The 3D printing of composite materials especially, nanocomposites, is an essential step in exploring new perspectives for the applications of organic matrix composite materials for industrial applications. In this work, the effect of ceramic nanofillers on the mechanical properties of a thermoplastic matrix is studied using different wt% of nanofillers (AEROSIL). The results showed that the increase in the wt% of AEROSIL resulted in an increase in the mechanical properties in terms of hardness, stiffness, ductility, and tensile strength. Moreover, these samples were 3D printed and were compared with the samples prepared by conventional injection moulding. The comparison characterized the influence of the manufacturing method on the mechanical performance of materials. Although there was very little behavior difference in both samples, the 3D-printed samples showed a weight reduction. This has broadened the possible applications of this material and technique in areas where weight is of utmost significance.
YamashitaMGotohM. Impact behavior of honeycomb structures with various cell specifications—numerical simulation and experiment. Int J Impact Eng2005; 32(1): 618–630. DOI: 10.1016/j.ijimpeng.2004.09.001.
2.
WangLSaitoKGotouY, et al.Design and fabrication of aluminum honeycomb structures based on origami technology. J Sandw Struct & Mater2019; 21(4): 1224–1242. DOI: 10.1177/1099636217714646.
ZahlanNO’NeillJM. Design and fabrication of composite components; the spring-forward phenomenon. Composites1989; 20(1): 77–81. DOI: 10.1016/0010-4361(89)90685-X.
5.
GoodhueWV. U.S. Patent No. 5228936, 1993.
6.
HuebnerF. U. S. Patent No. 4957577, 1990.
7.
El MoumenATarfaouiMLafdiK. Additive manufacturing of polymer composites: Processing and modeling approaches. Compos Part B Eng2019; 171: 166–182. DOI: 10.1016/j.compositesb.2019.04.029.
8.
GibsonI, et al. Additive manufacturing technologies. switzerland: Springer, 2021, 17.
HuXFChenBYTirvaudeyM, et al.Integrated XFEM-CE analysis of delamination migration in multi-directional composite laminates. Compos Part A Appl Sci Manuf2016; 90: 161–173. DOI: 10.1016/j.compositesa.2016.07.007.
11.
ChihiMTarfaouiMQureshiY, et al.Effect of carbon nanotubes on the in-plane dynamic behavior of a carbon/epoxy composite under high strain rate compression using SPHB. Smart Mater Struct2020; 29. [Online]. Available:http://iopscience.iop.org/10.1088/1361-665X/ab83cd
12.
KhammassiSTarfaouiMŠkrlováK, et al.Poly(Lactic Acid) (PLA)-based nanocomposites: impact of vermiculite, silver, and graphene oxide on thermal stability, isothermal crystallization, and local mechanical behavior. J Compos Sci2022; 6(4). DOI: 10.3390/jcs6040112.
13.
KhammassiSTarfaouiMQureshiY, et al.Mechanical properties of graphene nanoplatelets reinforced epikote 828 under dynamic compression. Mech Mater2021; 158: 103873. DOI: 10.1016/j.mechmat.2021.103873.
14.
TarfaouiMLafdiKBeloufaI, et al.Effect of graphene nano-additives on the local mechanical behavior of derived polymer nanocomposites. Polymers (Basel)2018; 10(6). DOI: 10.3390/polym10060667.
15.
YangMYuanYLiY, et al.Dramatically enhanced electromagnetic wave absorption of hierarchical CNT/Co/C fiber derived from cotton and metal-organic-framework. Carbon N Y2020; 161: 517–527. DOI: 10.1016/j.carbon.2020.01.073.
16.
SongYZhengQ. Effect of voltage on the conduction of a high-density polyethylene/carbon black composite at the NTC region. Compos Sci Technol2006; 66(7): 907–912. DOI: 10.1016/j.compscitech.2005.07.041.
17.
El MoumenATarfaouiMLafdiK. Mechanical characterization of carbon nanotubes based polymer composites using indentation tests. Compos Part B Eng2017; 114(1–7). DOI: 10.1016/j.compositesb.2017.02.005.
18.
QureshiYTarfaouiMLafdiK. Fabrication and electromechanical performance of carbon nanotube based conductive membrane and its application in real-time multimode strain detection in composites. Mater Sci Eng B2021; 268: 115120.
19.
El MoumenATarfaouiMLafdiK, et al.Dynamic properties of carbon nanotubes reinforced carbon fibers/epoxy textile composites under low velocity impact. Compos Part B Eng2017; 125(1–8), DOI: 10.1016/j.compositesb.2017.05.065.
20.
MoumenATarfaouiMHassoonO, et al. Experimental study and numerical modelling of low velocity impact on laminated composite reinforced with thin film made of carbon nanotubes. Appl Compos Mater. 2017; 25. doi:10.1007/s10443-017-9622-8
21.
BenyahiaMTarfaouiMDatsyukD, et al.Dynamic properties of hybrid composite structures based multiwalled carbon nanotubes. Compos Sci Technol2017; 148. DOI: 10.1016/j.compscitech.2017.05.021.
22.
QureshiYTarfaouiMLafdiKK, et al.Real-time strain monitoring performance of flexible Nylon/Ag conductive fiber. Sensors Actuators A Phys2019; 295. DOI: 10.1016/j.sna.2019.06.036.
23.
ChronakisIS. Novel nanocomposites and nanoceramics based on polymer nanofibers using electrospinning process—A review. J Mater Process Technol2005; 167(2): 283–293, DOI: 10.1016/j.jmatprotec.2005.06.053.
24.
Ritzhaupt-KleisslEBoehmJHausseltJ, et al.Thermoplastic polymer nanocomposites for applications in optical devices. Mater Sci Eng C2006; 26(5): 1067–1071. DOI: 10.1016/j.msec.2006.02.004.
25.
GiannelisEP. A new strategy for synthesizing polymer-ceramic nanocomposites. JOM1992; 44(3): 28–30. DOI: 10.1007/BF03222789.
26.
KhavryuchenkoVDV KhavryuchenkoOV LisnyakV. Formation of pyrogenic silica: spectroscopic and quantum chemical insight. Crit Rev Solid State Mater Sci2011; 36(2): 47–65. DOI: 10.1080/10408436.2011.572741.
XiaoYWangYLuoG, et al.Using hydrolysis of silicon tetrachloride to prepare highly dispersed precipitated nanosilica. Chem Eng J2015; 283. DOI: 10.1016/j.cej.2015.07.045.
29.
LattaBM. Improved tactile and sorption properties of polyester fabrics through caustic treatment. Text Res J1984; 54(11): 766–775. DOI: 10.1177/004051758405401110.
30.
Principes fondamentaux et applications AEROSIL en pharmacie et en cosmétique/par Horst Ferch, no. pt. 6. Germany: Geschäftsbereich Pigmente: Degussa, 1982.
31.
KunadtAStarkeEPfeiferG, et al.Messtechnische Eigenschaften von Dehnungssensoren aus Kohlenstoff-Filamentgarn in einem VerbundwerkstoffMeasuring Performance of Carbon Filament Yarn Strain Sensors Embedded in a Composite. tm-Technisches Mess Plattf für Methoden, Syst und Anwendungen der Messtechnik2010; 77(2): 113–120.
32.
BurgentzléDDuchetJGérardJF, et al.Solvent-based nanocomposite coatings I. Dispersion of organophilic montmorillonite in organic solvents. J Colloid Interface Sci2004; 278(1): 26–39. DOI: 10.1016/j.jcis.2004.05.015.
33.
KhanURyanKBlauWJ, et al.The effect of solvent choice on the mechanical properties of carbon nanotube–polymer composites. Compos Sci Technol2007; 67(15): 3158–3167. DOI: 10.1016/j.compscitech.2007.04.015.
34.
AlamriHLowIM. Effect of water absorption on the mechanical properties of nanoclay filled recycled cellulose fibre reinforced epoxy hybrid nanocomposites. Compos Part A Appl Sci Manuf2013; 44: 23–31. DOI: 10.1016/j.compositesa.2012.08.026.
35.
LeboeufMGhamriNBruléB, et al.Influence of mixing conditions on rheological behavior and electrical conductivity of polyamides filled with carbon black. Rheol Acta2008; 47(2): 201–212. DOI: 10.1007/s00397-007-0232-5.
36.
KodaliDUmerahCOIdreesMO, et al.Fabrication and characterization of polycarbonate-silica filaments for 3D printing applications. J Compos Mater2021; 55(30): 4575–4584. DOI: 10.1177/00219983211044748.
