The influence of exposure to UV light and moisture on the durability of a multiwalled carbon nanotube(MWCNT)/epoxy nanocomposite was investigated. Samples of epoxy resin based on diglycidyl ether of bisphenol A (DGEBA) cured with 2,2,4-trimethylene-1,6-hexadiamine (TMDA), and epoxy nanocomposite containing 0.5% MWCNT were exposed to different accelerated weathering times between one and six months. Changes in surface chemistry, mechanical properties (tensile tests), thermal properties (thermogravimetric analysis and differential scanning calorimetry), and morphology were evaluated before and after exposure to accelerated weathering for a period of up to six months. Epoxy nanocomposite (DGEBA–TMDA/0.5%MWCNT) samples had improved thermal stability and resistance to degradation, compared to epoxy resin (DGEBA–TMDA). The effect of MWCNT at reducing degradation was more pronounced than previously found for resins prepared with hydrogenated DGEBA.
Mirmohseni-NaminANikafsharSMirmohseniF. Increasing toughness and tensile strength of an epoxy–diamine system using an inorganic ultra-accelerator. RSC Adv2015; 5: 53025–53035.
2.
BakisCEBankLCBrownV, et al.Fiber-reinforced polymer composites for construction—state-of-the-art review. J Compos Constr2002; 6: 73–87.
3.
KajorncheappunngamSGuptaRKGangaRaoHV. Effect of aging environment on degradation of glass-reinforced epoxy. J Compos Constr2002; 6: 61–69.
4.
LingZYangHLiuW, et al.Local bond stress-slip relationships between glue laminated timber and epoxy bonded-in GFRP rod. Constr Build Mater2018; 170: 1–12.
5.
UzelMTogayAAnilÖ, et al.Experimental investigation of flexural behavior of glulam beams reinforced with different bonding surface materials. Constr Build Mater2018; 158: 149–163.
6.
ZhouQGongMChuiY, et al.Measurement of rolling shear modulus and strength of cross-laminated timber using bending and two-plate shear tests. Wood Fiber Sci2014; 46: 259–269.
7.
LuZZhouHLiaoY, et al.Effects of surface treatment and adhesives on bond performance and mechanical properties of cross-laminated timber (CLT) made from small diameter Eucalyptus timber. Constr Build Mater2018; 161: 9–15.
8.
CorcioneCEFrigioneM. UV-cured polymer-boehmite nanocomposite as protective coating for wood elements. Prog Organ Coat2012; 74: 781–787.
9.
MarziT. Nanostructured materials for protection and reinforcement of timber structures: a review and future challenges. Constr Build Mater2015; 97: 119–130.
10.
MalsheVWaghooG. Weathering study of epoxy paints. Prog Organ Coat2004; 51: 267–272.
11.
Ghasemi-KahrizsangiANeshatiJShariatpanahiH, et al.Improving the UV degradation resistance of epoxy coatings using modified carbon black nanoparticles. Prog Organ Coat2015; 85: 199–207.
12.
PetersenEJLamTGorhamJM, et al.Methods to assess the impact of UV irradiation on the surface chemistry and structure of multiwall carbon nanotube epoxy nanocomposites. Carbon2014; 69: 194–205.
13.
WooRSChenYZhuH, et al.Environmental degradation of epoxy–organoclay nanocomposites due to UV exposure. Part I: photo-degradation. Compos Sci Technol2007; 67: 3448–3456.
14.
ZhaiZFengLLiG, et al.The anti-ultraviolet light (UV) aging property of aluminium particles/epoxy composite. Prog Organ Coat2016; 101: 305–308.
15.
MuasherMSainM. The efficacy of photostabilizers on the color change of wood filled plastic composites. Polym Degrad Stab2006; 91: 1156–1165.
16.
AllenNSEdgeMOrtegaA, et al.Degradation and stabilisation of polymers and coatings: nano versus pigmentary titania particles. Polym Degrad Stab2004; 85: 927–946.
17.
AndradyAHamidHTorikaiA. Effects of solar UV and climate change on materials. Photochem Photobiol Sci2011; 10: 292–300.
18.
AlouiFAhajjiAIrmouliY, et al.Inorganic UV absorbers for the photostabilisation of wood-clearcoating systems: comparison with organic UV absorbers. Appl Surf Sci2007; 253: 3737–3745.
19.
Ghasemi-KahrizsangiAShariatpanahiHNeshatiJ, et al.Degradation of modified carbon black/epoxy nanocomposite coatings under ultraviolet exposure. Appl Surf Sci2015; 353: 530–539.
20.
QingYZhouWLuoF, et al.Epoxy-silicone filled with multi-walled carbon nanotubes and carbonyl iron particles as a microwave absorber. Carbon2010; 48: 4074–4080.
21.
TomasRFFinnKHTorbjornO. The optimum dispersion of carbon nanotubes for epoxy nanocomposites: evolution of the particle size distribution by ultrasonic treatment. J Nanotechnol2012; 2012: 14.
22.
BalSSamalS. Carbon nanotube reinforced polymer composites— state of the art. Bull Mater Sci2007; 30: 379.
23.
SchlagenhaufLNüeschFWangJ. Release of carbon nanotubes from polymer nanocomposites. Fibers2014; 2: 108–127.
24.
PetersenEJZhangLMattisonNT, et al.Potential release pathways, environmental fate, and ecological risks of carbon nanotubes. Environ Sci Technol2011; 45: 9837–9856.
25.
NguyenTPetersenEJPellegrinB, et al.Impact of UV irradiation on multiwall carbon nanotubes in nanocomposites: formation of entangled surface layer and mechanisms of release resistance. Carbon2017; 116: 191–200.
26.
AschbergerKJohnstonHJStoneV, et al.Review of carbon nanotubes toxicity and exposure—appraisal of human health risk assessment based on open literature. Crit Rev Toxicol2010; 40: 759–790.
27.
XiaTLiNNelAE. Potential health impact of nanoparticles. Annu Rev Public Health2009; 30: 137–150.
28.
HellandAWickPKoehlerA, et al.Reviewing the environmental and human health knowledge base of carbon nanotubes. Ciência Saúde Coletiva2008; 13: 441–452.
29.
AtifRInamF. Reasons and remedies for the agglomeration of multilayered graphene and carbon nanotubes in polymers. Beilstein J Nanotechnol2016; 7: 1174–1196.
30.
RahmatMHubertP. Carbon nanotube–polymer interactions in nanocomposites: a review. Compos Sci Technol2011; 72: 72–84.
31.
AwadSAFellowsCMMahiniSS. Effects of accelerated weathering on the chemical, mechanical, thermal and morphological properties of an epoxy/multi-walled carbon nanotube composite. Polym Test2018; 66: 70–77.
32.
DeborahMJawaharAMathavanT, et al.Spectroscopic studies on sidewall carboxylic acid functionalization of multi-walled carbon nanotubes with valine. Spectrochim Acta Part A2015; 139: 138–144.
33.
MailhotBMorlat-ThériasSOuahiouneM, et al.Study of the degradation of an epoxy/amine resin, 1. Macromol Chem Phys2005; 206: 575–584.
34.
AwadSAFellowsCMMahiniSS. A comparative study of accelerated weathering of epoxy resins based on DGEBA and HDGEBA. J Polym Res2018; 25: 103.
35.
AllenNSEdgeM. Fundamentals of polymer degradation and stabilization, New York: Springer Science & Business Media, 1992.
36.
ShanmugamNHusseinIABadghaishA, et al.Evaluation of oil fly ash as a light stabilizer for epoxy composites: accelerated weathering study. Polym Degrad Stab2015; 112: 94–103.
37.
NikafsharSZabihiOAhmadiM, et al.The effects of UV light on the chemical and mechanical properties of a transparent epoxy-diamine system in the presence of an organic UV absorber. Materials2017; 10: 180.
38.
NagendiranSAlagarMHamertonI. Octasilsesquioxane-reinforced DGEBA and TGDDM epoxy nanocomposites: characterization of thermal, dielectric and morphological properties. Acta Mater2010; 58: 3345–3356.
39.
HillLWKorzeniowskiHMOjunga-AndrewM, et al.Accelerated clearcoat weathering studied by dynamic mechanical analysis. Prog Organ Coat1994; 24: 147–173.
