Sage Journals: Discover world-class research

Abstract

The selection of an inner fabric layer is an important aspect in the development of a liquid cooling garment (LCG). The desired characteristics of an inner fabric layer in LCGs include good thermal conductivity, moisture management, and tactile properties. Good thermal conductivity can improve cooling efficiency, and good moisture management and tactile properties can make the wearer more comfortable. Eighteen fabrics that differed in fiber content, fabric structure and thickness were investigated in this study for their suitability for use as an inner fabric layer for a LCG. Thermal resistance, evaporative resistance, wicking, and water distribution were measured. Correlation among the three moisture management tests was studied. The effects of metal-containment and fabric thickness on thermal and evaporative resistance were determined. The most suitable fabric among the 18 tested fabrics was selected in this study.

Keywords

liquid cooling garment (LCG)inner fabric layer thermal resistance evaporative resistance moisture management wicking water distribution

Get full access to this article

View all access options for this article.

References

Figura, S. Z. , Cooling Off , Occupational Hazards 59(5), 81-82 (1997).

Muir, I. H. , Bishop, P. A. , and Ray, P. , Effects of a Novel Ice-cooling Technique on Work in Protective Clothing at 28ºC, 23ºC, 18ºC WBGTs . Am. Indust. Hygiene Assoc. J. 60, 96-104 (1999).

Branson, D. H. , Farr, C. A. , Peksoz, S. , Nam, J. , and Cao, H. , Development of a Prototype Personal Cooling System for First Responders: User Feedback . J. ASTM International, 2(2), Paper ID: JAI 12105 (2005).

Nunneley, S. A. , Water Cooled Garments: A Review , Space Life Sci. 2, 335-360 (1970).

Shvartz, E. , Efficiency and Effectiveness of Different Water Cooled Suits A Review , Aerospace Med. 43(5), 488-491 (1972).

Koscheyev, V. S. , Leon, G. R. , Paul, S. , Tranchida, D. , and Linder, I. V. , Augmentation of Blood Circulation to the Fingers by Warming Distal Body Areas . Eur. J. Appl. Physiol. 82, 103-111 (2000).

Koscheyev, V. S. , Leon, G. R. , and Trenino, R. C. , Efficacy of Wrist/Palm Warming as an EVA Countermeasure to Maintain Finger Comfort in Cold Conditions , Aviation, Space, Environ. Med. 72(8), 713-719 (2001).

Young, A. J. , Sawka, M. N. , Epstein, Y. , Decristofano, B. , and Pandolf, K. B. , Cooling Different Body Surfaces During Upper and Lower Body Exercises , J. Appl Physiol 63, 1218-1223 (1987).

Cheuvront, S. N. , Kolka, M. A. , Cadarette, B. S. , Montain, S. J. , and Sawka, M. N. , Efficiency of Intermittent, Regional, Microclimate Cooling . J. Appl. Physiol. 94, 1841-1848 (2003).

10.

Nag, P. K. , Pradhan, C. K. , Nag, A. , Ashtekar, S. P. , and Desai, H , Efficacy of a Water-cooled Garment for Auxiliary Body Cooling in Heat , Ergonomics 41(2), 179-187 (1998).

11.

Xu, X. , Hexamer, M. , and Werner, J. , Multi-loop Control of Liquid Cooling Garment Systems , Ergonomics 42(2), 282-298 (1999).

12.

Cotton Incorporated , 100% Cotton Moisture Management , J. Textile Apparel, Technol. Manage. 2(3), retrieved from http://www.tx.ncsu.edu/jtatm/volume2issue3/articles/cottoninc/cottoninc_fulldocument.pdf (2002).

13.

Post, E. R. , Orth, M. , Russo, P. R. , and Gershenfeld, N. , E-broidery: Design and Fabrication of Textile-based Computing , IBM Systems J. 39( 3&4 ), 840-860 (2000).

14.

Ghali, K. , Jones, B. , and Tracy, J. , Experimental Techniques for Measuring Parameters Describing Wetting and Wicking in Fabrics , Textile Res. J. 64(2), 106-111 (1994).

15.

Kissa, E. , Wetting and Wicking , Textile Res. J. 66(10), 660-668 (1996).

16.

Harnett, P. R. , and Mehta, P. N. , A Survey and Comparison of Laboratory Test Methods for Measuring Wicking , Textile Res. J. 54(7), 471-478 (1984).

17.

Kim, J. O. , and Spivak, S. M. , Dynamic Moisture Vapor Transfer Through Textiles, Part II: Further Techniques for Microclimate Moisture and Temperature Measurement , Textile Res. J. 64(2), 112-121 (1994).

18.

Miller, A. , and Schwartz, P. , A Test Method for Studying Liquid Penetration of Barrier Materials , Textile Res. J. 70(1), 77-83 (2000).

19.

Wang, J.-H. , and Yasuda, H. , Dynamic Water Vapor and Heat Transport Through Layered Fabrics, Part I: Effect of Surface Modification , Textile Res. J. 61(1), 10-20 (1991).

20.

ISO International Standard 11092:1993, Textiles -Physiological Effects -Measurement of Thermal and Water-vapour Resistance under Steady State Conditions (Sweating Guarded-hotplate Test), International Organization for Standardization, Geneva, Switzerland .

21.

ASTM Standard Test Method F1868-98, Standard Test Method for Thermal and Evaporative Resistance of Clothing materials Using a Sweating Hot Plate, 2000 Annual Book of ASTM Standards, 11.03, 1286-1293, American Society for Testing and Materials, Philadelphia, PA (2000).

Fabric Selection for a Liquid Cooling Garment

Abstract

Keywords

Get full access to this article

References