Sage Journals: Discover world-class research

Abstract

Carbon nanotubes have emerged as potential reinforcements that can be used to engineer composites with tailored combinations of physical and mechanical properties. In the present study, an Al alloy-based nanostructured composite containing multiwalled carbon nanotubes (MWCNT) as a reinforcement phase has been synthesized by a combination of two novel processing techniques, which are cryomilling and spark plasma sintering. Scanning electron microscopy and quantitative image analysis have been performed to provide insight into the microstructural evolution and to verify the retention of the carbon nanotubes in the consolidated samples. Nanoindentation, microhardness, and tribological studies have been carried out to understand the effect of variation in MWCNT content and processing on the mechanical response of the consolidated nanocomposites. The characterization results affirm the retention of carbon nanotubes and varied improvement in mechanical properties in the nanocomposites. Raman spectroscopy analysis revealed that the MWCNTs were partially damaged during cryomilling.

Keywords

Al-based nanocomposite carbon nanotubes reinforcement cryomilling spark plasma sintering

Get full access to this article

View all access options for this article.

References

Scala

. A brief history of composites in the U.S. – The dream and the success. JOM 1996; 48: 45–48.

Pipes

Hubert

. Helical carbon nanotube arrays: mechanical properties. Compos Sci Technol 2002; 62: 419–428.

Zhang

Tendeloo

. Carbon nano-tubes; their formation process and observation by electron microscopy. J Cry Growth 1993; 130: 368–382.

Salvetat-Delmotte

Rubio

. Mechanical properties of carbon nanotubes: A fiber digest for beginners. Carbon 2002; 40: 1729–1734.

Baxendale

. The physics and applications of carbon nanotubes. J Mater Sci Mat Electronics 2003; 14: 657–660.

Lau

AKT

Hui

. The revolutionary creation of new advanced materials-carbon nanotube composites. Compos Part B Eng 2002; 33: 263–277.

Maser

Benito

Callejas

. Synthesis and characterization of new polyaniline/nanotube composites. Mater Sci Eng C 2003; 23: 87–91.

Wong

Paramsothy

. Interactions at carbon nanotube-polymer interface. Polymer 2003; 44: 7757–7764.

Szleifer

Yerushalmi-Rozen

. Polymers and carbon nanotubes dimensionality, interactions and nanotechnology. Polymer 2005; 46: 7803–7818.

10.

Desai

Haque

. Mechanics of the interface for carbon nanotube–polymer composites. Thin-Walled Struct 2005; 43: 1787–1803.

11.

Koerner

Price

Pearce

. Remotely actuated polymer nanocomposites--stress-recovery of carbon-nanotube-filled thermoplastic elastomers. Nat Mater 2004; 3: 115–120.

12.

Ajayan

Schadler

Giannaris

. Single-walled carbon nanotube-polymer composites: strength and weakness. Adv Mat 2000; 12: 750–753.

13.

Dong

Zhang

. Mechanical properties of Cu-based composites reinforced by carbon nanotubes. Trans Nonferrous Met Soc China 1999; 9: 457–461.

14.

Dong

Zhang

. An investigation of the sliding wear behaviour of Cu-matrix composite reinforced by carbon nanotubes. Mater Sci Eng A 2001; 313: 83–87.

15.

Zhang

Xue

. Study on properties of carbon nanotube/magnesium matrix composite. Mater Sci Forum 2005; 897: 488–489.

16.

Chen

Wang

. Tribological application of carbon nanotubes in a metal-based composite coating and composites. Carbon 2003; 41: 215–222.

17.

Chen

Xia

Peng

. Carbon-nanotube metal-matrix composites prepared by electroless plating. Compos Sci Technol 2000; 60: 301–306.

18.

Ganguly

Poole

. Characterization of reinforcement distribution inhomogeneity in metal matrix composites. Mater Sci Eng A 2002; 332: 301–310.

19.

Hammel

Tang

Trampert

. Carbon nanofibers for composite applications. Carbon 2004; 42: 1153–1158.

20.

Dieter

. Mechanical metallurgy, 3rd ed. London: McGraw-Hill Book Co, 1986, pp. 188–191.

21.

Kim

Lim

Kim

. Strengthening of copper matrix composites by nickel-coated single-walled carbon nanotube reinforcements. Synthetic Metal 2009; 159: 424–429.

22.

Laha

Agarwal

McKechnie

. Synthesis and characterization of plasma spray formed carbon nanotube reinforced aluminium composite. Mater Sci Eng A 2004; 381: 249–258.

23.

Deng

Wang

Zhang

. Processing and properties of carbon nanotubes reinforced aluminium composites. Mater Sci Eng A 2007; 444: 138–145.

24.

Kwon

Estili

Takagi

. Combination of hot extrusion and spark plasma sintering for producing carbon nanotube reinforced aluminium matrix composites. Carbon 2009; 47: 570–577.

25.

Orru

Licheri

Locci

. Consolidation/synthesis of materials by electric current activated/assisted sintering. Mater Sci Eng R 2009; 63: 127–287.

26.

Chen

Anselmi-Tamburini

Garay

. Fundamental investigations on the spark plasma sintering/synthesis process: I. Effect of DC pulsing on reactivity. Mater Sci Eng A 2005; 394: 132–138.

27.

Groza

Zavaliango

. Sintering activation by external electrical field. Mater Sci Eng A 2000; 287: 171–177.

28.

Hulbert

Anders

Andersson

. A discussion on the absence of plasma in spark plasma sintering. Scrip Mater 2009; 60: 835–838.

29.

Zhou

Lee

Dallek

. High grain size stability of nanocrystalline Al prepared by mechanical attrition. J Mater Res 2001; 16: 3451–3458.

30.

Zhou

Liao

Zhu

. Microstructural evolution during recovery and recrystallization of a nanocrystalline Al-Mg alloy prepared by cryogenic ball milling. Acta Mater 2003; 51: 2771–2791.

31.

Han

Lee

Witkin

. Deformation behavior of Bimodal nanostructured 5083 Al alloy. Metal Trans A 2005; 36: 957–965.

32.

Witkin

Lavernia

. Synthesis and mechanical behavior of nanostructured materials via cryomilling. Progress Mater Sci 2006; 51: 1–60.

33.

Liu

Ortalan

. HRTEM and EELS study of aluminum nitride in nanostructured Al 5083/B4C processed via cryomilling. Acta Mater 2010; 58: 1732–1740.

34.

Vogt

Zhang

. The absence of thermal expansion mismatch strengthening in nanostructured metal–matrix composites. Scripta Mater 2009; 61: 1052–1055.

35.

Lavernia

Han

Schoenung

. Cryomilled nanostructured materials: Processing and properties. Mater Sci Eng A 2008; 493: 207–214.

36.

Oliver

Pharr

. An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments. J Mater Res 1992; 7: 1564–1583.

37.

Bhushan

. A review of nanoindentation continuous stiffness measurement technique and its applications. Mater Character 2002; 48: 11–36.

38.

Ebbesen

. Wetting, filling and decorating carbon nanotubes. J Phys Chem Solids 1996; 57: 951–955.

39.

Ryu

Jin-Phillipp

. Investigation of the interfacial reaction between multi-walled carbon nanotubes and aluminium. Acta Mater 2006; 54: 5367–5375.

40.

German

. Sintering theory and practice, 1st ed. NY: Wiley-Interscience, 1996, pp. 244–258.

41.

Carter

. Ceramic materials, Springer, NY: Science and Engineering, 2007, pp. 427–33.

42.

Liao

Tan

Sridhar

. Spark plasma sintered multi-wall carbon nanotube reinforced aluminum matrix composites. Mater Des 2010; 31: S96–S100.

43.

Jiang

Fan

. An approach to the uniform dispersion of a high volume fraction of carbon nanotubes in aluminum powder. Carbon 2011; 49: 1965–1971.

44.

Esawi

Morsi

. Dispersion of carbon nanotubes (CNTs) in aluminum powder. Compos Part A 2007; 38: 646–650.

45.

Yoshio

Tatami

Yamakawa

. Dispersion of carbon nanotubes in ethanol by a bead milling process. Carbon 2011; 49: 4131–4137.

46.

Tucho

Mauroy

Walmsley

. The effects of ball milling intensity on morphology of multiwall carbon nanotubes. Scr Mater 2010; 63: 637–640.

47.

Ahn

Shin

Kim

. Structural modification of carbon nanotubes by various ball milling. J Alloys Com 2007; 428: 434–435.

48.

Zhang

Joshi

. Rate-dependent behavior of hierarchical Al matrix composites. Scripta Mater 2008; 59: 1139–1147.

49.

Inam

Yan

Peijs

. The sintering and grain growth behaviour of ceramic–carbon nanotube nanocomposites. Compos Sci Technol 2010; 70: 947–952.

50.

Sridhar

Narayanan

. Processing and characterization of MWCNT reinforced aluminium matrix composites. J Mater Sci 2009; 44: 1750–1756.

Carbon nanotube-reinforced Al alloy-based nanocomposites via spark plasma sintering

Abstract

Keywords

Get full access to this article

References