The paper presents a new approach in the field of metal–matrix composite characterisation where an electrical conductivity measurement was used to calculate the electron part of composite thermal conductivity by using the Wiedemann–Franz law. The electrical and thermal conductivities of the composite were characterised and their relationship was analysed. Results showed that in comparison with simple analytical models, this method can also be used for predicting the thermal conductivity of the copper matrix–continuous carbon fibre composite in a transverse direction. The unidirectional composite was produced by diffusion bonding and contained 40–60 vol.% of unidirectional fibres. Experiments were performed in directions parallel and normal to the fibre orientation and showed that with an increasing ratio of fibre volume, both thermal and electrical conductivities decreased from 221.6 W/m·K to 38.7 W/m·K and from 35.8 MS/m to 5.3 MS/m, respectively.
KorbGKorábJGrobothG. Thermal expansion behaviour of unidirectional carbon-fibre reinforced copper-matrix composites. Compos Part A: Appl Sci Manuf1999; 29: 1563–1567.
2.
KováčikJEmmerŠBielekJ. Thermal properties of Cu-graphite composites. Kovove Mater Metallic Mater2004; 42: 365–374.
3.
Dwarakanath S, Raj PM, Smet V, et al. High-temperature and moisture-ageing reliability of high-density power packages for electric vehicles. In: Proceedings of IEEE 68th electronic components and technology conference, San Diego, USA, 2018.
4.
Silvain JF, Heintz JM, Guillemet T, et al. Role of metal/matrix, interfaces in the thermal management of metal-carbon composites. In: Proceedings of the international congress on applications of lasers & electro-optics, Tokyo, Japan, 2012.
5.
ChungDDL. Materials for thermal conduction. Appl Therm Eng2001; 21: 1593–1605.
6.
Koráb J, Kavecký Š, Štefánik P, et al. Microstructure and thermal expansion of hybrid-copper alloy composites reinforced with both tungsten and carbon fibres. In: Proceedings of the conference Metallography 2013: Mater Sci Forum, 2014, vol. 782, pp. 513–518.
7.
TavangarRMolinaJWeberL. Assessing predictive schemes for thermal conductivity against diamond-reinforced silver matrix composites at intermediate phase contrast. Scripta Mater2007; 56: 357.
8.
Marcos-GómezDChing-LloydJElizaldeMR, et al.Predicting the thermal conductivity of composite materials with imperfect interfaces. Compos Sci Technol2010; 70: 2276.
9.
Edtmaier C, Bauer C, Segl J, et al. Thermophysical behavior of diamond composites for diode laser heat sink applications at temperatures between 4 K and ambient, In: Proceedings of 46th international conference on environmental systems, ICES-2016-55, Vienna, Austria, 2016.
10.
Koráb J. Thermophysical properties of continuous carbon fibre reinforced-copper matrix composites. PhD Thesis, Vienna University of Technology, Austria, 1999.
11.
Simančík F. Preparation and properties of copper coated carbon fibres. Report, Institute of Materials and Machine Mechanics, Slovak Academy of Sciences, Bratislava, Slovakia, 1989–1990.
Štefánik P, Simančík and Šebo P. The improvement of thermal stability of copper coating on carbon fibres. Report, Institute of Materials and Machine Mechanics, Slovak Academy of Sciences, Bratislava, Slovakia, 1989–1990.
KováčikJEmmerŠBielekJ. Cross-property connections for copper–graphite composites. Acta Mech2016; 227: 105–112.
23.
MazloumAKováčikJEmmerŠ, et al.Copper–graphite composites: Thermal expansion, thermal and electrical conductivities, and cross-property connections. J Mater Sci2016; 51: 7977–7990.
LePetitcorps Y, Poueylaud JM, Albingre L, et al. Carbon fibre reinforced copper matrix composites: processing routes and properties. In: Proceedings of the first international conference on ceramics and metal matrix composite CMMC 96, San Sebastian, Spain, 9–12 September 1996, pp. 327–334.
HasselmanDPHDonaldsonKYThomasJRJr. Effective thermal conductivity of uniaxial composite with cylindrically orthotropic carbon fibers and interfacial thermal barrier. J Compos Mater1993; 27: 637–644.
30.
YanPChenFLJiangCP, et al.An eigenfunction expansion–variational method in prediction of the transverse thermal conductivity of fiber reinforced composites considering interfacial characteristics. Compos Sci Technol2010; 70: 1726–1732.
