The old concept of the effective stiffness of a 90-layer with intralaminar cracks is revisited performing 3-D FEM parametric analysis of symmetric and balanced laminates. It is shown, focusing on the effective transverse modulus, that the expected dependence of this property on composite elastic properties and laminate lay-up is very weak and follows very simple rules. Calculations show that the effective longitudinal modulus and Poisson’s ratio of the layer are not affected at all by intralaminar cracking. Simple fitting curve for effective transverse modulus change with normalized crack density is obtained from analysis of GF/EP cross-ply laminate. It is shown, comparing with FEM results and experimental data, that this expression can be used as a ‘master curve’ in laminate theory to predict macroscopic elastic property change with crack density in laminates with very different lay-ups and made of different unidirectional composites.
ParviziABaileyJE. On multiple transverse cracking in glass fibre epoxy cross-ply laminates. J Mater Sci1978; 13: 2131–2136.
2.
Jamison RD, Schulte K, Reifsnider KL, et al. Characterization and analysis of damage mechanisms in tension-tension fatigue of graphite/epoxy laminates. In: Wilkins DJ (ed.) Effects of defects in composite materials, ASTM STP 836, 1984, pp.21–55.
3.
AllenDHYoonC. Homogenization techniques for thermo-viscoelastic solids containing cracks. Int J Solids Struct1998; 35: 4035–4053.
4.
VarnaJ. Strategies for stiffness analysis of laminates with microdamage: combining average stress and crack face displacement based methods. ZAMM Z Angew Math Mech2015; 95(10): 1081–1097.
BerthelotJM. Transverse cracking and delamination in cross-ply glass-fiber and carbon-fiber reinforced plastic laminates: Static and fatigue loading. Appl Mech Rev2003; 56: 111–147.
7.
NairnJHuSMatrix microcracking. In: PipesRBTalrejaR (eds). Damage mechanics of composite materials, Composite Materials series, vol. 9. Elsevier, Amsterdam, 1994, pp. 187–243.
8.
SmithPAWoodJR. Poisson’s ratio as a damage parameter in the static tensile loading of simple cross-ply laminates. Compos Sci Technol1990; 38: 85–93.
9.
GarrettKWBaileyJE. Multiple transverse fracture in 90° cross-ply laminates of a glass fibre-reinforced polyester. J Mater Sci1977; 12: 157–168.
10.
PetersPWMChoutT-W. On Cross-ply cracking in glass and carbon fibre reinforced epoxy laminates. Composites1987; 18: 40–46.
11.
TsaiCLDanielIM. The behaviour of cracked cross-ply composite laminates under shear loading. Int J Sol Struct1992; 29: 3251–3267.
12.
TanSCNuismerRJ. A theory for progressive matrix cracking in composite laminates. J Comp Mater1989; 23: 1029–1047.
13.
HashinZ. Analysis of cracked laminates: a variational approach. Mech Mater1985; 4: 121–136.
14.
VarnaJBerglundLA. Multiple transverse cracking and stiffness reduction in cross-ply laminates. J Compos Technol Res JCTRER1991; 13: 97–106.
15.
VarnaJBerglundLA. Thermo-elastic properties of composite laminates with transverse cracks. J Compos Technol Res1994; 16: 77–87.
16.
GiannadakisKVarnaJ. Potential of a simple variational analysis in predicting shear modulus of laminates with cracks in 90-layers. J Compos Mater2014; 48: 1843–1856.
KaterelosDTGKrasnikovsAVarnaJ. Variational models for shear modulus of symmetric and balanced laminates with cracks in 90-layer. Int J Solids Struct2015; 71:169–179.
19.
McCartneyLNSchoeppnerGABeckerW. Comparison of models for transverse ply cracks in composite laminates. Comp Sci Technol2000; 60: 2347–2359.
20.
ZhangJFanJSoutisC. Analysis of multiple matrix cracking in [±θm/90n]s composite laminates. Part 1. In-plane stiffness properties. Composites1992; 23: 291–304.
21.
LundmarkPVarnaJ. Constitutive relationships for laminates with ply cracks in in-plane loading. Int J Damage Mech2005; 14: 235–261.
22.
LundmarkPVarnaJ. Crack face sliding effect on stiffness of laminates with ply cracks. Compos Sci Technol2006; 66: 1444–1454.
23.
LoukilMSVarnaJAyadiZ. Engineering expressions for thermo-elastic constants of laminates with high density of transverse cracks. Composites A2013; 48: 37–46.
24.
SmithPAOginSL. Characterization and modelling of matrix cracking in a (0/90)2s GFRP laminate loaded in flexure. Proc Math Phys Eng Sci2000; 456: 2755–2770.
25.
SmithPAOginSL. On transverse matrix cracking in cross-ply laminates loaded in simple bending. Compos Appl Sci Manuf1999; 30: 1003–1008.
26.
Pupurs A, Varna J, Loukil M, et al. Damage development and stiffness reduction in laminates in out of plane loading. In: Proceedings of 16th European conference on composite materials (ECCM), Seville, Spain, 22–26 June 2014.
27.
LoukilMSVarnaJAyadiZ. Applicability of solutions for periodic intralaminar crack distributions to non-uniformly damaged laminates. J Compos Mater2012; 47: 287–301.
28.
McCartneyLNSchoeppnerGA. Predicting the effect of non-uniform ply cracking on the thermo-elastic properties of cross-ply laminates. Compos Sci Technol2000; 62: 1841–1856.
29.
JoffeRVarnaJ. Analytical modeling of stiffness reduction in symmetric and balanced laminates due to cracks in 90° layers. Compos Sci Technol1999; 59: 1641–1652.
