This work investigates the mechanical and aging properties of flax/glass fibers reinforced polypropylene hybrid composites. The mechanical properties as a function of reinforcement content show that adding glass fiber to polypropylene/flax composites improves tensile modulus and strength as well as impact resistance and hardness, but has negligible effect on strain at yield and elongation at break. Water uptake at 85℃ and variations in mechanical behavior are determined after water, thermal, and accelerated UV aging tests. The results indicate that glass fibers enhance water resistance of polypropylene/flax composites. Thermal aging at 85℃ reveals that irrespective of filler type and content the composites are thermally resistant. According to accelerated UV aging tests, the presence of glass fiber accelerates the degradation of the polypropylene matrix, but flax fiber can protect the composites. Finally, a partial least-squares model is built to correlate the composite composition to the properties of aged and unaged specimens.
RajuGRatnamCTIbrahimNA. Enhancement of PVC/ENR blend properties by poly(methyl acrylate) grafted oil palm empty fruit bunch fiber. J Appl Polym Sci2008; 110: 368–375.
2.
SreekalaMSKumaranMGGeethakumariammaML. Environmental effects in oil palm fiber reinforced phenol formaldehyde composites: studies on thermal, biological, moisture and high energy radiation effects. Adv Compos Mater2004; 13: 171–197.
3.
Ghasemzadeh-BarvarzMRamezani-KakroodiARodrigueD. Multivariate image regression for quality control of natural fiber composites. Ind Eng Chem Res2013; 52: 12426–12436.
4.
SilvaRVAquinoEMFRodriguesLPS. Curaua/glass hybrid composite: the effect of water aging on the mechanical properties. J Reinf Plast Comp2009; 28: 1857–1868.
5.
LiYMaiY-WYeL. Sisal fibre and its composites: a review of recent developments. Compos Sci Technol2000; 60: 2037–2055.
6.
DavoodiMMSapuanSMAhmadD. Mechanical properties of hybrid kenaf/glass reinforced epoxy composite for passenger car bumper beam. Mater Des2010; 31: 4927–4932.
7.
KoradiyaSBPatelJPParsaniaPH. The preparation and physicochemical study of glass, jute and hybrid glass-jute bisphenol-C-based epoxy resin composites. Polym-Plast Technol2010; 49: 1445–1449.
8.
MishraSMohantyAKDrzalLT. Studies on mechanical performance of biofibre/glass reinforced polyester hybrid composites. Compos Sci Technol2003; 63: 1377–1385.
9.
KumarNMReddyGVNaiduSV. Mechanical properties of coir/glass fiber phenolic resin based composites. J Reinf Plast Comp2009; 28: 2605–2613.
10.
PatelVAParsaniaPH. Preparation and physico-chemical study of glass—sisal (treated—untreated) hybrid composites of bisphenol-C based mixed epoxy—phenolic resins. J Reinf Plast Comp2010; 29: 52–59.
SummerscalesJDissanayakeNVirkA. A review of bast fibres and their composites. Part 2 – composites. Compos Part A Appl Sci Manuf2010; 41: 1336–1344.
13.
FaccaAGKortschotMTYanN. Predicting the elastic modulus of natural fibre reinforced thermoplastics. Compos Part A Appl Sci Manuf2006; 37: 1660–1671.
14.
KalaprasadGThomasSPavithranC. Hybrid effect in the mechanical properties of short sisal/glass hybrid fiber reinforced low density polyethylene composites. J Reinf Plast Comp1996; 15: 48–73.
15.
KalaprasadGJosephKThomasS. Influence of short glass fiber addition on the mechanical properties of sisal reinforced low density polyethylene composites. J Compos Mater1997; 31: 509–527.
16.
KalaprasadGFrancisBThomasS. Effect of fibre length and chemical modifications on the tensile properties of intimately mixed short sisal/glass hybrid fibre reinforced low density polyethylene composites. Polym Int2004; 53: 1624–1638.
17.
HaneefaABinduPAravindI. Studies on tensile and flexural properties of short banana/glass hybrid fiber reinforced polystyrene composites. J Compos Mater2008; 42: 1471–1489.
18.
RozmanHDTayGSKumarRN. Polypropylene–oil palm empty fruit bunch–glass fibre hybrid composites: a preliminary study on the flexural and tensile properties. Eur Polym J2001; 37: 1283–1291.
19.
RozmanHDTayGSKumarRN. The effect of oil extraction of the oil palm empty fruit bunch on the mechanical properties of polypropylene–oil palm empty fruit bunch–glass fibre hybrid composites. Polym-Plast Technol2001; 40: 103–115.
20.
JarukumjornKSuppakarnN. Effect of glass fiber hybridization on properties of sisal fiber–polypropylene composites. Compos Part B Eng2009; 40: 623–627.
21.
NayakSKMohantyS. Sisal glass fiber reinforced PP hybrid composites: effect of MAPP on the dynamic mechanical and thermal properties. J Reinf Plast Comp2010; 29: 1551–1568.
22.
ThweMMLiaoK. Effects of environmental aging on the mechanical properties of bamboo–glass fiber reinforced polymer matrix hybrid composites. Compos Part A Appl Sci Manuf2002; 33: 43–52.
NayakSKMohantySSamalSK. Influence of short bamboo/glass fiber on the thermal, dynamic mechanical and rheological properties of polypropylene hybrid composites. Mater Sci Eng A2009; 523: 32–38.
25.
SamalSKMohantySNayakSK. Polypropylene–bamboo/glass fiber hybrid composites: fabrication and analysis of mechanical, morphological, thermal, and dynamic mechanical behavior. J Reinf Plast Comp2009; 28: 2729–2747.
26.
NayakSKMohantySSamalSK. Influence of interfacial adhesion on the structural and mechanical behavior of PP-banana/glass hybrid composites. Polym Compos2010; 31: 1247–1257.
27.
PanthapulakkalSSainM. Injection-molded short hemp fiber/glass fiber-reinforced polypropylene hybrid composites—mechanical, water absorption and thermal properties. J Appl Polym Sci2007; 103: 2432–2441.
28.
PanthapulakkalSSainM. Studies on the water absorption properties of short hemp–glass fiber hybrid polypropylene composites. J Compos Mater2007; 41: 1871–1883.
29.
BenevolenskiOIKarger-KocsisJMieckK-P. Instrumented perforation impact response of polypropylene composites with hybrid reinforcement flax/glass and flax/cellulose. J Thermoplast Compos2000; 13: 481–496.
30.
ArbelaizAFernándezBCanteroG. Mechanical properties of flax fibre/polypropylene composites. Influence of fibre/matrix modification and glass fibre hybridization. Compos Part A Appl Sci Manuf2005; 36: 1637–1644.
Bos H. The potential of flax fibres as reinforcement for composite materials. PhD Thesis, Technische Universiteit Eindhoven, Eindhoven, 2004.
39.
BaleyC. Analysis of the flax fibres tensile behaviour and analysis of the tensile stiffness increase. Compos Part A Appl Sci Manuf2002; 33: 939–948.
40.
BismarckAAranberri-AskargortaISpringerJ. Surface characterization of flax, hemp and cellulose fibers; Surface properties and the water uptake behavior. Polym Compos2002; 23: 872–894.
41.
StamboulisABaillieCAPeijsT. Effects of environmental conditions on mechanical and physical properties of flax fibers. Compos Part A Appl Sci Manuf2001; 32: 1105–1115.
42.
ZhouJLucasJP. The effects of a water environment on anomalous absorption behavior in graphite/epoxy composites. Compos Sci Technol1995; 53: 57–64.
43.
MoryeSSWoolRP. Mechanical properties of glass/flax hybrid composites based on a novel modified soybean oil matrix material. Polym Compos2005; 26: 407–416.
44.
LassilaLVJNohrströmTVallittuPK. The influence of short-term water storage on the flexural properties of unidirectional glass fiber-reinforced composites. Biomaterials2002; 23: 2221–2229.
45.
ShinojSPanigrahiSVisvanathanR. Water absorption pattern and dimensional stability of oil palm fiber–linear low density polyethylene composites. J Appl Polym Sci2010; 117: 1064–1075.
46.
EspertAVilaplanaFKarlssonS. Comparison of water absorption in natural cellulosic fibres from wood and one-year crops in polypropylene composites and its influence on their mechanical properties. Compos Part A Appl Sci Manuf2004; 35: 1267–1276.
47.
MishraSVermaJ. Effect of compatibilizers on water absorption kinetics of polypropylene/wood flour foamed composites. J Appl Polym Sci2006; 101: 2530–2537.
48.
KarmakerACHoffmannAHinrichsenG. Influence of water uptake on the mechanical properties of jute fiber-reinforced polypropylene. J Appl Polym Sci1994; 54: 1803–1807.
49.
FelixJMGatenholmP. The nature of adhesion in composites of modified cellulose fibers and polypropylene. J Appl Polym Sci1991; 42: 609–620.
50.
BegMDHPickeringKL. Accelerated weathering of unbleached and bleached Kraft wood fibre reinforced polypropylene composites. Polym Degrad Stabil2008; 93: 1939–1946.
51.
GassanJGutowskiVS. Effects of corona discharge and UV treatment on the properties of jute-fibre epoxy composites. Compos Sci Technol2000; 60: 2857–2863.
52.
HonDNSChangS-TFeistWC. Protection of wood surfaces against photooxidation. J Appl Polym Sci1985; 30: 1429–1448.
53.
RabelloMSWhiteJR. Photodegradation of talc-filled polypropylene. Polym Compos1996; 17: 691–704.
54.
GoelAChawlaKKVaidyaUK. Effect of UV exposure on the microstructure and mechanical properties of long fiber thermoplastic (LFT) composites. J Mater Sci2008; 43: 4423–4432.
55.
SeldénRNyströmBLångströmR. UV aging of poly(propylene)/wood-fiber composites. Polym Compos2004; 25: 543–553.
56.
MutekiKMacGregorJFUedaT. Rapid development of new polymer blends: the optimal selection of materials and blend ratios. Ind Eng Chem Res2006; 45: 4653–4660.
57.
MutekiKMacGregorJFUedaT. Mixture designs and models for the simultaneous selection of ingredients and their ratios. Chemometr Intell Lab2007; 86: 17–25.
58.
MutekiKMacGregorJF. Multi-block PLS modeling for L-shape data structures with applications to mixture modeling. Chemometr Intell Lab2007; 85: 186–194.
59.
DuchesneCMacGregorJF. Establishing multivariate specification regions for incoming materials. J Qual Technol2004; 36: 78–95.
60.
DuchesneCKourtiTMacGregorJF. Multivariate SPC for startups and grade transitions. AIChE J2002; 48: 2890–2901.
61.
DuchesneCMacGregorJF. Multivariate analysis and optimization of process variable trajectories for batch processes. Chemometr Intell Lab2000; 51: 125–137.
62.
GurdenSPWesterhuisJABroR. A comparison of multiway regression and scaling methods. Chemometr Intell Lab2001; 59: 121–136.
63.
WoldSSjöströmaMErikssonL. PLS-regression: a basic tool of chemometrics. Chemometr Intell Lab2001; 58: 109–130.
