In comparison to enamel, bonding to normal dentin is a greater challenge because of its organic constituents, fluid-filled tubules, and variations in intrinsic composition. Bonding to sclerotic dentin is even more difficult. To evaluate the shear bond strengths of four adhesive systems to dentin substrates with different levels of mineralization, 120 extracted human teeth were randomly assigned to three groups (n = 40). After mid-coronal dentin was exposed, groups of specimens were artificially hypermineralized by immersion in a remineralizing solution, demineralized by means of an acetic acid demineralizing solution, or stored in distilled water to model sclerotic, carious, and normal dentin, respectively. Resin composite was bonded to dentin by use of commercial adhesive systems. After the specimens were thermocycled, shear bond strengths were determined in an Instron universal testing machine. Dentin substrates and resin/dentin interfaces were examined by SEM. For each adhesive system, the mean shear bond strength to normal dentin was significantly higher than that to either of the other substrates. Shear bond strengths to hypermineralized dentin were significantly higher than those to demineralized dentin with all adhesives except Prisma Universal Bond 3.
Asmussen E., Uno S. (1992). Adhesion of restorative resins to dentin: chemical and physicochemical aspects. Oper Dent (Suppl 5):68-74.
4.
Barkmeier WW, Huang C-T.Hammesf ahr PD, Jef f eries SR (1990). Bond strength, microleakage, and scanning electron microscopy examination of the Prisma Universal Bond 2 adhesive system. J Esthet Dent2:134-139.
5.
Barkmeier WW, Suh BI, Cooley RL (1991a). Shear bond strength to dentin and Ni-Cr-Be alloy with the All-Bond universal adhesive system. J Esthet Dent3:148-153.
6.
Barkmeier WW, Cooley RL, Douville CJ (1991b). Adhesive resin bond strength to dentin and Ni-Cr-Be alloy (abstract). J Dent Res70:526.
Barkmeier WW, Jefferies SR (1992). Dentin adhesion using acid conditioners with Prisma Universal Bond 2 (abstract). J Dent Res71:170.
9.
Bowen RL (1985). Bonding of restorative materials todentin: the present status in the United States. Int Dent J35:155-159.
10.
Bowen RL, Cobb EN, Rapson JE (1982). Adhesive bonding of various materials to hard tooth tissues: improvement in bond strength to dentin. J Dent Res61:1070-1076.
11.
Bowen RL, Marjenhoff WA (1991). Development of an adhesive system for bonding to hard tooth tissues. J Esthet Dent3:86-90.
12.
Brännström M., Johnson G., Nordenvall K-J (1979). Transmission and control of dentinal pain: resin impregnation for the desensitization of dentin. J Am Dent Assoc99:612-618.
13.
Brown WS, Jacobs HR, Thompson RE (1972). Thermal fatigue in teeth. J Dent Res51:461-467.
14.
Buonocore MG (1955). A simple method of increasing the adhesion of acrylic filling materials to enamel surfaces. J Dent Res34:849-853.
15.
Buonocore M., Wileman W., Brudevold F. (1956). A report on a resin composition capable of bonding to human dentin surfaces. J Dent Res35:846-851.
16.
Chappell R., Eick J., Morgan R. (1992). Shear bond strength and SEM observation of the newest dentin adhesives (abstract). J Dent Res71:170.
17.
Chiba M., Itoh K., Wakumoto S. (1989). Effect of dentin cleansers on the bonding efficacy of dentin adhesive. Dent Mater J8:76-85.
18.
Duke ES ( 1992). Clinical studies of adhesive systems. Oper Dent (Suppl 5):103-110.
19.
Duke ES, LindemuthJ. (1990). Polymeric adhesion to dentin: contrasting substrates . Am J Dent3:264-270.
20.
Duke ES, LindemuthJ. (1991). Variability of clinical dentin substrates. Am J Dent4:241-246.
21.
Eliades GC, Caputo AA, Vougiouklakis GJ (1985). Composition, wetting properties and bond strength with dentin of six new dentin adhesives. Dent Mater1:170-176.
22.
Erickson RL (1989). Mechanism and clinical implications of bond formation for two dentin bonding agents. Am J Dent2:117-123.
Feilzer AJ, de Gee AJ, Davidson CL (1990). Relaxation of polymerization contraction shear stresses by hygroscopic expansion. J Dent Res69:36-39.
25.
Fowler CS, Swartz ML, Moore BK, Rhodes BF (1992). Influence of selected variables on adhesion testing . Dent Mater8:265-269.
26.
Fukushima T., Horibe T. (1990). A scanning electron microscope investigation of bonding of methacryloyloxyalkyl hydrogen maleate to etched dentin. J Dent Res69:46-50.
27.
Gwinnett AJ (1992). Moist versus dry dentin: Its effect on shear bond strength. Am J Dent5:127-129.
28.
Gwinnett AJ, Matsui A. (1967). A study of enamel adhesives. The physical relationship between enamel and adhesive. Arch Oral Biol12:1615-1620.
29.
Gwinnett AJ, Jendresen MD (1978). Micromorphologic features of cervical erosion after acid conditioning and its relation with composite resins. J Dent Res57:543-549.
30.
Gwinnett AJ, Kanca (1992). Micromorphology of the bonded dentin interface and its relationship to bond strength. Am J Dent5:73-77.
31.
Heilman JR, Wefel JS (1989). Effect of remineralization on demineralized root surf aces (abstract). J Dent Res68:351.
32.
Heymann HO, Sturdevant JR, Bayne S., Wilder AD, Sluder TB, Brunson WD (1991). Examining tooth flexure effects on cervical restorations : a two-year clinical study. J Am Dent Assoc122:41-47.
33.
Hotta K., Mogi M., Miura F., Nakabayashi N. (1992). Effect of 4-MET on bond strength and penetration of monomers into enamel. Dent Mater8:173-175.
34.
Imai Y., Kadoma Y., Kojima K., Akimoto T., Ikakura K., Ohta T. ( 1991). Importance of polymerization initiator systems and interfacial initiation of polymerization in adhesive bonding of resin to dentin. J Dent Res70:1088-1091.
35.
Johnson GH, Powell LV, Gordon GE (1991). Dentin bonding systems: a review of current products and techniques. J Am Dent Assoc122:34-41.
36.
Johnston AD, Bowen RL (1991). Protective coatings for tooth crowns. J Am Dent Assoc122:49-51.
37.
Kanca J. (1992a). Resin bonding to wet substrate. 1. Bonding to dentin. Quint Int23:39-41.
38.
Kanca J. (1992b). Effect of resin primer solvents and surf ace wetness on resin composite bond strength to dentin. Am J Dent5:213-215.
McGuckin RS, Tao L., Thompson WO, Pashley DH (1991). Shear bond strength of Scotchbond in vivo. Dent Mater7:50-53.
45.
Mendis Brrn, Darling AI (1979). A scanning electron microscope and microradiographic study of closure of human coronal dentin tubules related to occlusal attrition and caries. Arch Oral Biol24:725-733.
46.
Misra DN (1989). Adsorption of 4-methacryloxyethyl trimellitate anhydride (4-META) on hydroxyapatite and its role in composite bonding. J Dent Res68:42-47.
47.
Mitra SB (1991). Adhesion to dentin and physical properties of a light-cured glass-ionomer liner/base. J Dent Res70:72-74.
48.
Munksgaard EC, Asmussen E. (1985). Dentin-polymer bond mediated by glutaraldehyde/HEMA . Scand J Dent Res93:463-466.
49.
Nakabayashi N., Kojima K., Masuhara E. (1982). The promotion of adhesion by the infiltration of monomers into tooth substrates. J Biomed Mater Res16:265-273.
50.
Nakabayashi N. (1985a). Bonding of restorative materials todentine: the present status in Japan. Int DentJ35:145-154.
51.
Nakabayashi N. (1985b). Biocompatibility and promotion of adhesion to tooth substrates. CRC Crit Rev Biocompatibil1:25-52.
52.
Nakabayashi N. (1992). Adhesive bonding with 4-META. Oper Dent (Suppl 5) :125-130.
53.
Nakabayashi N., Takarada K. (1992). Effect of HEMA on bonding to dentin. Dent Mater8:125-130.
54.
Nakabayashi N., Watanabe A., Gendusa NJ (1992). Dentin adhesion of "modified" 4-META/MMA-TBB resin: function of HEMA. Dent Mater8:259-264.
55.
Ozaki M., Suzuki M., Itoh K., Wakumoto S. (1991). Laser-Raman spectroscopic study of the adhesive interface between 4-MET/MMA-TBB resin and hydroxyapatite or bovine enamel . Dent Mater J10:105-120.
56.
Pashley DH (1989). Dentin: a dynamic substrate-a review. Scanning Microsc3:161-176.
57.
Pashley DH (1991). Dentin bonding: overview of the substrate with respect to adhesive material. J Esthet Dent3:46-50.
58.
Pashley DH (1992). The effects of acid-etching on the pulpodentin complex. Oper Dent17:229-242.
59.
Pashley DH, Livingstone MJ, Greenhill JD (1978). Regional resistances to fluid flow in human dentine in vitro. Arch Oral Biol23:807-810.
60.
Pashley DH, Kepler EE, Williams EC, O'Meara JA (1984). The effect on dentine permeability of time following cavity preparations in dogs. Arch Oral Biol29:65-68.
61.
Pashley DH, Andringa HJ, Derkson GD, Derkson ME, Kalathoor S. (1987). Regional variability in the permeability of human dentine. Arch Oral Biol32:519-523.
62.
Pashley DH, Horner JA, Brewer PD (1992). Interactions of conditioners on the dentin surface . Oper Dent (Suppl 5):137-150.
63.
Prati C., Montanari G., Biagini G., Fava F., Pashley DH (1992). Effects of dentin surface treatments on the shear bond strength of Vitrabond. Dent Mater8:21-26.
64.
Richards FM, Knowles JR (1968). Glutaraldehyde as a protein crosslinking reagent . J Molec Biol37:231-233.
65.
Ruse ND, Smith DC (1991). Adhesion to bovine dentin-surface characterization . J Dent Res70:1002-1008.
66.
Schumacher GE, Eichmiller FC, AntonucciJM (1992). Effects of surface-active resins on dentin/composite bonds. Dent Mater8 :278-282.
67.
Sidhu SK, Soh G., Henderson LJ (1991). Effect of dentin age on effectiveness of bonding agents. Oper Dent16:218-222.
68.
Smith DC (1992). Polyacrylic acid-based cements: adhesion to enamel and dentin. Oper Dent (Suppl 5) :177-183.
69.
Soderholm K-JM (1991). Correlation of in vivo and in vitro performance of adhesive restorative materials: a report of the ASC MD156 Task Group on test methods for the adhesion of restorative materials. Dent Mater7:74-83.
70.
Spencer P., Byerley TJ, Eick JD, Witt JD ( 1992). Chemical characterization of the dentin/adhesive interface by Fourier Transform Infrared Photoacoustic Spectroscopy. Dent Mater8:10-15.
71.
Suh BI (1991). All-Bond-fourth generation dentin bonding system . J Esthet Dent3:139-147.
72.
Suzuki M., Gwinnett AJ (1991). Relationship of bonded resin composite restorations to dentin (abstract). J Dent Res70:525.
73.
Swif EJ, Triolo PT (1992). Bond strengths of Scotchbond Multi-Purpose to moist dentin and enamel. Am J Dent5:318-320.
74.
Takuma S. (1960). Electron microscopy of the structure around the dentinal tubule. J Dent Res39:973-981.
75.
Tao L., TagamiJ,Pashley DH (1991). Pulpal pressures and bond strengths of Superbond and Gluma. Am J Dent4:73-76.
76.
Ten Cate AR (1989). Oral histology: development, structure and function . 3rd ed. St. Louis, MO: The C.V. Mosby Company, pp. 157-196.
77.
Thompson VP, Edler TL, DavisG. ( 1989). XPS characterization of dentin and dentin treated with bonding primers (abstract). J Dent Res68:958.
78.
Torney DL (1978). The retentive ability of acid-etched dentin. J Prosthet Dent39:169-172.
79.
Triolo PT, Swift EJ (1992). Shear bond strength of ten dentin adhesive systems . Dent Mater8:370-374.
80.
Van Meerbeek B., Inokoshi S., Braem M., Lambrechts P., Vanherle G. (1992). Morphological aspects of the resin-dentin interdif fusion zone with different dentin adhesive systems. J Dent Res71:1530-1540.
81.
Van Meerbeek B., Dhem A., Goret-Nicaise M., Braem M., Lambrechts P., Vanherle G. (1993). Comparative SEM and TEM examination of the ultrastructure of the resin-dentin interdiffusion zone. J Dent Res72:495-501.
82.
Van Strijp AJP, Klont B., Ten Cate JM (1992). Solubilization of dentin matrix collagen in situ . J Dent Res71:1498-1502.
83.
Wang T., Nakabayashi N. (1991). Effect of 2-(methacryloxy)ethyl phenyl hydrogen phosphate on adhesion to dentin. J Dent Res70:59-66.
84.
Yoshiyama M., Mosada J., Uchida A., Ishida H. (1989). Scanning electron microscopic characterization of sensitive vs. insensitive human radicular dentin. J Dent Res68:1498-1502.
