The out-of-plane shear response of thick, unidirectional and crossply, AS4/3501-6 and S2 glass/3501-6 laminates was investigated theoretically and experimentally using V-notched beam (Iosipescu) specimens. Strains were monitored in the specimen test sections using conventional strain gages, moiré interferometry and full section strain gages. Crossply laminates exhibited a fairly uniform strain distribution away from the notches, while the unidirectional specimens were characterized by a nonuniform distribution. Measured strains correlated very well with predicted strains from specimen finite element analyses using nonlinear elastic material properties.
WilkinsD. J.1982.Workshop on Failure Analysis and Mechanisms of Failure of Fibrous Composites, NASA Langley Research Center
2.
3.
PaulP. CSaffC. R.SangerK. B.MahlerM. A.KanH. P.KautzE. F.. 1989.“Out of Plane Analysis for Composite Structures,” Eighth DOD/NASA/FAA Conference on Fibrous Composites in Structural Design, Norfolk, Virginia
4.
SerabianS. M.1991.“The Effects of Nonlinear Intralaminar Shear Behavior on the Modeling Accuracy of [(0/90)3,0], and [(±45)]3, Pin-Loaded Laminates,”Journal of Composites Technology and Research, 13(4):236–248
5.
SumichM.KedwardK.. 1991.“Development of a Fatigue-Life Methodology for Composite Structures Subjected to Out-of-Plane Load Components,” NASA TM 102885
6.
MartinR. H.JacksonW. C.. 1991.“Damage Prediction in Cross-Plied Curved Composite Laminates,” NASA TM 104089, USAAVSCOM TR 91-B-009
7.
JonesR. M.1975.Mechanics of Composite Materials.New York, NY: McGraw-Hill Book Co
LagaceP. A.WeemsD. B.. 1989.“A Through-the-Thickness Strength Specimen for Composites,”Test Methods for Design Allowables for Fibrous Composites: 2nd Volume, ASTM STP 1003, ChamisC. C., ed., American Society for Testing and Materials, Philadelphia, pp. 197–207
10.
AdamsD. F.WalrathD. E.. 1987.“Current Status of the Iosipescu Shear Test Method,”Journal of Composite Materials, 21:494–507
11.
WalrathD. E.AdamsD. F.. 1983.“The Iosipescu Shear Test as Applied to Composite Materials,”Experimental Mechanics, 23:105–110
12.
MortonJ.HoH.TsaiM. Y.. 1992.“An Evaluation of the Iosipescu Specimen for Composite Materials Shear Property Measurement,”Journal of Composite Materials, 26:708–750
13.
WilsonD. W.1990.“Evaluation of the V-Notched Beam Shear Test Through an Interlaboratory Study,”Journal of Composites Technology and Research, 12(3):131–138
14.
KesslerJ. A.AdamsD. F.. 1991.“Composite Specimen Design Analysis—Volume II: Experimental Efforts—Appendix: Stress Strain Curves,” U. S. Army Materials Technology Laboratory MTL TR 91-5
15.
IfjuP.PostD.. 1991.“A Special Strain Gage for Shear Testing of Composite Materials,”Proceedings SEM Spring Conference on Experimental Mechanics, Milwaukee, WI
16.
GuoY.IfjuP.. 1991.“A Practical Moiré Interferometry System for Testing Machine Applications”Experimental Techniques, 15(1):29
17.
ASTM Specification D3171-76.1990.Test Method for Fiber Content of Resin-Matrix Composites by Matrix Digestion, ASTM Book of Standards, Vol. 15.03
18.
ASTM Specification D2584-68. 1990.Test Method for Ignition Loss of Cured Reinforced Resins, ASTM Book of Standards, Vol. 8.02
19.
PostD.1988.“Moire Interferometry for Composites,”Manual on Experimental Methods for Mechanical Testing of Composites, Chapter 4, TuttleM. E.PendletonR. L., eds., Society for Experimental Mechanics
20.
HibbittKarlssonSorensenand. 1988.“ABAQUS User's Manual,” Version 4.7, Hibbitt, Karlsson and Sorensen, Inc., Providence, RI
21.
PecknoldD. A.1990.“A Framework for 3-D Nonlinear Modeling of Thick-Section Composites,” DTRC/SME-90-92
22.
RahmanS.PecknoldD. A.. 1992.Micromechanics-Based Analysis of Fiber-Reinforced Laminated Composites. PhD Dissertation, Department of Civil Engineering, University of Illinois at Urbana-Champaign
23.
HashinZ.RosenB. W.. 1964.“The Elastic Moduli of Fiber Reinforced Materials,Journal of Applied Mechanics, 31:233
24.
AdamsD. F.CraneD. A.. 1984.“Combined Loading Micromechanical Analysis of a Unidirectional Composite,”Composites, 15(3):181–192
25.
RambergW.OsgoodW. R.. 1943.“Description of Stress-Strain Curves by Three Parameters,”National Advisory Committee for Aeronautics, NACA, TN 902
26.
WYO2D Finite Element Analysis Computer Program User Instructions and Documentation, November1990.Composite Materials Research Group, Mechanical Engineering Department, University of Wyoming, Laramie, Wyoming
27.
DieterG. E.1961.Mechanical Metallurgy.New York, NY: McGraw-Hill Book Co
HajaliR.1991. PhD Dissertation Work, Department of Civil Engineering, University of Illinois at Urbana-Champaign
30.
DallyJ. W.RileyW. F.McConnellK. G.. 1984.Instrumentation for Engineering Measurements.New York, NY: John Wiley and Sons, Inc
31.
KnightM.1982.“Three-Dimensional Elastic Moduli of Graphite/Epoxy Composites,”Journal of Composite Materials, 16:153–159
32.
CamponeschiE. T.1990.“Compression Response of Thick-Section Composite Materials,” DTRC-SME-90/92
33.
SwansonS. R.MessickM.ToombesG. R.. 1985.“Comparisons of Torsion Tube and Iosipescu In-Plane Shear Test Results for a Carbon Fibre-Reinforced Epoxy Composite,”Composites, 16(3):220–224
34.
HoH.TsaiM.MortonJ.FarleyG. L.. 1991.Virginia Polytechnic Institute and State University. “Comparison of Three Popular Test Methods for Determining the Shear Modulus of Composite Materials,” NASA-CR-190659
35.
SullivanJ. L.KaoB. G.Van OeneH.. 1984.“Shear Properties and a Stress Analysis Obtained from Vinyl-Ester Iosipescu Specimens,”Experimental Mechanics, 24(3):223–231
36.
DanielW. K.MarisJ. L.Van SiclenR. C.. 1984.“Aluminum Metal Matrix Concepts for Missile Airframes,” AFWAL-TR-84-3065, LTV Aerospace and Defense Company
