction. The numerical values for the contact resistance are of the order of R_c ≈ 0.3 Ω. A resistor network made of through-hole film resistors with known values is used for evaluation of the method. The results show that the technique provides values typically within ±1% error compared with the known resistor values. Thus, the method can be used in order to calculate the contact resistances of a woven conductive textile.

Keywords

Testing Fabrication weaving measurement Materials

Get full access to this article

View all access options for this article.

References

Linz T, Kallmayer C, Aschenbrenner R, et al. Fully untegrated EKG shirt based on embroidered electrical interconnections with conductive yarn and miniaturized flexible electronics. In: international workshop on wearable and implantable body sensor networks (BSN 2006), 3–5 April 2006. pp.4–26.

Locher

Klemm

Kirstein

. Design and characterization of purely textile patch antennas. IEEE Trans Adv Packag 2006; 29: 777–788.

Locher

Tröster

. Enabling technologies for electrical circuits on a woven monofilament hybrid fabric. Textil Res J 2008; 78: 583–594.

Mestrovic MA, Helmer RJN, Kyratzis L, et al. Preliminary study of dry knitted fabric electrodes for physiological monitoring. In: 3rd international conference on intelligent sensors, sensor networks and information (ISSNIP 2007), 3–6 December 2007, pp.601–606.

Pola T and Vanhala J. Textile electrodes in ECG measurement. In: 3rd international conference on intelligent sensors, sensor networks and information (ISSNIP 2007), 3–6 December 2007, pp.635–639.

Banaszczyk J, De Mey G, Schwarz A, et al. Current distribution modelling in electroconductive textiles. In: 14th international conference on mixed design of integrated circuits and systems (MIXDES '07), 21–23 June 2007, pp.418–423.

Banaszczyka

Anca

De Mey

. Infrared thermography of electroconductive woven textiles. QIRT J 2009; 6: 163–173.

Banaszczyk J, De Mey G, Anca A, et al. Contact resistance investigation between stainless steel electroconductive yarns. In: 2009 MIXDES-16th international conference mixed design of integrated circuits & systems, 2009, pp.417–419.

Dhawan

Seyam

Ghosh

. Woven fabric-based electrical circuits: Part I: Evaluating interconnect methods. Textil Res J 2004; 74: 913–919.

10.

Mikrajuddin

Shi

Kim

. Size-dependent electrical constriction resistance for contacts of arbitrary size: from Sharvin to Holm limits. Mater Sci Semicond Process 1999; 2: 321–327.

11.

Hatch

. Textile science, West Publishing Company, Minneapolis/Saint Paul, 1993.

12.

Montgomery

. Design and analysis of experiments, Hoboken, NJ: Wiley, 2009.

A novel technique for direct measurements of contact resistance between interlaced conductive yarns in a plain weave

Abstract

Keywords

Get full access to this article

References