Abstract
A microstructure-based comprehensive finite element model, which incorporated the deformation/fracture of the matrix alloy, fracture of the particle and decohesion of interface, was built to predict the effects of particle size and shape on the plastic deformation and fracture behaviors in particle-reinforced metal matrix composites. The effect of particle size on the yield strength and work hardening rate of the matrix alloy was demonstrated. When the particle diameter is <10 µm, the fracture of the matrix alloy near the interface dominates the failure mechanism of the composite, whereas changed to particle fracture with particle diameter >10 µm. A cohesive zone model was also included in order to predict interfacial failure behavior. It was noted that SiC/Al interface exhibits a high interfacial bonding strength and the interfacial decohesion was caused by crack propagation from the particle to the interface. The simulation results are in good agreement with the experiment tensile test results in the SiCp/6061Al composite.
Get full access to this article
View all access options for this article.
References
Supplementary Material
Please find the following supplemental material available below.
For Open Access articles published under a Creative Commons License, all supplemental material carries the same license as the article it is associated with.
For non-Open Access articles published, all supplemental material carries a non-exclusive license, and permission requests for re-use of supplemental material or any part of supplemental material shall be sent directly to the copyright owner as specified in the copyright notice associated with the article.
