This study tested the hypothesis that all-ceramic core-veneer system crown reliability is improved by modification of the core design. We modeled a tooth preparation by reducing the height of proximal walls by 1.5 mm and the occlusal surface by 2.0 mm. The CAD-based tooth preparation was replicated and positioned in a dental articulator for core and veneer fabrication. Standard (0.5 mm uniform thickness) and modified (2.5 mm height lingual and proximal cervical areas) core designs were produced, followed by the application of veneer porcelain for a total thickness of 1.5 mm. The crowns were cemented to 30-day-aged composite dies and were either single-load-to-failure or step-stress-accelerated fatigue-tested. Use of level probability plots showed significantly higher reliability for the modified core design group. The fatigue fracture modes were veneer chipping not exposing the core for the standard group, and exposing the veneer core interface for the modified group.
BhowmickSMelendez-MartinezJJHermannIZhangYLawnBR (2007). Role of indenter material and size in veneer failure of brittle layer structures. J Biomed Mater Res B Appl Biomater82:253-259.
4.
BonfanteEASilvaNRCoelhoPGBayardo-GonzalezDEThompsonVPBonfanteG (2009). Effect of framework design on crown failure. Eur J Oral Sci117:194-199.
5.
ChevalierJGremillardL (2009). Ceramics for medical applications: a picture for the next 20 years. J Eur Ceram Soc29:1245-1255.
CoelhoPGSilvaNRBonfanteEAGuessPCRekowEDThompsonVP (2009b). Fatigue testing of two porcelain-zirconia all-ceramic crown systems. Dent Mater25:1122-1127.
8.
Della BonaAKellyJR (2008). The clinical success of all-ceramic restorations. J Am Dent Assoc139(Suppl):8S-13S.
9.
DeLongRDouglasWH (1983). Development of an artificial oral environment for the testing of dental restoratives: bi-axial force and movement control. J Dent Res62:32-36.
10.
DengYLawnBRLloydIK (2002). Characterization of damage modes in dental ceramic bilayer structures. J Biomed Mater Res63:137-145.
GuessPCStrubJRSteinhartNWolkewitzMStappertCF (2009). All-ceramic partial coverage restorations—Midterm results of a 5-year prospective clinical splitmouth study. J Dent37:627-637.
13.
HuangMThompsonVPRekowEDSoboyejoWO (2007). Modeling of water absorption induced cracks in resin-based composite supported ceramic layer structures. J Biomed Mater Res84:124-130.
14.
KellyJR (1999). Clinically relevant approach to failure testing of all-ceramic restorations. J Prosthet Dent81:652-661.
15.
KimBZhangYPinesMThompsonVP (2007). Fracture of porcelain-veneered structures in fatigue. J Dent Res86:142-146.
16.
KimJHKimJWMyoungSWPinesMZhangY (2008). Damage maps for layered ceramics under simulated mastication. J Dent Res87:671-675.
KimJWKimJHJanalMNZhangY (2008). Damage maps of veneered zirconia under simulated mastication. J Dent Res87:1127-1132.
19.
KohalRJKlausG (2004). A zirconia implant-crown system: a case report. Int J Periodontics Restorative Dent24:147-153.
20.
KohalRJKlausGStrubJR (2006). Zirconia-implant-supported all-ceramic crowns withstand long-term load: a pilot investigation. Clin Oral Implants Res17:565-571.
21.
LarssonCVult von SteyernPSunzelBNilnerK (2006). All-ceramic two- to five-unit implant-supported reconstructions. A randomized, prospective clinical trial. Swed Dent J30:45-53.
22.
ManiconePFRossi IommettiPRaffaelliL (2007). An overview of zirconia ceramics: basic properties and clinical applications. J Dent35:819-826.
23.
MarchackBWFutatsukiYMarchackCBWhiteSN (2008). Customization of milled zirconia copings for all-ceramic crowns: a clinical report. J Prosthet Dent99:169-173.
24.
MarkerJCGoodkindRJGerberichWW (1986). The compressive strength of nonprecious versus precious ceramometal restorations with various frame designs. J Prosthet Dent55:560-567.
25.
McLarenEAWhiteSN (1999). Glass-infiltrated zirconia/alumina-based ceramic for crowns and fixed partial dentures. Pract Periodontics Aesthet Dent11:985-994.
26.
MolinMKKarlssonSL (2008). Five-year clinical prospective evaluation of zirconia-based Denzir 3-unit FPDs. Int J Prosthodont21:223-227.
27.
NelsonW (1990). Accelerated testing: statistical models, test plans, and data analysis. New York: John Wiley & Sons, Chapter 10, pp. 493-520.
28.
OkesonJP (1998). Alignment and occlusion of the dentition. In: Management of temporomandibular disorders and occlusion. St. Louis, MO: CV Mosby, pp. 67-92.
29.
PanekHMatthews-BrzozowskaTNowakowskaDPanekBBielickiGMakacewiczS. (2008). Dynamic occlusions in natural permanent dentition. Quintessence Int39:337-342.
30.
QuinnG (2007). Fractography of ceramics and glasses. A NIST recommended practice guide; Special Publication 960-16. Washington, DC: National Institute of Standards and Technology; May2007http://www.ceramics.nist.gov/pubs/practice.htm (URL accessed 6/16/10).
31.
RaigrodskiAJChicheGJPotiketNHochstedlerJLMohamedSEBilliotS. (2006). The efficacy of posterior three-unit zirconium-oxide-based ceramic fixed partial dental prostheses: a prospective clinical pilot study. J Prosthet Dent96:237-244.
32.
RekowDThompsonVP (2007). Engineering long term clinical success of advanced ceramic prostheses. J Mater Sci Mater Med18:47-56.
33.
RekowDZhangYThompsonV (2007). Can material properties predict survival of all-ceramic posterior crowns?Compend Contin Educ Dent28:362-368.
34.
SailerIFeherAFilserFGaucklerLJLuthyHHammerleCH (2007a). Five-year clinical results of zirconia frameworks for posterior fixed partial dentures. Int J Prosthodont20:383-388.
35.
SailerIPjeturssonBEZwahlenMHammerleCH (2007b). A systematic review of the survival and complication rates of all-ceramic and metal-ceramic reconstructions after an observation period of at least 3 years. Part II: Fixed dental prostheses. Clin Oral Implants Res18(Suppl 3):86-96. Erratum in Clin Oral Implants Res 19:326-328, 2008.
36.
ScherrerSSQuinnGDQuinnJB (2008). Fractographic failure analysis of a Procera AllCeram crown using stereo and scanning electron microscopy. Dent Mater24:1107-1113.
37.
ShelbyDS (1962). Practical considerations and design of the porcelain fused to metal. J Prosthet Dent12:542-548.
38.
SilvaNRFASailerIZhangYCoelhoPGGuessPCZembicA. (2010). Performance of Zirconia for Dental Healthcare. Materials3:863-896.
39.
SwainMV (2009). Unstable cracking (chipping) of veneering porcelain on all-ceramic dental crowns and fixed partial dentures. Acta Biomater5:1668-1677.
40.
TinschertJSchulzeKANattGLatzkePHeussenNSpiekermannH (2008). Clinical behavior of zirconia-based fixed partial dentures made of DC-Zirkon: 3-year results. Int J Prosthodont21:217-222.
41.
ZhaoWElsayedE (2005). A general accelerated life model for step-stress testing. IEEE Trans Reliability37:1059-1069.
