Effects of Moisture on the Thermal Protective Performance of Firefighter Protective Clothing in Low-level Radiant Heat Exposures

Abstract

This paper describes research on the effects of absorbed moisture on the thermal protective performance of the fire fighter turnout materials exposed to thermal assaults lower than flashover conditions. A thermal testing platform and sensor are used to measure thermal protective performance of turnout systems exposed to a sub flashover heat flux range 6.3 kw/m2 (0.15 cal/ cm2 s). The effects of moisture level on predicted second-degree burn injury for turnout systems having different moisture vapor permeability and total heat loss are discussed. Heat transfer analysis and experimental results show that, for selected test conditions, moisture negatively impacts protective performance most severely when the amount of added moisture is at a comparatively low level (15–20% of turnout system weight).

Keywords

thermal protective performance heat in textiles moisture in textiles thermal test methods stored thermal energy

Get full access to this article

View all access options for this article.

References

Barker, R. L. , Guerth, C. , Behnke, W. P. , and Bender, M. , Measuring the Thermal Energy Stored in Firefighter Protective Clothing, in “Performance of Protective Clothing: Issues and Priorities for the 21st Century: Seventh Volume ASTM STP 1386,” C. N. Nelson and N. W. Henry , Eds., American Society for Testing and Materials, West Conshohocken, PA , 2000.

Barker, R. L. and Guerth-Schacher, C. , Moisture Absorption in Advanced Heat Resistant Protective Clothing Systems , in “Proceedings of the 2nd Autex World Textile Conference,” Bruges, Belgium, July 1–3, 2002.

Barker, R. L. , Myhre, L. G. , Scruggs, B. J. , Shalev, I. , Prahsarn, C. , and Miszko, T. , Effect of Measured Heat Loss Through Turnout Materials of Firefighter Comfort and Heat Stress. Part I: Performance, in “Seventh Volume ASTM STP 1386,” C. N. Nelson and N. W. Henry , Eds., American Society for Testing and Materials, West Conshohocken, PA , 2000.

Bejan, A. , “Heat Transfer”, pp. 148–151, 1993.

Grimes, Mulligan, J. C , Hamouda, H. , and Barker, R. The Design of a Surface Heat Flux Transducer for Use in Fabric Thermal Protection Testing, in “Performance of Protective Clothing: Fifth Volume, ASTM STP 1237,” J. S. Johnson and S. Z. Mansdorf , Eds., American Society for Testing and Materials. West Conshohocken, PA , 1996.

Henriques, F. C., Jr. and Moritz, A. R. , Studies of Thermal Injuries: The Relative Importance of Time and Surface Temperature in the Causation of Cutaneous Burns , Am. J. Pathol. 23, 695–720 (1947).

Myhre, L. G. , Barker, R. L. , Scruggs, B. J. , Shalev, I. , Prahsarn, C. , and Miszko, T. , Effect of Measured Heat Loss Through Turnout Materials of Firefighter Comfort and Heat Stress. Part II: Performance in a Warm Environment, in “Performance of Protective Clothing: Issues and Priorities for the 21st Century: Seventh Volume ASTM STP 1386,” C. N. Nelson and N. W. Henry , Eds., American Society for Testing and Materials, West Conshohocken, PA , 2000.

Stull, J. O. , and Duffy, R. M. , Field Evaluation of Protective Clothing Effects on Fire Fighter Physiology: Predictive Capability of Total Heat Loss Test, in “Performance of Protective Clothing: Issues and Priorities for the 21st Century: Seventh Volume ASTM STP 1386,” C. N. Nelson and N. W. Henry , Eds., American Society for Testing and Materials, West Conshohocken, PA , 2000.