Restricted accessResearch articleFirst published online 2022-3
Fracture toughness and fractographic investigation of polybutylene terephthalate/thermoplastic polyurethane binary blends reinforced by multi-walled carbon nanotubes using essential work of fracture approach
In this paper, fracture toughness evaluation of polybutylene terephthalate (PBT)/thermoplastic polyurethane (TPU) binary blends and PBT/TPU/carbon nanotubes (CNTs) ternary nanocomposites have been conducted using both Izod impact and quasi-static fracture tests. Essential work of fracture (EWF) approach is used to study the fracture properties in details. The results of EWF tests revealed an effective role of TPU and CNTs in toughening mechanism of binary blends and ternary nanocomposites. According to EWF results, both the crack resistance and plastic deformation energies promoted in all compounds as compared to neat PBT. Energy dissipation in the yielding and tearing stages determined by the energy partitioning method. The obtained results indicated that displacement up to the failure point increased by increasing the TPU content, while inclusion of CNTs reduced this quantity. The specific non-essential work of fracture , , and increased with increasing the TPU contents which is confirmed by load-displacement curves. Whereas, addition of CNTs reduced and values as compared to reference binary blend, however, ternary nanocomposites still have higher values as compared to pure PBT. In contrast with EWF results, high strain rate of impact test prevents the activation of toughness improving mechanisms that readily occurs in quasi-static loading.
WangJJinXLiC, et al.Graphene and graphene derivatives toughening polymers: Toward high toughness and strength. Chem Eng J2019; 370: 831–854. DOI: 10.1016/j.cej.2019.03.229.
2.
PurnomoPSetyariniPHCahyandariD. Fracture toughness characterization of polymers-based composites using essential work of fracture method. IOP Conf Ser Mater Sci Eng2018; 403(1): 012086. DOI: 10.1088/1757-899X/403/1/012086.
3.
ChopraSDeshmukhKAPeshweD. Theoretical prediction of interfacial properties of PBT/CNT nanocomposites and its experimental evaluation. Mech Mater2017; 109: 11–17. DOI: 10.1016/j.mechmat.2017.03.012.
4.
ShangMChengHShentuB, et al.Preparation of PBT/POE‐ g ‐GMA/PP ternary blends with good rigidity-toughness balance by core-shell particles. J Appl Polym Sci2020; 137(28): 48872–48913. DOI: 10.1002/app.48872.
5.
PesetskiiSShevchenkoVKovalV. Effect of isocyanate chain extender on the structure and properties of the blends of poly(butylene terephthalate) and thermoplastic polyester elastomer. J Thermoplastic Compos Mater2017; 30(12): 1581–1602. DOI: 10.1177/0892705716646419.
6.
CaoYXuPWuB, et al.High-performance and functional PBT/EVMG/CNTs nanocomposites from recycled sources by in situ multistep reaction-induced interfacial control. Compos Sci Technol. 2020; 190: 108043. DOI: 10.1016/j.compscitech.2020.108043
7.
ArslanCDoganM. The mechanical and thermal properties of chopped basalt fiber-reinforced poly (butylene terephthalate) composites: Effect of fiber amount and length. J Compos Mater2019; 53(17): 2465–2475. DOI: 10.1177/0021998319830775.
8.
KimSJShinBSHongJL, et al.Reactive compatibilization of the PBT/EVA blend by maleic anhydride. Polymer (Guildf)2001; 42(9): 4073–4080. DOI: 10.1016/S0032-3861(00)00810-7.
9.
ShangMWuYShentuB, et al.Toughening of PBT by POE/POE-g-GMA elastomer through regulating interfacial adhesion and toughening mechanism. Ind Eng Chem Res2019; 58(28): 12650–12663.
10.
HuangJLuXZhangG, et al.Study on the rheological, thermal and mechanical properties of thermoplastic polyurethane/poly (butylene terephthalate) blends. Polym Test2014; 36: 69–74.
11.
LievanaEKarger-KocsisJ. Impact Modification of PA-6 and PBT by Epoxy-Functionalized Rubbers. Macromol Symp2003; 202: 59–66. DOI: 10.1002/masy.200351206.
12.
HajibabazadehSPalahangMRazavi AghjehMK. Effect of morphology development on mechanical properties and fracture behavior of PP/EPDM/SiO2 blend-nanocomposites. Polym Test2019; 73: 124–134. DOI: 10.1016/j.polymertesting.2018.11.029.
13.
MousaviMRTehranACShelesh-NezhadK. Study on morphology, mechanical, thermal and viscoelastic properties of PA6/TPU/CNT nanocomposites. Plast Rubber Compos2020; 49: 1–14.
14.
WangfeiXHezhenZhuiYJ, et al.Super toughened immiscible poly(L-lactide)/poly(ethylene vinyl acetate) (PLLA/EVA) blend achieved by in situ cross-linking reaction and carbon nanotubes. Compos A Appl Sci Manuf2016; 91: 105–116. DOI: 10.1016/j.compositesa.2016.09.020.
15.
ShangMGaoZChengH, et al.Comparative Study of Poly (butylene terephthalate)/Carbon Nanotube Nanocomposites with Non-reactive and Reactive Elastomers: Morphology and Properties. Ind Eng Chem Res2020; 59(32): 14306–14314.
16.
WiwattananukulRFanBYamaguchiM. Improvement of rigidity for rubber-toughened polypropylene via localization of carbon nanotubes. Compos Sci Technol2017; 141: 106–112. DOI: 10.1016/j.compscitech.2017.01.012.
17.
ZottiAZuppoliniSZarrelliM, et al.Fracture toughening mechanisms in epoxy adhesives. Adhes - Appl Prop2016; 54: 237–269. DOI: 10.5772/65250.
18.
BárányTCzigányTKarger-KocsisJ. Application of the essential work of fracture (EWF) concept for polymers, related blends and composites: A review. Prog Polym Sci2010; 35(10): 1257–1287. DOI: 10.1016/j.progpolymsci.2010.07.001.
HossainMMKadamAALeeCF, et al.Numerical modeling of essential work of fracture on ductile polymeric films. Eng Fract Mech2019; 212: 210–220. DOI: 10.1016/j.engfracmech.2019.03.034.
21.
BaranyTCzigányTKarger-KocsisJ. Application of the essential work of fracture (EWF) concept for polymers, related blends and composites: A review. Prog Polym Sci2010; 35(10): 1257–1287.
22.
HeidariFAghalariMChalabi TehranA, et al.Study on the fluidity, mechanical and fracture behavior of ABS/TPU/CNT nanocomposites. J Thermoplast Compos Mater2020; 34: 1037–1051 DOI: 10.1177/0892705720978696.
23.
KhodabandelouMAghjehMKRMazidiMM. Fracture toughness and failure mechanisms in un-vulcanized and dynamically vulcanized PP/EPDM/MWCNT blend-nanocomposites. RSC Adv2015; 5(87): 70817–70831.
24.
ParanSMRNaderiGGhoreishyMHR, et al.Essential work of fracture and failure mechanisms in dynamically vulcanized thermoplastic elastomer nanocomposites based on PA6/NBR/XNBR-grafted HNTs. Eng Fract Mech2018; 200: 251–262.
25.
TehranACShelesh-NezhadKBarazandehFJ. Mechanical and thermal properties of TPU-toughened PBT/CNT nanocomposites. J Thermoplast Compos Mater2019; 32(6): 815–830. DOI: 10.1177/0892705718780198.
26.
HajibabazadehSRazavi AghjehMKPalahangM. Study on the fracture toughness and deformation micro-mechanisms of PP/EPDM/SiO2 ternary blend-nanocomposites. J Compos Mater2020; 54(5): 591–605. DOI: 10.1177/0021998319863475.
27.
TjongSCBaoSPLiangGD. Polypropylene/montmorillonite nanocomposites toughened with SEBS‐g‐MA: Structure–property relationship. J Polym Sci B Polym Phys2005; 43(21): 3112–3126.
28.
WeiG-XSueH-JChuJ, et al.Toughening and strengthening of polypropylene using the rigid–rigid polymer toughening concept Part I. Morphology and mechanical property investigations. Polymer (Guildf)2000; 41(8): 2947–2960.
XueYTangZQinM, et al.Improved toughness of poly (ether‐block‐amide) via melting blending with thermoplastic polyurethane for biomedical applications. J Appl Polym Sci2019; 136(17): 47397.
31.
SetoodehASokhandaniNZebarjadSM. Theoretical and Experimental Study on the Effect of Multi-Walled Carbon Nanotubes on Improving the Tensile Properties and Toughness of Vinyl Ester Resin, 2019.
32.
ColemanJNCadekMRyanKP, et al.Reinforcement of polymers with carbon nanotubes . The role of an ordered polymer interfacial region. Exp Modeling2006; 47: 8556–8561. DOI: 10.1016/j.polymer.2006.10.014.
33.
ZhaoWLiTLiY, et al.Mechanical properties of nanocomposites reinforced by carbon nanotube sponges. J Mater2018; 4(2): 157–164.
34.
GorrasiGSarnoMDi BartolomeoA, et al.Incorporation of carbon nanotubes into polyethylene by high energy ball milling: morphology and physical properties. J Polym Sci Part B Polym Phys2007; 45(5): 597–606.
35.
WilliamsJGRinkM. The standardisation of the EWF test. Eng Fract Mech2007; 74(7): 1009–1017.
36.
MazidiMMAghjehMKRHasanpourM. Fracture resistance and micromechanical deformations in PP/PA6/EPDM ternary blends: effect of rubber functionality, dispersion state and loading conditions. Eng Fract Mech2018; 191: 65–81.
37.
TaibRMGhalebZAMohd IshakZA. Thermal, mechanical, and morphological properties of polylactic acid toughened with an impact modifier. J Appl Polym Sci2012; 123(5): 2715–2725.
38.
ZhangFLiuY. Interphase structures and properties of carbon nanotube-reinforced polymer nanocomposite fibers. In: Carbon Nanotube Fibers and Yarns. Elsevier; 2020, pp. 71–102.
39.
HillRT. On discontinuous plastic states, with special reference to localized necking in thin sheets. J Mech Phys Sol1952; 1(1): 19–30.
40.
Karger-KocsisJFerrer-BalasD. On the plane-strain essential work of fracture of polymer sheets. Polym Bull2001; 46(6): 507–512.
41.
MouzakisDEKarger-KocsisJMoskalaEJ. Interrelation between energy partitioned work of fracture parameters and the crack tip opening displacement in amorphous polyester films. J Mater Sci Lett2000; 19(18): 1615–1619.
42.
MazidiMMBerahmanREdalatA. Phase morphology, fracture toughness and failure mechanisms in super-toughened PLA/PB-g-SAN/PMMA ternary blends: A quantitative analysis of crack resistance. Polym Test2018; 67: 380–391. DOI: 10.1016/j.polymertesting.2018.03.028.
43.
BucknallCB. Toughened Plastics. Springer, 1977.
44.
YoonHOkamotoKUmishitaK, et al.Development of conductive network of multiwalled carbon nanotubes in polycarbonate melt. Polym Compos2011; 32(1): 97–102. DOI: 10.1002/pc.21024.
45.
KhoramishadHZarifpourD. Fracture response of adhesive joints reinforced with aligned multi-walled carbon nanotubes using an external electric field. Theor Appl Fract Mech2018; 98: 220–229. DOI: 10.1016/j.tafmec.2018.10.007.
46.
CuiXHanBZhengQ, et al.Mechanical properties and reinforcing mechanisms of cementitious composites with different types of multiwalled carbon nanotubes. Compos Part A Appl Sci Manuf2017; 103: 131–147.
47.
ChanC-MWuJLiJ-X, et al.Polypropylene/calcium carbonate nanocomposites. Polymer (Guildf)2002; 43(10): 2981–2992.
