Isothermal Anneal Effect on Leucite Content in Dental Porcelains

Abstract

Porcelain thermal expansion behavior is a function of leucite content, and leucite changes can produce porcelain-metal incompatibilities. The purpose of the present study was to determine whether isothermal anneal treatments (such as are encountered during "post-soldering" operations) could result in alterations of leucite content of dental porcelain. Six commercial dental porcelains and the "Component No. 1" frit of the Weinstein et al. patent (1962) were studied. Twenty-eight coupon specimens of each porcelain were fired and divided randomly into seven groups of four specimens each. One group served as a control, while the other six groups were subjected to isothermal anneal treatments-three groups at 500°C and three groups at 750°C, for 4, 8, and 16 min, respectively. Leucite volume fraction was measured via quantitative x-ray diffraction. From an equation for the growth of particles in competition for diffusing material, an expression was derived for the potential simultaneous processes of leucite crystallization and reaction of leucite + glass to form sanidine or other compounds. This exponential growth/decay curve was fit through the experimental data for each porcelain by minimization of the sum of the squares of the residuals through iteration. For each porcelain, a statistically significant correlation was obtained between leucite volume fraction and isothermal anneal duration at 750°C (p < 0.01), whereas at 500°C, only CII exhibited a statistically significant correlation (p < 0.01). The control (non-annealed) leucite volume fractions for the commercial porcelains ranged from (mean ± SD) 0.155 ± 0.002 for WIL to 0.442 ± 0.003 for Component No. 1. The 750°C isothermal anneal increased the leucite volume fraction by between 6.1% and 21.3%. These increases in leucite could be responsible for the porcelain fracture that sometimes occurs during post-soldering.

Keywords

ceramics dental porcelain leucite x-ray diffraction

Get full access to this article

View all access options for this article.

References

Anusavice KJ , DeHoff PH , Gray A. , Lee PS (1988). Delayed crack development in porcelain due to incompatibility stress. J Dent Res 67:1086-1091.

Anusavice KJ , Gray A. ( 1989). Influence of framework design, contraction mismatch, and thermal history on porcelain checking in fixed partial dentures. Dent Mater 5:58-63. Fairhurst CW , Anusavice KJ , Hashinger DT , Ringle RD , Twiggs SW (1980). Thermal expansion of dental alloys and porcelains. J Biomed Mater Res 14:435-446.

Fairhurst CW , Hashinger DT , Twiggs SW (1981). Glass transition temperatures of dental porcelain . J Dent Res 60:995-998.

Doremus RH (1973). Glass science. New York: John Wiley & Sons, Inc., p. 65.

Dorsch P. (1981). Stresses in metal-ceramic systems as a function of thermal history. Ceramic Forum Int/Ber Dt Keram Ges 58:1-7. Dorsch P. (1982). Thermal compatibility of materials for

Kingery WD , Bowen HK , Uhlmann DR (1976). Introduction to ceramics. 2nd ed. New York: John Wiley & Sons, pp. 311-317.

Mackert JR Jr , Butts MB , Fairhurst CW (1986). The effect of the leucite transformation on dental porcelain expansion. Dent Mater 2:32-36.

Mackert JR Jr , Evans AL (1991a). Effect of cooling rate on leucite volume fraction in dental porcelains. J Dent Res 70:137-139. Mackert JR Jr , Evans AL (1991b). Quantitative x-ray diffraction determination of leucite thermal instability in dental porcelain. J Am Ceram Soc 74:450-453.

Mackert JR Jr , Evans AL (1992). Multiple firing effect on leucite content of dental porcelains and correlation with thermal expansion (abstract). J Dent Res 71:238.

10.

Prasad A. , Day GP , Tobey RG (1988). A new dimension for evaluation of porcelain-alloy compatibility. In: Perspectives in dental ceramics. Proceedings of the 4th International Symposium on Ceramics. Preston JD, editor. Chicago: Quintessence Publ. Co., Inc., pp. 65-74.

11.

Schairer JF , Bowen NL (1955). The system K2O-Al2O3-SiO2. Am J Sci 253:681-746.

12.

Weinstein M. , Katz S. , Weinstein AB , inventors (1962). Permadent Manufacturing Corporation, assignee. Fused porcelain-to-metal teeth. US Patent 3,052,982. Sept. 11. Yamamoto M. (1985). Metal-ceramics. Chicago: Quintessence Publishing Co., pp. 156-202.