A single-end sizing process was developed to eliminate the problems associated with the traditional sizing method. By keeping the yarns separated in slots in the single-end sizing apparatus and drying them individually, less damage to the yarns occurred. In this paper, the process and device developed for single-end sizing are described and the properties of single-end sized yarn are compared with unsized yarn and commercially sized yarn.
Carr, W.W., Ok, H., Brooks, J.D., and Park, H., Apparatus for Single-end Slashing, US Patent 6,814,807 ( 2004 ).
11.
Quéré, D. , Fluid Coating on a Fiber , Annu. Rev. Fluid Mech.31, 347 (1999).
12.
Picciotto, R. , and Hersh, S.P., The Tensile Fatigue Behavior of a Warp Yarn and its Influence on Weaving Performance, Textile Res. J.42(9), 512 (1972).
13.
Frank, F., and Singleton, R.W., A Study of Factors Influencing the Tensile Fatigue Behavior of Yarns , Textile Res. J.34(1), 11 ( 1964).
14.
Walker, R.P. , and Perkins, W.S., Techniques for Predicting How Sized Yarns Will Weave, Textile Chem. Color.17(9), 185 (1985).
15.
Burbage, J., Industrial Microwave Systems (Private Communication).
16.
Nikolic, M. , Cerkvenik, J., and Stjepanovic , Z., Influence of a Spinning Process on Spun Yarn Quality and Economy of Yarn Production , Int. J. Clothing Sci. Technol.6(4), 34 ( 1994).
17.
Lewin, M., and Sello, S.B., “ Handbook of Fiber Science and Technology: Volume I. Chemical Processing of Fibers and Fabrics — Fundamentals and Preparation Part A,” Marcel Dekker, Inc., New York, USA ( 1984).
