Statistical evaluation of solid particle erosion behaviour of aluminium matrix composites reinforced with rice husk derived silicon based refractory compounds
Restricted accessResearch articleFirst published online 2026
Statistical evaluation of solid particle erosion behaviour of aluminium matrix composites reinforced with rice husk derived silicon based refractory compounds
A silicon-based refractory compound (SiRC) derived from rice husk was utilized as a sustainable reinforcement for fabricating AlSi10Mg composites through the powder metallurgy route. XRD analysis confirmed the presence of Al, Si, MgO, and SiO2 phases, while SEM–EDS revealed a uniform distribution of SiRC particles and strong interfacial bonding. The composite density decreased from 2.61 g/cm3 to 2.32 g/cm3 at 9 wt.% SiRC, accompanied by a 26% increase in hardness attributed to the hard ceramic phases and grain refinement. Response Surface Methodology (RSM) was applied to model and optimize erosive wear performance by considering impingement angle, impact velocity, and reinforcement content. The quadratic regression model exhibited an excellent fit (R2 = 0.9976), and ANOVA identified impact velocity as the most influential factor. The optimized parameters 90° impingement angle, 40 m/s velocity, and 6 wt.% SiRC yielded a minimum erosion rate of 14.13 mg/kg with a deviation of only 0.91%, validating the model’s accuracy and demonstrating the enhanced erosion resistance of the developed composites.
SahooSSamalSBhoiB. Fabrication and characterization of novel Al-SiC-hBN self-lubricating hybrid composites. Mater Today Commun2020; 25: 101402. https://doi.org/10.1016/j.mtcomm.2020.101402
2.
OrhadahweTAAjideOOAdelekeAA, et al.A review on primary synthesis and secondary treatment of aluminium matrix composites. Arab J Basic Appl Sci2020; 27: 389–405. https://doi.org/10.1080/25765299.2020.1830529
3.
DixitPSuhaneA. A comprehensive review on selective laser melting of aluminium matrix composites reinforced with silicon carbide. Progr Addit Manuf2024; 10: 4419–4445. https://doi.org/10.1007/s40964-024-00883-8
4.
Sathish KumarRKSasikumarRDhilipkumarT. Exploiting agro-waste for cleaner production: a review focusing on biofuel generation, bio-composite production, and environmental considerations. J Clean Prod2024; 435: 140536. https://doi.org/10.1016/j.jclepro.2023.140536
5.
SadhPKDuhanSDuhanJS. Agro-industrial wastes and their utilization using solid state fermentation: a review. Bioresour Bioprocess2018; 5: 1. https://doi.org/10.1186/s40643-017-0187-z
6.
NimitaJJSelvan ChristyrajJDPrasannanA, et al.Current scenario of solid waste management techniques and challenges in Covid-19 – a review. Heliyon2022; 8. https://doi.org/10.1016/j.heliyon.2022.e09855
7.
WangXLiCLamCH, et al.Emerging waste valorisation techniques to moderate the hazardous impacts, and their path towards sustainability. J Hazard Mater2022; 423: 127023. https://doi.org/10.1016/j.jhazmat.2021.127023
8.
KumarANiralaASinghVP, et al.The utilisation of coconut shell ash in production of hybrid composite: microstructural characterisation and performance analysis. J Clean Prod2023; 398: 136494. https://doi.org/10.1016/j.jclepro.2023.136494
9.
MałekMSmarzewskiPJackowskiM, et al. Comparative study of agricultural wastes utilization in cementitious composites. J Nat Fibers. 2025; 22. https://doi.org/10.1080/15440478.2025.2453488
10.
KalkanisKAlexakisDEKyriakisE, et al.Transforming waste to wealth, achieving circular economy. Circ Econ Sustain2022; 2: 1541–1559. https://doi.org/10.1007/s43615-022-00225-2
11.
NasresfahaniMRShamanianM. Characterization of Al1100-RHA composite developed by accumulative roll bonding. J Compos Mater2019; 53: 2047–2052. https://doi.org/10.1177/0021998318817938
12.
ShaikhMBNArifSAzizT, et al.Microstructural, mechanical and tribological behaviour of powder metallurgy processed SiC and RHA reinforced Al-based composites. Surf Interfaces2019; 15: 166–179. https://doi.org/10.1016/j.surfin.2019.03.002
13.
AdediranAAAlanemeKKOladeleIO, et al. Microstructural characteristics and mechanical behaviour of aluminium matrix composites reinforced with Si-based refractory compounds derived from rice husk. Cogent Eng. 2021; 8. https://doi.org/10.1080/23311916.2021.1897928
14.
OlanrewajuOOladeleIOAdelaniSO. Recent advances in natural fiber reinforced metal/ceramic/polymer composites: an overview of the structure-property relationship for engineering applications. Hybrid Adv2025; 8: 100378. https://doi.org/10.1016/j.hybadv.2025.100378
15.
ManickarajKThirumalaisamyRPalanisamyS, et al.Value-added utilization of agricultural wastes in biocomposite production: characteristics and applications. Ann N Y Acad Sci2025; 1549: 72–91. https://doi.org/10.1111/nyas.15368
16.
XuQZhangTNiuY, et al.A comprehensive review on agricultural waste utilization through sustainable conversion techniques, with a focus on the additives effect on the fate of phosphorus and toxic elements during composting process. Sci Total Environ2024; 942: 173567. https://doi.org/10.1016/j.scitotenv.2024.173567
LodheMSelvamAUdayakumarA, et al.Effect of polycarbosilane addition to a mixture of rice husk and coconut shell on SiC whisker growth. Ceram Int2016; 42: 2393–2401. https://doi.org/10.1016/j.ceramint.2015.10.037
20.
NayakPPDattaAK. Synthesis of SiO2-Nanoparticles from rice husk ash and its comparison with commercial amorphous silica through material characterization. Silicon2021; 13: 1209–1214. https://doi.org/10.1007/s12633-020-00509-y
21.
DixitPSuhaneA. Aluminum metal matrix composites reinforced with rice husk ash: a review. Mater Today Proc2022; 62: 4194–4201. https://doi.org/10.1016/j.matpr.2022.04.711. Elsevier Ltd.
22.
DorairajDGovenderNZakariaS, et al.Green synthesis and characterization of UKMRC-8 rice husk-derived mesoporous silica nanoparticle for agricultural application. Sci Rep2022; 12: 20162. https://doi.org/10.1038/s41598-022-24484-z
23.
LaadMDatkhileRShanmuganS. Synthesis and characterization of powder silica: a judicious recycling of the natural ceramic rice husk ash. Silicon2022; 14: 1123–1132. https://doi.org/10.1007/s12633-020-00915-2
24.
YunYH. Characterization of SiC powders synthesized from rice husks and fused silica powder by carbothermal reduction reaction. J Ceram Process Res2022; 23: 247–251. https://doi.org/10.36410/jcpr.2022.23.3.247
25.
ParveezBMalequeMAJamalNA. Influence of agro-based reinforcements on the properties of aluminum matrix composites: a systematic review. J Mater Sci2021; 56: 16195–16222. https://doi.org/10.1007/s10853-021-06305-2
26.
SoltaniNBahramiAPech-CanulMI, et al.Review on the physicochemical treatments of rice husk for production of advanced materials. Chem Eng J2015; 264: 899–935. https://doi.org/10.1016/j.cej.2014.11.056
27.
GollaCBNarasimha RaoRIsmailS, et al. Experimental investigations with machine learning techniques for understanding of erosion wear in advanced aluminum nanocomposites. Proc Inst Mech Eng Part E J Process Mech Eng. 2024. https://doi.org/10.1177/09544089241253405
28.
AliMTindyalaMA. Thermoanalytical studies on acid-treated rice husk and production of some silicon based ceramics from carbonised rice husk. J Asian Ceram Soc2015; 3: 311–316. https://doi.org/10.1016/j.jascer.2015.06.003
29.
NayakPPDattaAK. Synthesis and characterization of Si/SiO2/SiC composites through carbothermic reduction of rice husk-Based silica. Silicon2023; 15: 3581–3590. https://doi.org/10.1007/s12633-022-02278-2
ChinnamahammadBhashaABalamuruganK. Studies on Al6061nanohybrid composites reinforced with SiO2/3x% of TiC -a agro-waste. Silicon2022; 14: 13–26. https://doi.org/10.1007/s12633-020-00758-x
32.
GladstonJAKSheriffNMDinaharanI, et al.Production and characterization of rich husk ash particulate reinforced AA6061 aluminum alloy composites by compocasting. Trans Nonferrous Met Soc China2015; 25: 683–691. https://doi.org/10.1016/S1003-6326(15)63653-6
33.
GuptaVSinghBMishraRK. Tribological characteristics of AA7075 composites reinforced with rice husk ash and carbonized eggshells. Proc Inst Mech Eng Part L2021; 235: 2600–2613. https://doi.org/10.1177/14644207211025810
34.
RanjanAKumarHNagdeveL, et al.Mechanical properties of rice husk ash, an environmental pollutant, based composites: a step towards sustainable hybrid composites. Energy Sources Part A2022; 44: 9584–9602. https://doi.org/10.1080/15567036.2022.2130476
35.
ThiagarajanGLatifNAFarahinN, et al.Advanced research in natural fibers preliminary study on crystallinity of rice husk ash reinforcement for metal matrix composite. Advanced Research in Natural Fibers2020; 2: 21–24.
36.
PattnayakAMadhuNPandaAS, et al.A comparative study on mechanical properties of Al-SiO2 composites fabricated using rice husk silica in crystalline and amorphous form as reinforcement. Mater Today Proc2018; 5: 8184–8192. https://doi.org/10.1016/j.matpr.2017.11.507. Elsevier Ltd.
PatnaikASatapathyAChandN, et al.Solid particle erosion wear characteristics of fiber and particulate filled polymer composites: a review. Wear2010; 268: 249–263. https://doi.org/10.1016/j.wear.2009.07.021
YadavMKumaraswamidhasLAKumarA, et al.Erosion behavior of Al-SiC and Al-WC MMCs via powder metallurgy under solid particle impingement. Sci Rep2024; 14: 29533. https://doi.org/10.1038/s41598-024-71368-5
OkokpujieIPTartibuLKBabaremuK, et al.Study of the corrosion, electrical, and mechanical properties of aluminium metal composite reinforced with coconut rice and eggshell for wind turbine blade development. Clean Eng Technol2023; 13: 100627. https://doi.org/10.1016/j.clet.2023.100627
46.
OkokpujieIPTartibuLK. Aluminum alloy reinforced with agro-waste, and eggshell as viable material for wind turbine blade to annex potential wind energy: a review. J Compos Sci2023; 7: 161. https://doi.org/10.3390/jcs7040161
47.
DasSMondalDPSawlaS. Solid particle erosion of Al alloy and Al-alloy composites: effect of heat treatment and angle of impingement. Metall Mater Trans2004; 35: 1369–1379. https://doi.org/10.1007/s11661-004-0312-4
48.
YadavMKumaraswamidhasLASinghSK. Investigation of solid particle erosion behavior of Al-Al2O3 and Al-ZrO2 metal matrix composites fabricated through powder metallurgy technique. Tribol Int2022; 172: 107636. https://doi.org/10.1016/j.triboint.2022.107636
49.
Mosleh-ShiraziSAkhlaghiFLiDY. Effect of graphite content on the wear behavior of Al/2SiC/Gr hybrid nano-composites respectively in the ambient environment and an acidic solution. Tribol Int2016; 103: 620–628. https://doi.org/10.1016/j.triboint.2016.08.016
50.
BalamuruganKShanmugamVPalaniG, et al.Effect of TiC/RHA on solid particle erosion of Al6061 hybrid composites fabricated through a 2-step ultrasonic-assisted stir casting process. J Mater Res Technol2023; 25: 4888–4900. https://doi.org/10.1016/j.jmrt.2023.06.225
SNVChelladuraiSJSAS. Investigating the effect and optimization of WEDM parameters on LM26 aluminium alloy hybrid composites: an response surface methodology based desirability approach. Silicon2025; 17: 3125–3155. https://doi.org/10.1007/s12633-025-03398-1
53.
KaplanANKayacanMYOzkahramanM. Response surface methodology-based experimental and statistical analysis of polyester resin composites reinforced with silicon carbide and alumina powders. Silicon2025; 17: 3071–3086. https://doi.org/10.1007/s12633-025-03383-8
