Abstract
The vinylester resins were physically modified by 0.05 and 0.1 wt% nano polyvinyl alcohol fibers with about 80 nm in diameter prepared by electrospinning. Addition of nano polyvinyl alcohol fiber with 0.05–0.1 wt% improved the fracture toughness of vinylester resin slightly by ∼14.3%, while the carbon fiber/vinylester resin adhesion was almost unchanged. Then, carbon fiber/vinylester resin composites were fabricated by using modified vinylester resin as matrix and carbon fiber plain-woven fabrics as reinforcement. Low and high-cycle fatigue tests were conducted under the laboratory condition as well as static tensile tests. The tensile strength of carbon fiber/vinylester resin/polyvinyl alcohol composites increased slightly due to increased resistance to damage propagation at transverse bundles and resin-rich region. The fatigue properties of carbon fiber/vinylester resin composites were improved significantly by 3–50 times with the addition of no more than 0.1 wt% nano polyvinyl alcohol fibers. Due to the incorporation of nano filler, damage degree in carbon fiber/vinylester resin/polyvinyl alcohol composite was reduced at the fatigue initial stage based on thermoelastic stress damage analysis. Furthermore, a delay of delamination growth was found as well at the fatigue middle stage according to CT-scan and scanning electron microscopy investigation. The resistance to fatigue damage accumulation due to energy absorption by the addition of nano fiber contributed to fatigue life extension.
Keywords
Get full access to this article
View all access options for this article.