Natural fibres are generally added to polymer matrix composites to produce materials with the desirable mechanical properties of higher specific strength and higher specific modulus while at the same time to maintain a low density and low cost. The physical and mechanical properties of polymer composites can be enhanced through the addition of nanofillers such as halloysite nanotubes. This article describes the fabrication of vinyl ester eco-composites and eco-nanocomposites and characterizes these samples in terms of water absorption, mechanical and thermal properties. Weight gain test and Fourier transform infrared analysis indicated that 5% halloysite nanotube addition gave favourable reduction in the water absorption and increased the fibre–matrix adhesion leading to improved strength properties in the eco-nanocomposites. However, halloysite nanotube addition resulted in reduced toughness but improved thermal stability.
HandgeUAHedicke-HöchstötterKAltstädtV. Composites of polyamide 6 and silicate nanotubes of the mineral halloysite: influence of molecular weight on thermal, mechanical and rheological properties. Polymer2010; 51(12): 2690–2699.
4.
RoojSDasAThakurV. Preparation and properties of natural nanocomposites based on natural rubber and naturally occurring halloysite nanotubes. Mater Des2010; 31(4): 2151–2156.
AroraSKumarMKumarM. Flammability and thermal degradation studies of PVA/rice husk composites. J Reinf Plast Compos2012; 31(2): 85–93.
7.
OsorioLTrujilloEVan VuureAW. Morphological aspects and mechanical properties of single bamboo fibers and flexural characterization of bamboo/epoxy composites. J Reinf Plast Compos2011; 30(5): 396–408.
8.
AnuarHZuraidaA. Improvement in mechanical properties of reinforced thermoplastic elastomer composite with kenaf bast fibre. Composites Part B2011; 42(3): 462–465.
9.
GrishchukSCastellàNApostolovAA. Structure and properties of vinyl ester resins modified with organophilic synthetic layered silicates bearing non- and co-reactive intercalants. J Compos Mater2012; 46: 941–947.
10.
KuHWangHPattarachaiyakoopN. A review on the tensile properties of natural fiber reinforced polymer composites. Composites Part B2011; 42(4): 856–873.
11.
HossainMKDewanMWHosurM. Mechanical performances of surface modified jute fiber reinforced biopol nanophased green composites. Composites Part B2011; 42(6): 1701–1707.
12.
DhakalHNZhangZYRichardsonMOW. Effect of water absorption on the mechanical properties of hemp fibre reinforced unsaturated polyester composites. Compos Sci Technol2007; 67(7–8): 1674–1683.
13.
LowIMSomersJKhoHS. Fabrication and properties of recycled cellulose fibre-reinforced epoxy composites. Compos Interfaces2009; 16(7–9): 659–669.
14.
LowIMMcGrathMLawrenceD. Mechanical and fracture properties of cellulose-fibre-reinforced epoxy laminates. Composites Part A2007; 38(3): 963–974.
15.
JoussenEPetitSChurchmanJ. Halloysite clay minerals: a review. Clay Miner2005; 40(4): 383–426.
16.
De RosaIMKennyJMManiruzzamanM. Effect of chemical treatments on the mechanical and thermal behaviour of okra (Abelmoschus esculentus) fibres. Compos Sci Technol2011; 71(2): 246–254.
17.
DengSZhangJYeL. Toughening epoxies with halloysite nanotubes. Polymer2008; 49(23): 5119–5127.
18.
LadhariABen DalyHBelhadjsalahH. Investigation of water absorption in clay-reinforced polypropylene nanocomposites. Polym Degrad Stab2010; 95(4): 429–439.
JinhuaWXiangZBingZ. Rapid adsorption of Cr (VI) on modified halloysite nanotubes. Desalination2010; 259(1–3): 22–28.
23.
SultaniaMYadawSBRaiJSP. Laminates based on vinyl ester resin and glass fabric: a study on the thermal, mechanical and morphological characteristics. Mater Sci Eng A2010; 527(18–19): 4560–4570.
24.
JebraneMSèbeG. A new process for the esterification of wood by reaction with vinyl esters. Carbohydr Polym2008; 72(4): 657–663.
25.
ScottTFCookWDForsytheJS. Kinetics and network structure of thermally cured vinyl ester resins. Eur Polym J2002; 38(4): 705–716.
26.
LasagabásterAAbadMJBarralL. Application of FTIR spectroscopy to determine transport properties and water–polymer interactions in polypropylene (PP)/poly(ethylene-co-vinyl alcohol) (EVOH) blend films: effect of poly(ethylene-co-vinyl alcohol) content and water activity. Polymer2009; 50(13): 2981–2989.
27.
GuoQChengBKortschotM. Performance of long Canadian natural fibers as reinforcements in polymers. J Reinf Plast Compos2010; 29(21): 3197–3207.
28.
ChenHMiaoMDingX. Influence of moisture absorption on the interfacial strength of bamboo/vinyl ester composites. Composites Part A2009; 40(12): 2013–2019.
29.
AlhuthaliALowIMDongC. Characterisation of the water absorption, mechanical and thermal properties of recycled cellulose fibre reinforced vinyl-ester eco-nanocomposites. Composites Part B2012; 43(7): 2772–2781.
30.
BaxBMüssigJ. Impact and tensile properties of PLA/Cordenka and PLA/flax composites. Compos Sci Technol2008; 68(7–8): 1601–1607.
31.
KimHJSeoDW. Effect of water absorption fatigue on mechanical properties of sisal textile-reinforced composites. Int J Fatigue2006; 28(10): 1307–1314.
32.
FaccaAGKortschotMTYanN. Predicting the elastic modulus of natural fibre reinforced thermoplastics. Composites Part A2006; 37(10): 1660–1671.
33.
ZuiderduinWCJWestzaanCHuétinkJ. Toughening of polypropylene with calcium carbonate particles. Polymer2003; 44(1): 261–275.
34.
StocchiABernalCVázquezA. A silicone treatment compared to traditional natural fiber treatments: effect on the mechanical and viscoelastic properties of jute—vinylester laminates. J Compos Mater2007; 41(16): 2005–2024.
35.
DengSTangY. Increasing load-bearing capacity of wood-plastic composites by sandwiching natural and glass fabrics. J Reinf Plast Compos2010; 29(20): 3133–3148.
36.
ChandradassJRamesh KumarMVelmuruganR. Effect of clay dispersion on mechanical, thermal and vibration properties of glass fiber-reinforced vinyl ester composites. J Reinf Plast Compos2008; 27(15): 1585–1601.
37.
AvilésFCauich-RodríguezJVRodríguez-GonzálezJA. Oxidation and silanization of MWCNTs for MWCNT/vinyl ester composites. eXPRESS Polym Lett2011; 5(9): 766–776.
38.
SunL-HYangZ-GLiX-H. Tensile and tribological properties of PTFE and nanoparticles modified epoxy-based polyester fabric composites. Mater Sci Eng A2008; 497(1–2): 487–494.
39.
FuS-YFengX-QLaukeB. Effects of particle size, particle/matrix interface adhesion and particle loading on mechanical properties of particulate–polymer composites. Composites Part B2008; 39(6): 933–961.
40.
ASTM D 2734-94. Standard methods for void content of reinforced specimen plastics , West Conshohocken, PA: American Society for Testing and Materials, 1997.
