Sage Journals: Discover world-class research

Abstract

A processing route is presented to manufacture discontinuous carbon fibre-reinforced polypropylene composites, using much longer fibre lengths (25 mm) and higher volume fractions (up to 45%) than previously reported in the literature. Carbon fibre tows are coated with different ratios of polypropylene, blended with a maleic anhydride coupling agent, to investigate the influence of the interfacial shear strength at the microscale on the macroscale composite properties. Improvements in the tensile performance at the macroscale (70% increase) are not as high as those reported for the interfacial shear strength at the microscale (300%), following the addition of the coupling agent. Consequently, the tensile strength of the carbon fibre-reinforced polypropylene material is only 45% of values reported for carbon fibre/epoxy systems, however, the tensile stiffness is comparable. This demonstrates the potential for using carbon fibre-reinforced polypropylene for structural applications, following further process optimisation to overcome the current high levels of porosity (3.3% at 0.45V_f) to improve the tensile strength.

Keywords

Compression moulding discontinuous fibres thermoplastic carbon fibre

Get full access to this article

View all access options for this article.

References

Henning

Ernst

Brüssel

. LFTs for automotive applications. Reinf Plast 2005; 49: 24–33.

Krause

Henning

Tröster

et al.

LFT-D—a process technology for large scale production of fiber reinforced thermoplastic components. J Thermoplast Compos Mater 2003; 16: 289–302.

Harper

Turner

Warrior

et al.

Characterisation of random carbon fibre composites from a directed fibre preforming process: the effect of tow filamentisation. Compos Part A: Appl Sci Manuf 2007; 38: 755–770.

Chavka NG and Dahl JS. P4 preforming technology: Process development utilizing carbon fiber roving. In: National Educators' Workshop; update 2001 standard experiments in engineering materials science and technology, Maryland, USA, 14–17 October 2001.

van Hattum

FWJ

Nunes

Bernardo

. A theoretical and experimental study of new towpreg-based long fibre thermoplastic composites. Compos Part A: Appl Sci Manuf 2005; 36: 25–32.

Evans

Qian

Turner

et al.

Flow characteristics of carbon fibre moulding compounds. Compos Part A: Appl Sci Manuf 2016; 90: 1–12.

Jansz

Polypropylene in automotive applications. In: Karger-Kocsis

(ed). Polypropylene: an A-Z reference, Netherlands: Springer, 1999, pp. 643–651.

Smock D. Polypropylene price forecast for 2015, http://www.mypurchasingcenter.com/commodities/commodities-articles/polypropylene-price-forecast-2015/ (accessed 3 December 2014).

Vaidya

Chawla

. Processing of fibre reinforced thermoplastic composites. Int Mater Rev 2008; 53: 185–218.

10.

Thomason

Vlug

Schipper

et al.

Influence of fibre length and concentration on the properties of glass fibre-reinforced polypropylene: Part 3. Strength and strain at failure. Compos Part A: Appl Sci Manuf 1996; 27: 1075–1084.

11.

Thomason

Vlug

. Influence of fibre length and concentration on the properties of glass fibre-reinforced polypropylene: 1. Tensile and flexural modulus. Compos Part A 1996; 27A: 477–484.

12.

Burn

Harper

Johnson

et al.

The usability of recycled carbon fibres in short fibre thermoplastics: interfacial properties. J Mater Sci 2016; 51: 7699–7715.

13.

Wong

Syed Mohammed

Pickering

et al.

Effect of coupling agents on reinforcing potential of recycled carbon fibre for polypropylene composite. Compos Sci Technol 2012; 72: 835–844.

14.

Luchoo

Harper

Bond

et al.

Net shape spray deposition for compression moulding of discontinuous fibre composites for high performance applications. Plastics Rubber Compos 2010; 39: 216–231.

15.

Chen

J-C

Chao

C-G

. Numerical simulation and experimental investigation for design of a carbon fiber tow pneumatic spreading system. Carbon 2005; 43: 2514–2529.

16.

Irfan

Machavaram

Mahendran

et al.

Lateral spreading of a fiber bundle via mechanical means. J Compos Mater 2012; 46: 311–330.

17.

Miller

Wei

Gibson

. Manufacture of polyphenylene sulfide (PPS) matrix composites via the powder impregnation route. Compos Part A: Appl Sci Manuf 1996; 27: 49–56.

18.

Iyer

Drzal

. Manufacture of powder-impregnated thermoplastic composites. J Thermoplast Compos Mater 1990; 3: 325–355.

19.

SABIC PP 576P – PP homopolymer for injection moulding, http://plasticker.de/recybase/docs/25922_1496827810.pdf (accessed 28 June 2017).

20.

Specialist Polymers from Eastman Chemical Company, http://www.jianqintrade.com/u/bc0bcb18-1980-4e93-b765-842ba6e86b48/file/636088565831854608.pdf (accessed 28 June 2017).

21.

Eastman Technical Data Sheet - Eastman G-3015 Polymer, http://ws.eastman.com/ProductCatalogApps/PageControllers/ProdDatasheet_PC.aspx?Product=71015384&sCategoryName=Generic#_ga=2.172567392.218370775.1498766276-1229859579.1494496440 (accessed 28 June 2017).

22.

TORAYCA – Technical Data Sheet No. CFA-005, http://www.toraycfa.com/pdfs/T700SDataSheet.pdf (accessed 28 June 2017).

23.

Van Hattum

Nunes

Bernardo

. A theoretical and experimental study of new towpreg-based long fibre thermoplastic composites. Compos Part A: Appl Sci Manuf 2005; 36: 25–32.

24.

Gupta

Mittal

Sharma

et al.

Some studies on glass fiber-reinforced polypropylene. Part II: Mechanical properties and their dependence on fiber length, interfacial adhesion, and fiber dispersion. Polym Compos 1989; 10: 16–27.

25.

Rijsdijk

Contant

Peijs

. Continuous-glass-fibre-reinforced polypropylene composites: I. Influence of maleic-anhydride-modified polypropylene on mechanical properties. Compos Sci Technol 1993; 48: 161–172.

26.

Unterweger

Duchoslav

Stifter

et al.

Characterization of carbon fiber surfaces and their impact on the mechanical properties of short carbon fiber reinforced polypropylene composites. Compos Sci Technol 2015; 108: 41–47.

27.

Rozman

Tay

Kumar

et al.

Polypropylene–oil palm empty fruit bunch–glass fibre hybrid composites: a preliminary study on the flexural and tensile properties. Eur Polym J 2001; 37: 1283–1291.

28.

Sanadi

Caulfield

Jacobson

et al.

Renewable agricultural fibers as reinforcing fillers in plastics: mechanical properties of kenaf fiber-polypropylene composites. Industrial Eng Chem Res 1995; 34: 1889–1896.

29.

Lindhagen

Berglund

. Microscopical damage mechanisms in glass fiber reinforced polypropylene. J Appl Polym Sci 1998; 69: 1319–1327.

30.

Parlevliet

Bersee

Beukers

. Residual stresses in thermoplastic composites–a study of the literature. Part III: Effects of thermal residual stresses. Compos Part A: Appl Sci Manuf 2007; 38: 1581–1596.

31.

Subramanian

Senthilvelan

. Development and preliminary performance evaluation of discontinuous fibre reinforced thermoplastic leaf spring. Proc Inst Mech Eng Part L: J Mater Des Appl 2009; 223: 131–142.

32.

Cantwell

Morton

. The significance of damage and defects and their detection in composite materials: a review. J Strain Anal Eng Des 1992; 27: 29–42.

33.

Mukhopadhyay

Deopura

Alagiruswamy

. Interface behavior in polypropylene composites. J Thermoplast Compos Mater 2003; 16: 479–495.

34.

Thomason

Vlug

. Influence of fibre length and concentration on the properties of glass fibre-reinforced polypropylene: 4. Impact properties. Compos Part A: Appl Sci Manuf 1997; 28: 277–288.

35.

Qiu

Weng

. On the application of Mori-Tanaka's theory involving transversely isotropic spheroidal inclusions. Int J Eng Sci 1990; 28: 1121–1137.

36.

Harper

Turner

Warrior

et al.

Characterisation of random carbon fibre composites from a directed fibre preforming process: effect of fibre length. Compos Part A: Appl Sci Manuf 2006; 37: 1863–1878.

37.

Harper

Turner

Warrior

et al.

Characterisation of random carbon fibre composites from a directed fibre preforming process: the effect of tow filamentisation. Compos Part A: Appl Sci Manuf 2007; 38: 755–770.

38.

Harper

Ahmed

Felfel

et al.

Finite element modelling of the flexural performance of resorbable phosphate glass fibre reinforced PLA composite bone plates. J Mech Behav Biomed Mater 2012; 15: 13–23.

39.

EL-Dessouky

Lawrence

. Ultra-lightweight carbon fibre/thermoplastic composite material using spread tow technology. Compos Part B: Eng 2013; 50: 91–97.

40.

Bijsterbosch

Gaymans

. Polyamide 6—long glass fiber injection moldings. Polym Compos 1995; 16: 363–369.

41.

Lauke

Mäder

et al.

Fracture resistance of short-glass-fiber-reinforced and short-carbon-fiber-reinforced polypropylene under Charpy impact load and its dependence on processing. J Mater Process Technol 1999; 89: 501–507.

42.

Peters

. Handbook of composites, New York, USA: Springer Science & Business Media, 2013.

43.

Marston

Gabbitas

Adams

et al.

Failure characteristics in carbon/epoxy composite tows. Compos Part A: Appl Sci Manuf 1996; 27: 1183–1194.

44.

Goettler

. Mechanical property enhancement in short-fiber composites through the control of fiber orientation during fabrication. Polym Compos 1984; 5: 60–71.

45.

Potter

Wisnom

. A novel manufacturing method for aligned discontinuous fibre composites (High Performance-Discontinuous Fibre method). Compos Part A: Appl Sci Manuf 2014; 65: 175–185.

46.

Akonda

Lawrence

Weager

. Recycled carbon fibre-reinforced polypropylene thermoplastic composites. Compos Part A: Appl Sci Manuf 2012; 43: 79–86.

47.

van Hattum

van Breugel

. LFT: the future of reinforced thermoplastics? Reinf Plast 2001; 45: 42–44.

48.

Lee

N-J

Jang

. The effect of fibre content on the mechanical properties of glass fibre mat/polypropylene composites. Compos Part A: Appl Sci Manuf 1999; 30: 815–822.

49.

Hassan

Yahya

Yahaya

et al.

Tensile, impact and fiber length properties of injection-molded short and long glass fiber-reinforced polyamide 6, 6 composites. J Reinf Plast Compos 2004; 23: 969–986.

50.

Kirupanantham

. Characterisation of discontinuous carbon fibre preforms for automotive applications, Nottingham, UK: University of Nottingham, 2013.

51.

Harper

Turner

Warrior

et al.

Characterisation of random carbon fibre composites from a directed fibre preforming process: analysis of microstructural parameters. Compos Part A: Appl Sci Manuf 2006; 37: 2136–2147.

52.

S-Y

Lauke

Mäder

et al.

Tensile properties of short-glass-fiber-and short-carbon-fiber-reinforced polypropylene composites. Compos Part A: Appl Sci Manuf 2000; 31: 1117–1125.

53.

Botelho

Rezende

Lauke

. Mechanical behavior of carbon fiber reinforced polyamide composites. Compos Sci Technol 2003; 63: 1843–1855.

54.

Ozkan

Karsli

Aytac

et al.

Short carbon fiber reinforced polycarbonate composites: effects of different sizing materials. Compos Part B: Eng 2014; 62: 230–235.

55.

McDonnell

McGarvey

Rochford

et al.

Processing and mechanical properties evaluation of a commingled carbon-fibre/PA-12 composite. Compos Part A: Appl Sci Manuf 2001; 32: 925–932.

56.

Wakeman

Zingraff

Bourban

P-E

et al.

Stamp forming of carbon fibre/PA12 composites–a comparison of a reactive impregnation process and a commingled yarn system. Compos Sci Technol 2006; 66: 19–35.

57.

Wakeman

Rudd

. Compression molding of thermoplastic composites. Comprehens Compos Mater 2000; 2: 915–965.

58.

Wakeman

Rudd

Cain

et al.

Compression moulding of glass and polypropylene composites for optimised macro-and micro-mechanical properties. 4: Technology demonstrator—a door cassette structure. Compos Sci Technol 2000; 60: 1901–1918.

59.

Jacob

Starbuck

Fellers

et al.

Effect of fiber volume fraction, fiber length and fiber tow size on the energy absorption of chopped fiber-polymer composites. Polym Compos 2005; 26: 293–305.

60.

Güllü

Özdemir

. Experimental investigation of the effect of glass fibres on the mechanical properties of polypropylene (PP) and polyamide 6 (PA6) plastics. Mater Des 2006; 27: 316–323.

61.

Truckenmüller

Fritz

. Injection molding of long fiber-reinforced thermoplastics: a comparison of extruded and pultruded materials with direct addition of roving strands. Polym Eng Sci 1991; 31: 1316–1329.

62.

Denault

Vu-Khanh

Foster

. Tensile properties of injection molded long fiber thermoplastic composites. Polym Compos 1989; 10: 313–321.

63.

Templeton

. Strength predictions of injection molding compounds. J Reinf Plast Compos 1990; 9: 210–225.

64.

Johanson

Harper

Johnson

et al.

Heterogeneity of discontinuous carbon fibre composites: damage initiation captured by digital image correlation. Compos Part A: Appl Sci Manuf 2015; 68: 304–312.

65.

Rahmanian

Thean

Suraya

et al.

Carbon and glass hierarchical fibers: Influence of carbon nanotubes on tensile, flexural and impact properties of short fiber reinforced composites. Mater Des 2013; 43: 10–16.

66.

Eguémann N, Giger L, Masania K, et al. Processing of characterisation of carbon fibre reinforced PEEK with discontinuous architecture. In: 16th European conference on composite materials, Seville, Spain, 22–26 June 2014.

67.

Wen

Liu

et al.

Synergetic effect of epoxy resin and maleic anhydride grafted polypropylene on improving mechanical properties of polypropylene/short carbon fiber composites. Compos Part A: Appl Sci Manuf 2014; 67: 212–220.

68.

Karsli

Aytac

. Effects of maleated polypropylene on the morphology, thermal and mechanical properties of short carbon fiber reinforced polypropylene composites. Mater Des 2011; 32: 4069–4073.

69.

Bowland C. A formulation study of long fiber thermoplastic polypropylene (Part 2): the effects of coupling agent type and properties. In: SPE Automotive and Composites Division: 9th annual automotive composites conference and exhibition, Troy, Michigan, USA, 15–16 September 2009.

70.

Chaudhari

Reif

Geiger

et al.

E-coat sustainable long-fiber thermoplastic composites for structural automotive applications. Adv Thermoplast Compos 2008; 1: 208–222.

71.

Paesano

Cohee

Palmese

. Carbon-fiber reinforced thermoplastic materials for rigidizable space systems. J Thermoplast Compos Mater 2003; 16: 139–170.

72.

Piggott

Chuang

. Aligned short-fibre reinforced thermosets: experiments and analysis lend little support for established theory. Compos Sci Technol 1993; 48: 291–299.

73.

Edwards

Evans

. A method for the production of high quality aligned short fibre mats and their composites, Paris: ICCM-3, 1980, pp. 1620–1635.

74.

Such

Ward

Potter

. Aligned discontinuous fibre composites: a short history. J Multifunction Compos 2014; 2: 155–168.

75.

Stoeffler

Andjelic

Legros

et al.

Polyphenylene sulfide (PPS) composites reinforced with recycled carbon fiber. Compos Sci Technol 2013; 84: 65–71.

76.

Turner

Harper

Warrior

et al.

Low cost carbon-fibre based automotive body panel systems - a performance and manufacturing cost comparison. Proc Inst Mech Eng Part D J Automobile Eng 2008; 222: 53–64.

77.

Bowland C. A formulation study of long fiber thermoplastic polypropylene (Part 1): the effects of coupling agent, glass content & resin properties on the mechanical properties. In: SPE automotive and composites division: 8th annual automotive composites conference and exhibition, Troy, Michigan, USA 16–18 September 2008.

Long discontinuous carbon fibre/polypropylene composites for high volume structural applications

Abstract

Keywords

Get full access to this article

References