This paper outlines progressive damage characteristics of screwed single-lap CFRPI-metal joints subjected to tensile loading at RT (room temperature) and 350°C. Quasi-static tensile tests were performed on screwed single-lap CCF300/AC721-30CrMnSiA joint at RT and 350°C, and the load versus displacement curve, strength and stiffness of joint were gauged and discussed. With due consideration of thermal-mechanical interaction and complex failure mechanism, a modified progressive damage model (PDM) based on the mixed failure criterion was devised to simulate progressive damage characteristics of screwed single-lap CCF300/AC721-30CrMnSiA joint, and simulations correlate well with experiments. By using the PDM, the effects of geometry dimensions on mechanical characteristics of screwed single-lap CCF300/AC721-30CrMnSiA joint were analyzed and discussed.
XiongJJShenoiRA.General aspects on structural integrity. Chin J Aeronaut2019;
32: 114–132.
2.
ThoppulSDFineganJGibsonRF.Mechanics of mechanically fastened joints in polymer–matrix composite structures – a review. Compos Sci Technol2009;
69: 301–329.
3.
MatharuNSMottramJT.Plain and threaded bearing strengths for the design of bolted connections with pultruded FRP material. Eng Struct2017;
152: 878–887.
4.
HizamRMManaloACKarunasenaW, et al.
Effect of bolt threads on the double lap joint strength of pultruded fibre reinforced polymer composite materials. Constr Build Mater2018;
181: 185–198.
5.
ZhuYTAkkermanRXiongJJ, et al.
Evaluation of insert design on the performance of repaired composite-Ti alloy joints. Compos Struct2019;
230: 111506.
6.
ZhuYTXiongJJ.High temperature effect on mechanical performance of screwed CFRC-Ti alloy joints repaired with metal inserts. J Compos Mater2020;
54: 2245–2260.
7.
AktasAImrekHCunediogluY.Experimental and numerical failure analysis of pinned-joints in composite materials. Compos Struct2009;
89: 459–466.
8.
WarrenKCLopez-AnidoRAVelSS, et al.
Progressive failure analysis of three-dimensional woven carbon composites in single-bolt, double-shear bearing. Compos Part B Eng2016;
84: 266–276.
9.
McCarthyMALawlorVPStanleyWF, et al.
Bolt-hole clearance effects and strength criteria in single-bolt, single-lap, composite bolted joints. Compos Sci Technol2002;
62: 1415–1431.
10.
SallamHEMEl-SisiAEAMatarEB, et al.
Effect of clamping force and friction coefficient on stress intensity factor of cracked lapped joints. Eng Failure Anal2011;
18: 1550–1558.
11.
ChishtiMWangCHThomsonRS, et al.
Experimental investigation of damage progression and strength of countersunk composite joints. Compos Struct2012;
94: 865–873.
12.
El-SisiA-DASallamHE-DSalimHA, et al.
Structural behavior of hybrid CFRP/steel bolted staggered joints. Construct Build Mater2018;
190: 1192–1207.
13.
El-SisiAE-DAEl-EmamHMSalimHA, et al.
Sallam HE-DM, deformation and load transfer analysis of staggered composite-steel lap joints subjected to progressive damage. Eng Struct2020;
215: 110690.
14.
WalkerSP.Thermal effects on the pin-bearing behavior of IM7/PETI5 composite joints. J Compos Mater2002;
36: 2623–2651.
15.
HiranoNTakaoYWangWX.Effects of temperature on the bearing strength of CF/epoxy pinned joints. J Compos Mater2007;
41: 335–351.
16.
ZhangJRowlandJ.Damage modeling of carbon-fiber reinforced polymer composite pin-joints at extreme temperatures. Compos Struct2012;
94: 2314–2325.
17.
SoykokIFSaymanOOzenM, et al.
Failure analysis of mechanically fastened glass fiber/epoxy composite joints under thermal effects. Compos Part B: Eng2013;
45: 192–199.
18.
TurveyGJSanaA.Pultruded GFRP double-lap single-bolt tension joints – temperature effects on mean and characteristic failure stresses and knock-down factors. Compos Struct2016;
153: 624–631.
19.
Editorial Board of China Aeronautical Materials Handbook.China aeronautical materials handbook. 2nd ed.Beijing:
China Standard Press, 2002.
20.
TuronADávilaCGCamanhoPP, et al.
An engineering solution for mesh size effects in the simulation of delamination using cohesive zone models. Eng Fract Mech2007;
74: 1665–1682.
21.
TuronACamanhoPPCostaJ, et al.
Accurate simulation of delamination growth under mixed-mode loading using cohesive elements: definition of interlaminar strengths and elastic stiffness. Compos Struct2010;
92: 1857–1864.
22.
UematsuYKitamuraTOhtaniR, et al.
Temperature dependence of delamination fracture toughness of CF/PEEK and CF/PMR-15 laminates. JSMET1993;
59: 2286–2291.
23.
QinTLZhaoLBZhangJY.Fastener effects on mechanical behaviors of double-lap composite joints. Compos Struct2013;
100: 413–423.
24.
GiuntaGCatapanoABelouettarS, et al.
Failure analysis of composite plates subjected to localized loadings via a unified formulation. J Eng Mech2012;
138: 458–467.
25.
GiuntaGCatapanoABelouettarS.Failure indentation analysis of composite sandwich plates via hierarchical models. J Sandwich Struct Mater2013;
15: 45–70.
26.
El-SisiAE-DAEl-EmamHMSalimHA, et al.
Efficient 3D modeling of damage in composite materials. J Compos Mater2015;
49: 817–828.
27.
ChengZQXiongJJ.Progressive damage behaviors of woven composite laminates subjected to LVI, TAI and CAI. Chin J Aeronaut2020;
33: 2807–2823.
28.
CamanhoPPMatthewsFL.A progressive damage model for mechanically fastened joints in composite laminates. J Compos Mater1999;
33: 2248–2280.
29.
TserpesKILabeasGPapanikosP, et al.
Strength prediction of bolted joints in graphite/epoxy composite laminates. Compos Part B: Eng2002;
33: 521–529.
30.
MaimiPCamanhoPPMayugoJA, et al.
A continuum damage model for composite laminates: part II – computational implementation and validation. Mech Mater2007;
39: 909–919.
