Evaluation of the effect of processing conditions on the impact properties of polypropylene-nano-CaCO 3 composites

Abstract

Processing variables are known to have a decisive influence on the impact properties of polypopylene-nano-CaCO₃ composites. Therefore, it becomes mandatory to evaluate the effect of extrusion conditions on composite impact resistance. In the present work, a response surface methodology was used to evaluate the effects of screw rotation speed, screw configuration, and nanoparticles content on the polypropylene impact properties. The concentration of the nano-CaCO₃ particles, the screw rotation speed, and the interaction between these entrance factors were the processing variables of greater influence on the impact properties of nano-CaCO₃/polypropylene composites. The increase of screw rotation speed led to a decrease in the impact resistance, while the increase of filler content promoted an increase of such property. However, the increase of nanoparticles content led to obtaining poor tensile properties. Therefore, the filler content has to be adjusted in order to improve the impact properties without significant loss of mechanical strength.

Keywords

Polypropylene nano-calcium carbonate particles response surface methodology processing conditions composites mechanical properties

Get full access to this article

View all access options for this article.

References

Yang

Sun

et al.

Morphology and mechanical properties of polypropylene/calcium carbonate composites. Mater Lett 2006; 60: 805–809.

Wan

Xie

et al.

Effects of nanoparticle treatment on the crystallization behavior and mechanical properties of polypropylene/calcium carbonate nanocomposites. J Appl Polym Sci 2006; 102: 3480–3488.

Huang

Lin

Cai

et al.

Physical and mechanical properties of nano-CaCO₃ composites modified with acrylic acid. Plast Rubber Compos 2004; 33: 343–352.

Eiras

Pessan

. Mechanical properties of polypropylene and calcium carbonate nanocomposites. Mater Res 2009; 12: 517–522.

Öksüz

Yildirim

. Effect of calcium carbonate on the mechanical and thermal properties of isotactic polypropylene/ethylene vinyl acetate blends. J Appl Polym Sci 2005; 96: 1126–1137.

Avella

Cosco

Di Lorenzo

. Influence of CaCO₃ nanoparticles shape on the thermal and crystallization behavior of isotactic polypropylene based nanocomposites. J Therm Anal Colorim 2005; 80: 131–136.

Sorrentino

Bernardini

Capozzoli

et al.

Nano/micro ternary composites based on PP, nanoclay and CaCO₃. J Appl Polym Sci 2009; 113: 3360–3367.

Zare

Garmabi

Sharif

. Optimization of mechanical properties of PP/nanoclay/CaCO₃ ternary nanocomposite using response surface methodology. J Appl Polym Sci 2011; 122: 3188–3200.

Tang

Zhang

et al.

Investigation into poly(propylene)/montmorillonite/calcium carbonate nanocomposites. Macromol Mater Eng 2004; 29: 191–197.

10.

Goodarzi

Monemian

Angaji

et al.

Improvement of thermal and fire properties of polypropylene. J Appl Polym Sci 2008; 110: 2971–2979.

11.

Fuad

MYA

Hanim

Zarina

et al.

Polypropylene/calcium carbonate nanocomposites—effects of processing techniques and maleated polypropylene and compatibilizers. Polym Express Lett 2010; 4: 611–620.

12.

Chan

et al.

Polypropylene/calcium carbonate nanocomposites. Polymer 2002; 43: 2891–2992.

13.

Dubnikova

Nizhegorodtseva

Lomakin

et al.

Preparation and characteristics of composites based on polypropylene and ultradispersed calcium carbonate. Polym Sci Ser A 2008; 50: 1214–1225.

14.

Weon

Gam

Boo

et al.

Impact-toughening mechanism of calcium carbonate reinforced polypropylene nanocomposite. J Appl Polym Sci 2006; 99: 3070–3076.

15.

Arencón

Velasco

. Fracture toughness of polypropylene-based particulate composites. Materials 2009; 2: 2046–2094.

16.

Yuan

Challa

VSA

Misra

RDK

. Nanoscale elastic-plastic deformation in clay-reinforced nanostructured materials: the response of phase and structural morphology. J Compos Mater 2014; 48: 385–405.

17.

Eiras

Pessan

. Influence of calcium carbonate nanoparticles on the crystallization of polypropylene. Mater Res 2009; 12: 523–527.

18.

Raju

Kumarappa

Gaitonde

. Study on effect of process parameters on tensile properties of groundnut shell-vinyl ester composites: analysis using design of experiments. Int J Mater Sci Eng 2015; 3: 193–207.

19.

Wang

Zeng

et al.

Study on the microstructure and mechanical properties of nano-CaCO₃/ABS composites. Solid State Phenom 2007; 121–123: 1459–1469.

20.

Shelesh-Nezhad

Orang

Motallebi

. Crystallization, shrinkage and mechanical characteristics of polypropylene/CaCO₃ nanocomposites. J Therm Compos Mater 2013; 26: 544–554.

21.

Sepet

Tarakcioglu

Misra

RDK

. Investigation of mechanical, thermal and surface properties of nanoclay/HDPE nanocomposites produced industrially by melt mixing approach. J Compos Mater 2016; 50: 3105–3116.

22.

Privitera

. Statistics for the behavioral sciences, 1st ed. USA: Sage Publications, Inc, 2012, pp. 2251–2251.

23.

Torman

VBL

Coster

Riboldi

. Normalidade de variáveis: métodos de verificação e comparação de alguns testes não paramétricos por simulação. Rev HCPA 2012; 32: 227–234.