Multiwalled carbon nanotubes (MWCNTs) were modified to covalently attach the carboxylic moiety with their surfaces. Variant concentrations of functionalized multiwalled carbon nanotubes (F-MWCNTs) were introduced into polydimethylsiloxane (PDMS) adopting solution mixing technique. Fourier transform infrared spectroscopy (FTIR) confirms the carboxy functionalization presence on the surface of the nanotubes. X-ray diffraction (XRD) patterns for both MWCNTs and F-MWCNTs illustrate that the crystallinity does not alter with surface modification of the nanotubes. Experimental results simulated that electrical conductivity of the nanocomposites was augmented with increasing filler concentration in the host matrix. Thermal conductivity and thermal impedance of the nanocomposite specimens were evaluated according to developed methodologies and the accumulative data revealed the nanocomposites thermal transport dependence on the F-MWCNTs doping concentration in the host polymer matrix. Thermal stability enhancement with increasing filler incorporation into the polymer matrix was observed in thermogravimetric/differential thermal analyzer (TG/DTA) contours. Crystallization, glass transition, and melting temperatures were examined using differential scanning calorimeter (DSC) and it was observed that phase transition temperatures of the composite specimens can be tuned by varying the nanotubes to matrix ratio. Scanning electron microscopy and energy dispersive x-ray spectroscopy were carried out to analyze the surface morphology/composition of the fabricated nanocomposites and dispersion of functionalized and pristine MWCNTs in the polymer matrix.
Koo J, Venumbaka S, Weispfenning J, et al. Silicone matrix composites for thermal protection. Society for the Advancement of Material and Process Engineering, Advanced Materials & Processes: Preparing for the New Millenium (USA), 1999, pp.163–176.
4.
PrabuRRUsaSUdayakumarK. Electrical insulation characteristics of silicone and EPDM polymeric blends - Part I. IEEE Trans Dielectr Elect Insulat2007; 14: 1207–1214.
5.
Iqbal N, Khan MB, Sagar S, et al. Fabrication and characterization of multiwalled carbon nanotubes/silicone rubber composites. J Appl Polym Sci 2012; 128: 2439–3446.
6.
KimESKimEJLeeTH. Clay modification and its effect on the physical properties of silicone rubber/clay composites. J Appl Polym Sci2012; 125: E298–E304.
7.
IijimaS. Helical microtubules of graphitic carbon. Nature1991; 354: 56–58.
Amoli BM, Ramazani S and Izadi H. Preparation of ultrahigh-molecular-weight polyethylene/carbon nanotube nanocomposites with a Ziegler–Natta catalytic system and investigation of their thermal and mechanical properties. J Appl Polym Sci 2012; 125: E453–E461.
AtiehMA. Effect of functionalized carbon nanotubes with carboxylic functional group on the mechanical and thermal properties of styrene butadiene rubber. Fuller Nanotubes Carbon Nanostruct2011; 19: 617–627.
13.
DatsyukVKalyvaMPapagelisK. Chemical oxidation of multiwalled carbon nanotubes. Carbon2008; 46: 833–840.
14.
RoscaIDWatariFUoM. Oxidation of multiwalled carbon nanotubes by nitric acid. Carbon2005; 43: 3124–3131.
15.
VergePPeeterbroeckSBonnaudL. Investigation on the dispersion of carbon nanotubes in nitrile butadiene rubber: role of polymer-to-filler grafting reaction. Compos Sci Technol2010; 70: 1453–1459.
16.
ChenSYuHRenW. Thermal degradation behavior of hydrogenated nitrile-butadiene rubber (HNBR)/clay nanocomposite and HNBR/clay/carbon nanotubes nanocomposites. Thermochim Acta2009; 491: 103–108.
17.
MasarapuCHenryLWeiB. Specific heat of aligned multiwalled carbon nanotubes. Nanotechnology2005; 16: 1490–1490.
18.
PerezLDZuluagaMAKyuT. Preparation, characterization, and physical properties of multiwall carbon nanotube/elastomer composites. Polym Eng Sci2009; 49: 866–874.
19.
SeoBHChoYJYounJR. Model for thermal conductivities in spun yarn carbon fabric composites. Polym Compos2005; 26: 791–798.
20.
NasehMVKhodadadiAMortazaviY. Functionalization of carbon nanotubes using nitric acid oxidation and DBD plasma. World Acad Sci Eng Technol2009; 49: 177–179.
21.
XiaWJinCKunduS. A highly efficient gas-phase route for the oxygen functionalization of carbon nanotubes based on nitric acid vapor. Carbon2009; 47: 919–922.
22.
NairKPThomasPJosephR. Latex stage blending of multiwalled carbon nanotube in carboxylated acrylonitrile butadiene rubber: mechanical and electrical properties. Mater Des2012; 41: 23–30.
23.
IqbalNKhanMBSagarS. Fabrication and characterization of multiwalled carbon nanotubes/silicone rubber composites. J Appl Polym Sci2013; 128: 2439–2446.
24.
SolimanEMKandilUFTahaMMR. The significance of carbon nanotubes on styrene butadiene rubber (SBR) and SBR modified mortar. Mater Struct2012; 45: 803–816.
25.
XieXLMaiYWZhouXP. Dispersion and alignment of carbon nanotubes in polymer matrix: a review. Mater Sci Eng R Rep2005; 49: 89–112.
26.
SchroderABriquelLSaweM. Effect of MWCNT-dispersion in NBR-compounds. Kgk-Kautschuk Gummi Kunststoffe2011; 64: 42–47.
27.
AlievAELimaMHSilvermanEM. Thermal conductivity of multi-walled carbon nanotube sheets: radiation losses and quenching of phonon modes. Nanotechnology2010; 21: 035709–709.
28.
Iqbal N, Sagar S, Khan MB, et al. Elastomeric ablative nanocomposites used in hyperthermal environments. Polym Eng Sci 2014; 54: 255–263.
29.
HanZFinaA. Thermal conductivity of carbon nanotubes and their polymer nanocomposites: a review. Prog Polym Sci2011; 36: 914–944.
30.
Im H and Kim J. Effect of homogeneous Al (OH) 3 covered MWCNT addition on the thermal conductivity of Al 2 O 3/epoxy-terminated poly (dimethylsiloxane) composites. J Mater Sci 2012; 147: 6025–6033.
31.
Iqbal N, Sagar S, Bilal Khan M, et al. Aluminum silicate fibers impregnated acrylonitrile butadiene rubber composites: ablation, thermal transport/stability, and mechanical inspection. J Appl Polym Sci 2013; 130: 4392–4400.
32.
Iqbal N, Sagar S, Khan MB, et al. Ablation, thermal stability/transport and mechanical investigations of modified nanokaolinite impregnated acrylonitrile butadiene rubber composites. J Compos Mater 2013.
33.
PhamDC. Weighted effective medium approximations for conductivity of random composites. Int J Heat Mass Transf2008; 51: 3355–3361.
34.
SagarS, Iqbal N and Maqsood A. Multiwalled carbon nanotubes impregnated rubber nanocomposites: thermal transport/decomposition and differential scanning calorimetric study. J Reinfor Plast Compos 2014; 48(10): 1221–1231.
35.
SagarSIqbalNMaqsoodA. MWCNTS incorporated natural rubber composites: thermal insulation, phase transition and mechanical properties. IACSIT Int J Eng Technol2014; 6: 168–173.
36.
BalakrishnanASahaMC. Tensile fracture and thermal conductivity characterization of toughened epoxy/CNT nanocomposites. Mater Sci Eng A2011; 528: 906–913.
37.
De FalcoALamannaMGoyanesS. Thermomechanical behavior of SBR reinforced with nanotubes functionalized with polyvinylpyridine. Phys B Condensed Matter2012; 407: 3175–3177.
38.
Iqbal N, Sagar S and Khan MB. Comprehensive ablation characteristics of ceramic fibers impregnated rubber composites. Polym Eng Sci 2014; 6: 162–167.
39.
Wang J, Feng LJ, Lei A, et al. Thermal stability and mechanical properties of room temperature vulcanized silicone rubbers. J Appl Polym Sci 2012; 125: 505–511.
40.
SagarSIqbalNMaqsoodA. Thermogravimetric, differential scanning calorimetric and experimental thermal transport study of MWCNT/NBR nanocomposites. J Therm Anal Calorim2013; 114: 161–167.
41.
DollaseTSpiessHWGottliebM. Crystallization of PDMS: The effect of physical and chemical crosslinks. EPL (Europhys Lett)2007; 60: 390–390.
42.
YangJRoyC. A new method for DTA measurement of enthalpy change during the pyrolysis of rubbers. Thermochim Acta1996; 288: 155–168.
