Effects of Air Temperature,Relative Humidity,and Wind Speed on Water Vapor Transmission Rate of Fabrics

Abstract

The primary environmental variables which influence the water vapor transmission rate of fabrics include air temperature, relative humidity, and wind speed. The combined quantitative effects of air temperature, relative humidity, and wind speed have been explored. The air temperature varied from 10 °C to 30 °C in 5 °C-intervals. The relative humidity ranged from 0% to 50%. The wind speed was from 0.1 m/s to 0.4 m/s. A new test method was employed to measure the water vapor transmission rate of four typical fabrics exposed under 120 conditions of combinations of relative humidity and wind speed with air temperature. The results showed that high air temperature, low relative humidity, and high wind speed led to high water vapor transmission rate. The exponential equations were obtained from the whole database based on the multiple nonlinear regression analysis, resulting in a generalized quantitative description of various effects on the water vapor permeability of fabrics. The prediction quality was good, as the regression equations provided high correlation coefficients and low standard errors of the estimate. The prediction values from the regression equations agreed well with the experimental results.

Keywords

air temperature fabric relative humidity water vapor transmission rate wind speed

Get full access to this article

View all access options for this article.

References

Huang, J. , Review of Test Methods for Measuring Water Vapor Transfer Properties of Fabrics, Cell. Polym. 26(3), 167- 191 (2007).

Huang, J. , and Qian, X. , Comparison of Test Methods for Measuring Water Vapor Permeability of Fabrics , Textile Res. J. 78(4), 342-352 (2008).

Osczevski, R.J. , Water Vapor Transfer Through a Hydrophilic Film at Subzero Temperatures, Textile Res. J. 66(1), 24-29 (1996).

Furuta, T. , Shimizu, Y. , and Kondo, Y. , Evaluating the Temperature and Humidity Characteristics of a Solar Energy Absorbing and Retaining Fabric, Textile Res. J. 66(3), 123-130 (1996).

Gibson, P.W. , Effect of Temperature on Water Vapor Transport Through Polymer Membrane Laminates, Polym. Test. 19(6), 673-691 (2000).

Pause, B. , Measuring the Water Vapor Permeability of Coated Fabrics and Laminates , J. Coated Fabrics 25, 311-320 (1996).

Gibson, P.W. , Kendrick, C.E. , Rivin, D. , Charmchi, M. , and Sicuranza, L. , An Automated Water Vapour Diffusion Test Method for Fabrics, Laminates, and Films, J. Coated Fabrics 24, 322-345 (1995).

Ruckman, J.E. , Water Vapour Transfer in Waterproof Breathable Fabrics Part 2: Under Windy Conditions, Int. J. Clothing Sci. Technol. 9(1), 23-33 (1997).

Holmes, D. , Performance Characteristics of Waterproof Breathable Fabrics, J. Ind. Textiles 29(4), 306-316 ( 2000).

10.

Gretton, J.C. , Brook, D.B. , Dyson, H.M. , and Harlock, S.C. , A Correlation Between Test Methods Used to Measure Moisture Vapour Transmission Through Fabrics, J. Coated Fabrics 25, 301-311 ( 1996).

11.

GB/T 3820 1997 Standard Test Methods for Thickness of Textiles, National Standards of People’s Republic of China, Beijing , China.

12.

ASTM E96/E96M 2005 Standard Test Methods for Water Vapor Transmission of Materials, In "Annual Book of ASTM Standards 4.06," American Society for Testing and Materials, West Conshohocken, PA, USA.

13.

ISO 11092 1993 Textiles - Physiological Effects - Measurement of Thermal and Water Vapour Resistance Under Steady-state Conditions (Sweating Guarded Hotplate Test) , International Organization for Standardization , Geneva, Switzerland.

14.

Huang, J. , Sweating Guarded Hot Plate Test Method, Polym. Test. 25(5), 709-716 (2006).

15.

Huang, J. , and Qian, X. , A New Test Method for Measuring Water Vapour Permeability of Fabrics, Meas . Sci. Technol. 18(9), 3043-3047 (2007).

16.

Jost, W. , "Diffusion in Solids, Liquids, Gases," Academic Press, New York, USA (1960).

17.

Crank, J. , "The Mathematics of Diffusion," Oxford University Press, London, UK (1975).