This paper presents an experimental and numerical investigation on low velocity impact response of S2 glass/epoxy and aramid/epoxy composite plates. Two different impact energy levels, 20 J and 30 J, were considered for impact tests. The commercial software called LS-DYNA was used in order to perform numerical simulations. The experimental and numerical results were found to be in good agreement.
Gama BA, Yarlagadda S and Kubota M. Low velocity impact and damage behavior of Kevlar bonded carbon/epoxy composites fabricated by near-IR irradiation. In: Composites 2006 Convention and Trade Show American Composites Manufacturers Association, 18–20 October 2006, St Luis, MO, USA.
10.
HosseinzadehRShokriehMMLessardL. Damage behavior of fiber reinforced composite plates subjected to drop weight impacts. Compos Sci Technol2006; 66: 61–68.
11.
WangXHuBFengY. Low velocity impact properties of 3D woven basalt/aramid hybrid composites. Compos Sci Technol2008; 68: 444–450.
12.
IctenBMAtasCAktasM. Low temperature effect on impact response of quasi-isotropic glass/epoxy laminated plates. Compos Struct2009; 91: 318–323.
13.
KarakuzuRErbilEAktasM. Impact characterization of glass/epoxy composite plates: an experimental and numerical study. Compos Part B2010; 41: 388–395.
14.
MennaCAsproneDCaprinoG. Numerical simulation of impact tests on GFRP composite laminates. Int J Impact Eng2011; 38: 677–685.
15.
Abu TalibARAbbudLHAliA. Ballistic impact performance of Kevlar-29 and Al2O3 powder/epoxy targets under high velocity impact. Mater Des2012; 35: 12–19.
16.
SevkatELiawBDelaleF. Drop-weight impact response of hybrid composites impacted by impactor of various geometries. Mater Des2013; 52: 67–77.
17.
MaioLMonacoERicciF. Simulation of low velocity impact on composite laminates with progressive failure analysis. Compos Struct2013; 103: 75–85.
18.
ChoiHYChangFK. A model for predicting damage on graphite/epoxy laminated composites resulting from low-velocity point impact. J Compos Mater1992; 26: 2l34–2169.
19.
TaraghiIFereidoonATaheri-BehroozF. Low-velocity impact response of woven Kevlar/epoxy laminated composites reinforced with multi-walled carbon nanotubes at ambient and low temperatures. Mater Des2014; 53: 152–158.
20.
Berk B, Karakuzu R, Icten BM, et al. Experimental and numerical impact analyses of composite plates subjected to low velocity impact. In: 22nd Annual international conference on composites/nano engineering (ICCE-22), 13–19 July 2014, Malta.
21.
HassanMANaderiSBushroaAR. Low-velocity impact damage of woven fabric composites: Finite element simulation and experimental verification. Mater Des2014; 53: 706–718.
22.
HeimbsSHellerSMiddendorfP. Low velocity impact on CFRP plates with compressive preload: test and modelling. Int J Impact Eng2009; 36: 1182–1193.
23.
GorenAAtasC. Manufacturing of polymer matrix composites using vacuum assisted resin infusion molding. Arch Mater Sci Eng2008; 34: 117–20.
