The aim of this study is to investigate and optimize the performance of a promising biopolymer, poly (3-hydroxybutyrate-co-3-hydroxyvalerate) which can potentially replace non-biodegradable synthetic polymers derived from toxic petroleum products. Poly (3-hydroxybutyrate-co-3-hydroxyvalerate) biofilms were prepared using solvent casting method, and its thermal properties were determined using thermogravimetric and differential scanning calorimetry techniques. Also, the durability and biodegradability of these films were studied by keeping the samples in water and Alabama soil conditions for various lengths of time. Our results showed that the thermal and moisture resistance of poly (3-hydroxybutyrate-co-3-hydroxyvalerate) biopolymer can be enhanced significantly with the addition of low halloysite nanotubes concentrations. Also, the biodegradation process of the poly (3-hydroxybutyrate-co-3-hydroxyvalerate) films was faster with the addition of halloysite nanotubes attributed to the accelerated microbial microorganism reaction in the soil. This study led to cognize that the PHBV biopolymers added with halloysite nanotubes can be successfully used for various biomedical, industrial and structural applications, and then decompose at a desired faster rate afterward.
LiuZErhanSZAkinDEet al.“Green” composites from renewable resources: preparation of epoxidized soybean oil and flax fiber composites. J Agric Food Chem2006; 54: 2134–2137.
2.
WangSSongCChenGet al.Characteristics and biodegradation properties of poly(3hydroxybutyrate-co-3-hydroxyvalerate)/organophilic montmorillonite (PHBV/OMMT) nanocomposite. Polym Degrad Stab2005; 87: 69–76.
3.
CheaVAngellier-CoussyHPeyronSet al.Poly (3-hydroxybutyrate-co-3-hydroxyvalerate) films for food packaging: physical–chemical and structural stability under food contact conditions. J Appl Polym Sci2016; 133: 1–8. DOI: 10.1002/APP.41850.
4.
MallickP. Fiber-reinforced composites: materials, manufacturing, and design, 3rd ed. New York: CRC Press, 2007, pp. 6–27.
5.
AlhuthaliAMLowIM. Influence of halloysite nanotubes on physical and mechanical properties of cellulose fibres reinforced vinyl ester composites. J Reinf Plast Compos2012; 32: 1–15.
6.
RoojSDasAThakurVet al.Preparation and properties of natural nanocomposites based on natural rubber and naturally occurring halloysite nanotubes. Mater Des2010; 31: 2151–2156.
7.
ZainuddinSFahimAShoiebSet al.Morphological and mechanical behavior of chemically treated jute-PHBV bio-nanocomposites reinforced with silane grafted halloysite nanotubes. J App Polym Sci2016; 133: 43994–43994.
8.
GuimaraesLEnyashinANSeifertGet al.Structural, electronic, and mechanical properties of single-walled halloysite nanotube models. J Phys Chem C2010; 114: 11358–11363.
9.
KohHCParkJSJeongMAet al.Preparation and gas permeation properties of biodegradable polymer/layered silicate nanocomposite membranes. Desalination2008; 233: 201–209.
10.
YuanPSouthonPDLiuZWet al.Functionalization of halloysite clay nanotubes by grafting with gamma-aminopropyltriethoxysilane. J Phys Chem C2008; 112: 15742–15751.
GorrasiGTortoraMVittoriaVet al.Barrier properties of polymer/clay nanocomposites. J Polym Sci Part B Polym Phys2002; 40: 18–24.
16.
FukushimaKAbbateCTabuaniDet al.Biodegradation of poly(lactic acid) and its nanocomposites. Polym Degrad Stab2009; 94: 1646–1655.
17.
CarliLNCrespoJSMaulerRS. PHBV nanocomposites based on organomodified montmorillonite and halloysite: the effect of clay type on the morphology and thermal and mechanical properties. Compos: Part A2011; 42: 1601–1608.
18.
Harun-or-RashidMDSaifur RahamanMDKabirSEet al.Effect of hydrochloric acid on the properties of biodegradable packaging materials of carboxymethylcellulose/poly(vinyl alcohol) blends. J Appl Polym Sci2016; 133: 42870–42870.
19.
DuMGuoBJiaD. Newly emerging applications of halloysite nanotubes: a review. Polym Int2010; 59: 574–582.
20.
GaazTSSulongABAkhtarMNet al.Properties and applications of polyvinyl alcohol, halloysite nanotubes and their nanocomposites. Molecules2015; 20: 22833–22847.
21.
WangSSongCChenGet al.Characteristics and biodegradation properties of poly(3-hydroxybutyrate-co-3-hydroxyvalerate)/ organophilic montmorillonite (PHBV/OMMT) nanocomposite. Polym Degrad Stab2005; 87: 69–76.
22.
BotanaAMolloMEisenbergPet al.Effect of modified montmorillonite on biodegradable PHB nanocomposites. Appl Clay Sci2010; 47: 263–270.
23.
LiuMGuoBDuMet al.Drying induced aggregation of halloysite nanotubes in polyvinyl alcohol/halloysite nanotubes solution and its effect on properties of composite film. Appl Phys A Mater Sci Process2007; 88: 391–395.
24.
De RosaIMKennyJMManiruzzamanMet al.Effect of chemical treatments on the mechanical and thermal behaviour of okra (Abelmoschus esculentus) fibres. Compos Sci Technol2011; 71: 246–254.
25.
DuMGuoBJiaD. Thermal stability and flame retardant effects of halloysite nanotubes on poly(propylene). Eur Polym J2006; 42: 1362–1369.
26.
RahmanNAHassanAYahyaRet al.Micro-structural, thermal, and mechanical properties of injection molded glass fiber/nanoclay/polypropylene composites. J Reinf Plast Compos2012; 31: 269–281.
27.
IsmailHPasbakhshPFauziMNAet al.Morphological, thermal and tensile properties of halloysite nanotubes filled ethylene propylene diene monomer (EPDM) nanocomposites. Polym Test2008; 27: 841–850.
DhakalHNZhangZYRichardsonMOW. Effect of water absorption on the mechanical properties of hemp fibre reinforced unsaturated polyester composites. Compos Sci Technol2007; 67: 1674–1683.
MergaertJWebbAAndersonCet al.Microbial degradation of poly(3-hydroxybutyrate) and poly(3-hydroxybutyrate-co-3-hydroxyvalerate) in soils. App Environ Microbiol1993; 59: 3233–3238.
33.
MaitiPBattCAGiannelisEP. New biodegradable polyhydroxybutyrate/ layered silicate nanocomposites. Biomacromolecules2007; 8: 3393–400.
34.
ZuhairJAmerASaeedAQ. Soil burial degradation of polypropylene/starch blend. Int J Tech Res Appl2015; 3: 91–96.
