Computational fluid dynamics simulation of blood flow profile and shear stresses in bileaflet mechanical heart valve by using monolithic approach

Abstract

Bileaflet mechanical heart valves (BMHVs) are widely used to replace diseased heart valves. However, patients may suffer from implant complications, such as platelet aggregation and damage to blood cells, which could lead to BMHV failure. These complications are related to the blood flow patterns in the BMHV. A three-dimensional computational fluid dynamic (CFD) model was developed to investigate blood hydrodynamics and shear stresses at different cardiac cycles. A user-defined function (UDF) code was developed to model the valve leaflet motion. This UDF updates the tetrahedral mesh according to the location of the valve leaflet, which enables modeling of complicated moving geometries and achieves solution convergence with ease without the need to adjust the relaxation factor values. The agreement between the experimental and numerical results indicates that the developed model could be used with confidence to simulate BMHV motion and blood flow. Furthermore, valve leaflet and valve pivot were found to be continuously exposed to shear stresses higher than 52.3 Pa which according to previous research findings may cause damage to blood platelets.

Keywords

Bileaflet mechanical heart valve computational fluid dynamics blood flow shear stresses damage to blood cells

Get full access to this article

View all access options for this article.

References

Fortini

Espa

Toninato

. Analyses of the flow field downstream a bileaflet valve inside an aortic arch laboratory model. 16th International Symposium on Applications of Laser Techniques to Fluid Mechanics, 9–12 July 2012, Lisbon, Portugal.

Al-Azawy

Turan

Revell

. Investigating the use of turbulence models for flow investigations in a positive displacement ventricular assist device. 6th European Conference of the International Federation for Medical and Biological Engineering, 7–11 September 2014, Dubrovnik, Croatia. Springer International Publishing, 2015. pp. 395–398.

Dasi

Simon

. Vorticity dynamics of a bileaﬂet mechanical heart valve in an axisymmetric aorta. Phys Fluids 2007; 19: 067105.

Nguyen

Kuan

Chen

. Experimentally validated hemodynamics simulations of mechanical heart valves in three dimensions. Cardiovasc Eng Technol 2012; 3: 88–100.

Choi

Kim

Kwon

. Pulsatile blood flows through a bileaflet mechanical heart valve with different approach methods of numerical analysis; pulsatile flows with fixed leaflets and interacted with moving leaflets. J Mech Sci Technol 2003; 17: 1073–1082.

Hong

Choi

Kim

. Characteristics of hemodynamics in a bileaflet mechanical heart valve using an implicit FSI method. World Acad Sci Eng Technol 2009; 49: 679–684.

Hong

Kim

. A numerical analysis of the blood flow around the bileaflet mechanical heart valves with different rotational implantation angles. J Hydrodyn 2011; 23: 607–614.

Gkanis

Housiadas

. A time-dependent numerical analysis of flow in a mechanical heart valve: Comparison with experimental results. Int J Comput Fluid D 2010; 24: 157–168.

Annerel

Claessens

Degroote

. Validation of a numerical FSI simulation of an aortic BMHV by in vitro PIV experiments. Med Eng Phys 2014; 36: 1014–1023.

10.

Zhou

Cui

. Analysis of flow field in mechanical aortic bileaflet heart valves using finite volume method. J Med Biol Eng 2016; 36: 110–120.

11.

Nobili

Morbiducci

Ponzini

. Numerical simulation of the dynamics of a bileaflet prosthetic heart valve using a fluid–structure interaction approach. J Biomech 2008; 41: 2539–2550.

12.

De Tullio

Pedrizzetti

Verzicco

. On the effect of aortic root geometry on the coronary entry-flow after a bileaflet mechanical heart valve implant: a numerical study. Acta Mechanica 2011; 216: 147–163.

13.

Yeh

. Computational analysis of fluid structure interaction in artificial heart valves. PhD Thesis. University of British Columbia, 2013.

14.

Yun

McElhinney

Arjunon

. Computational simulations of flow dynamics and blood damage through a bileaflet mechanical heart valve scaled to pediatric size and flow. J Biomech 2014; 47: 3169–3177.

15.

Kabinejadian

Phang

. Numerical modeling of intraventricular flow during diastole after implantation of BMHV. PLOS One 2015; 10: 1–16.

16.

Morsi

Yang

Wong

. Transient fluid–structure coupling for simulation of a trileaflet heart valve using weak coupling. J Artif Organs 2007; 10: 96–103.

17.

Forsythe

Mueller

. Validation of a fluid structure interaction model for a bileaflet mechanical heart valve. Int J Comput Fluid D 2008; 22: 541–553.

18.

Sotiropoulos

Borazjani

. A review of state-of-the-art numerical methods for simulating flow through mechanical heart valves. Med Biol Eng Comput 2009; 47: 245–256.

19.

Stewart

Paterson

Burgreen

. Assessment of CFD performance in simulations of an idealized medical device: results of FDA’s first computational interlaboratory study. Cardiovasc Eng Technol 2012; 3: 139–160.

20.

Cefalu

Roemer

Kosakowski

. Incorporating 3D RP Process in Biomedical Engineering Design. Proceedings of the 2011 Midwest Section Conference of the American Society for Engineering Education, 28–30 September 2011, Arkansas, USA, pp. 1–12.

21.

Image retrieved from the Website of ViVitro Lab Inc., http://vivitrolabs.com/ (2013, accessed 14 March 2013).

22.

Lai

Liu

. A reevaluation and discussion on the threshold limit for hemolysis in a turbulent shear flow. J Biomech 2001; 34: 1361–1364.

23.

Yoganathan

Woo

Sung

. Turbulent shear stress measurements in the vicinity of aortic heart valve prostheses. J Biomech 1986; 19: 433–442.

24.

Hellums

Peterson

Stathopoulos

. Studies on the mechanisms of shear-induced platelet activation. In: Hartmann

Kuschinsky

(eds) Proceeding of the International Symposium Cerebral Ischemia and Hemorheology, June 1987, Germany. Heidelberg: Springer-Verlag Berlin, 1987. pp. 80–89.