Greater concern for environmental safety and fuel economy has increased interest in the use of renewable resources for development of new materials. Wood–plastic composites, made of recycled plastic and wood wastes, are very attractive in this respect, making this one of the most dynamic areas of new developments in the plastics industry in the past decade. This paper presents the preparation and characterization of polypropylene-sawdust composites by compression molding using maleated polypropylene (MAPP) produced in Brazil by reactive extrusion, with different amounts of two types of peroxides. The MAPP was characterized for thermal properties, melt flow index, and chemical structure, while the composites containing both uncoated and MAPP-coated sawdust were characterized for mechanical properties to understand the effect of coating as well as to compare these properties with those of composites prepared with commercial MAPP. The MAPP was efficient as a compatabilizer for polypropylene/sawdust composites. Better impact and tensile properties were observed in composites prepared with medium and high melt flow index compatibilizer concentrations, respectively.
FengDCaulfieldDFSanadiAR. Effect of compatibilizer on the structure-property relationships of kenaf-fiber/polypropylene composites. Polym Compos2001; 22: 506–517.
2.
LinQZhouXDaiG. Some studies on mechanical properties of wood flour/continuous glass mat/polypropylene composite. J Appl Polym Sci2002; 85: 536–544.
3.
IslamMKhanMAAlamM. Study of water absorption behavior in wood plastic composites by using neutron radiography techniques. Polym-Plast Tech Eng2003; 42: 925–934.
ArbelaizAFernandezBRamosJ. Mechanical properties of short flax fibre bundle/polypropylene composites: influence of matrix/fibre modification, fibre content, water uptake and recycling. Compos Sci Technol2005; 65: 1582–1592.
6.
Rossi L. Wood plastic composites: Putting innovation on a faster track. In: Proceedings of the eighth international conference on wood fiber plastic composites, Madison, WI, 23--25 May 2005.
7.
SmithPMWolcottMP. Opportunities for wood/natural fiber-plastic composites in residential and industrial applications. Forest Prod J2006; 56: 4–11.
8.
RothlinO. Processing wood-plastic composites places new demands on feeders. Plast Addit Compos2007; 9: 36–39.
9.
KlyosovAA. Wood-plastic composites, Hoboken, NJ: John Wiley & Sons, 2007.
10.
WechslerAHizirogluS. Some of the properties of wood–plastic composites. Build Environ2007; 42: 2637–2644.
11.
KarmarkarAChauhanSModakJM. Mechanical properties of wood–fiber reinforced polypropylene composites: effect of a novel compatibilizer with isocyanate functional group. Compos A2007; 38: 227–233.
12.
KimH-SLeeB-HChoiS-W. The effect of types of maleic anhydride-grafted polypropylene (MAPP) on the interfacial adhesion properties of bio-flour-filled polypropylene composites. Compos A2007; 38: 1473–1482.
13.
ChowdhuryMJAWolcottMP. Compatibilizer selection to improve mechanical and moisture properties of extruded wood-HDPE composites. Forest Prod J2007; 57: 46–53.
14.
AdhikaryKBPangSStaigerMP. Long-term moisture absorption and thickness swelling behaviour of recycled thermoplastics reinforced with Pinus radiata sawdust. Chem Eng J2008; 142: 190–198.
15.
AdhikaryKBPangSStaigerMP. Dimensional stability and mechanical behaviour of wood–plastic composites based on recycled and virgin high-density polyethylene (HDPE). Compos B2008; 39: 807–815.
16.
BegMDHPickeringKL. Reprocessing of wood fibre reinforced polypropylene composites. Part I: effects on physical and mechanical properties. Compos A2008; 39: 1091–1100.
17.
AshoriA. Wood–plastic composites as promising green-composites for automotive industries!. Biores Technol2008; 99: 4661–4667.
18.
MigneaultSKoubaaAErchiquiF. Effects of processing method and fiber size on the structure and properties of wood–plastic composites. Compos A2009; 40: 80–85.
NourbakhshAAshoriA. Wood plastic composites from agro-waste materials: analysis of mechanical properties. BioRes Technol2010; 101: 2525–2528.
21.
BledzkiAKMamunAAVolkJ. Physical, chemical and surface properties of wheat husk, rye husk and soft wood and their polypropylene composites. Compos A2010; 41: 480–488.
22.
ThakurVKSinghaAS. Mechanical and water absorption properties of natural fibers/polymer biocomposites. Polym Plast Technol Eng2010; 49: 694–700.
23.
XieYXiaoZGrünebergT. Effects of chemical modification of wood particles with glutaraldehyde and 1,3-dimethylol-4, 5-dihydroxyethyleneurea on properties of the resulting polypropylene composites. Compos Sci Technol2010; 70: 2003–2011.
24.
DekaBKMajiT. Effect of coupling agent and nanoclay on properties of HDPE, LDPE, PP, PVC blend and Phargamites karka nanocomposite. Compos Sci Technol2010; 70: 1755–1761.
25.
VilaplanaFStrömbergEKarlssonS. Environmental and resource aspects of sustainable biocomposites. Polym Degrad Stab2010; 95: 2147–2161.
26.
ViksneABerzinaRAndersoneI. Study of plastic compounds containing polypropylene and wood derived fillers from waste of different origin. J Appl Polym Sci2010; 117: 368–377.
27.
ThompsonDWHansenENKnowlesC. Opportunities for wood plastic composite products in the U.S. highway construction sector. BioResources2010; 5: 1336–1352.
28.
LeiYWuQ. Wood plastic composites based on microfibrillar blends of high density polyethylene/poly(ethylene terephthalate). Biores Technol2010; 101: 3665–3671.
29.
Freitas LC. The low productivity and the waste in the process of improvement of wood: a case study. Master’s Thesis, Federal University of Santa Catarina, Florianópolis, Brazil, 2010.
30.
La MantiaFMorrealeM. Green composites: a brief review. Compos A2011; 42: 579–588.
31.
KimJKPalK. Recent advances in the processing of wood-plastic composites, Heidelberg: Springer Berlin, 2011, pp. 176–176.
32.
Mohd IdrusMAMHamdanSRezaur Rahman Md. Treated tropical wood sawdust-polypropylene polymer composite: mechanical and morphological study. J Biomater Nanobiotech2011; 2: 435–444.
33.
KordB. Influence of maleic anhydride on the flexural, tensile and impact characteristics of saw dust floor reinforced polypropylene composite. World Appl Sci J2011; 12: 1014–1016.
34.
AtuanyaCSolomonN. Evaluation of the mechanical properties of recycled polyethylene/iroko wood saw dust particulate composite. J Basic Appl Sci Res2011; 1: 2806–2810.
35.
NaghipourMNematzadehMYahyazadehQ. Analytical and experimental study on flexural performance of WPC–FRP beams. Constr Build Mater2011; 25: 829–837.
36.
EshraghiAKhademieslamHGhasemiI. Study the water absorption of hybrid wood plastic composites after accelerated weathering. J Basic Appl Sci Res2012; 2: 12560–12563.
37.
TabariHZRafieeFKhademi-EslamH. Thermo-chemical evaluation of wood plastic nanocomposites. Adv Mater Res2012; 463–464: 565–569.
38.
KelediGSudárABurgstallerC. Tensile and impact properties of three-component PP/wood/elastomer composites. Express Polym Lett2012; 6: 224–236.
39.
ThakurVKSinghaASThakurMK. Biopolymers based green composites: mechanical, thermal and physico-chemical characterization. J Polym Environ2012; 20: 412–421.
40.
GaoHXieYOuR. Grafting effects of polypropylene/polyethylene blends with maleic anhydride on the properties of the resulting wood–plastic composites. Compos A2012; 43: 150–157.
41.
BhaskarJHaqSPandeyA. Evaluation of properties of propylene-pine wood plastic composite. J Mater Environ Sci2012; 3: 605–612.
42.
BuyuksariUAyrilmisNAkbulutT. Compression wood as a source of reinforcing filler for thermoplastic composites. J Appl Polym Sci2012; 123: 1740–1745.
43.
NematiMKhademieslamHTalaiepourM. Investigation on the mechanical properties of nanocomposite based on wood flour/recycle polystyrene and nanoclay. J Basic Appl Sci Res2013; 3: 688–692.
44.
SudhakaraPKamala DeviAVenkata PrasadC. Thermal, mechanical, and morphological properties of maleated polypropylene compatibilized Borassus fruit fiber/polypropylene composites. J Appl Polym Sci2013; 128: 976–982.
45.
KazemiYCloutierARodrigueD. Mechanical and morphological properties of wood plastic composites based on municipal plastic waste. Polym Compos2013; 34: 487–493.
46.
LuoSJinzhenCWangX. Investigation of the interfacial compatibility of PEG and thermally modified wood flour/polypropylene composites using the stress relaxation approach. BioResources2013; 8: 2064–2073.
47.
NdiayeDGueyeMDiopB. Characterization, physical and mechanical properties of polypropylene/wood-flour composites. Arab J Sci Eng2013; 38: 59–68.
48.
PoostforushMAl-MamunMFasihiM. Investigation of physical and mechanical properties of high density polyethylene/wood flour composite foams. Res J Eng Sci2013; 2: 15–20.
49.
ZhouXYuYLinQ. Effects of maleic anhydride-grafted polypropylene (MAPP) on the physico-mechanical properties and rheological behavior of bamboo powder-polypropylene foamed composites. BioResources2013; 8: 6263–6279.
50.
ThakurVKSinghaASThakurMK. Synthesis of natural cellulose–based graft copolymers using methyl methacrylate as an efficient monomer. Adv Polym Technol2013; 32: E741–E748.
51.
ThakurVKThakurMKGuptaRK. Development of functionalized cellulosic biopolymers by graft copolymerization technique. Int J Biol Macromol2013; 62: 44–51.
52.
ThakurVK. Green composites from natural resources, USA: CRC Press/Taylor & Francis, 2013.
53.
FakhrulTMahbubRIslamMA. Properties of wood sawdust and wheat flour reinforced polypropylene composites. J Modern Sci Technol2013; 1: 135–148.
54.
YuanJHuYLiL. The mechanical strength change of wood modified with DMDHEU. BioResources2013; 8: 1076−1088–1076−1088.
55.
MalekaniMBazyarBTalaiepourM. Influence of maleic-anhydride-polypropylene (MAPP) on the physical properties of polypropylene/sawdust fir flour composite. J Appl Environ Biol Sci2014; 4: 340–343.
56.
LiuRPengYCaoJ. Water absorption, dimensional stability, and mold susceptibility of organically-modified-montmorillonite modified wood flour/polypropylene composites. BioResources2014; 9: 54–65.
57.
BaishyaPMajiTK. Studies on effects of different cross-linkers on the properties of starch-based wood composites. ACS Sustainable Chem Eng2014; 2: 1760−1768–1760−1768.
58.
ThakurVKThakurMK. Processing and characterization of natural cellulose fibers/thermoset polymer composites. Carbohydr Polym2014; 109: 102–117.
59.
ThakurVKThakurMKGuptaRK. Graft copolymers of natural fibers for green composites. Carbohyd Polym2014; 104: 87–93.
60.
ThakurVKVennerbergDKesslerMR. Green aqueous surface modification of polypropylene for novel polymer nanocomposites. ACS Appl Mater Interfaces2014; 6: 9349–9356.
61.
ThakurVKThakurMKGuptaRK. Raw natural fibers based polymer composites (review). Int J Polym Anal Char2014; 19: 256–271.
62.
ThakurVKThakurMKRaghavanP. Progress in green polymer composites from lignin for multifunctional applications: a review. ACS Sustain Chem Eng2014; 2: 1072–1092.
AziziHGhasemiI. Reactive extrusion of polypropylene: production of controlled-rheology polypropylene (CRPP) by peroxide-promoted degradation. Polym Test2004; 23: 137–143.
65.
ShiDYangJYaoZ. Functionalization of isotactic polypropylene with maleic anhydride by reactive extrusion: mechanism of melt grafting. Polymer2001; 42: 5549–5557.
66.
ClemonsCM. Wood-plastic composites in the United States: the interfacing of two industries. Forest Prod J2002; 52: 8–10.
67.
ABRAF. Annual statistical yearbook. Brasilia: Brazilian Association of Forest Plantation Producers, 2009.
SiyamakSIbrahimNAAbdolmohammadiS. Enhancement of mechanical and thermal properties of oil palm empty fruit bunch fiber poly (butylene adipate-co-terephtalate) biocomposites by matrix esterification using succinic anhydride. Molecules2012; 17: 1969–1991.
70.
PassagliaECoiaiSAugierS. Control of macromolecular architecture during the reactive functionalization in the melt of olefin polymers. Prog Polym Sci2009; 34: 911–947.
71.
RamakrishnaMKumarVNegiYS. Recent development in natural fiber reinforced polypropylene composites. J Reinf Plast Compos2009; 28: 1169–1189.
