Functionalized multiwall carbon nanotubes (MWCNTs)-reinforced copper (Cu) nanocomposites have been fabricated by the combination of ball milling and hot-press sintering methods. The functionalization was carried out in two levels under reflux condition. Characterization of the fabricated nanocomposites revealed that the functionalization plays an important role in enhancing the hardness and electrical properties of nanocomposites. Enhancements of up to ∼116% and ∼58% in microhardness compared to pure un-milled and milled Cu were observed by adding 1 wt.% functionalized MWCNTs. On the other hand, the electrical resistivity of nanocomposites increased by increasing MWCNT contents. It was found that improved control of the Cu and MWCNT interface also leads to enhance electrical properties. Based on the experiments, the results indicated that the amount of chemically bonded oxygen atoms affects the electrical resistivity of nanocomposites. Accordingly, the nanocomposite containing 1 wt.% MWCNTs with lower amount of functional groups has lower electrical resistivity.
IijimaS. Helical microtubules of graphitic carbon. Nature1991; 354: 56–8.
2.
Ajayan P and Zhou O. Applications of carbon nanotubes. In: Dresselhaus M, Dresselhaus G and Avouris P (eds) Carbon Nanotubes. Springer Berlin Heidelberg, 2001, 80: 391–425.
3.
PlaneixJMCoustelNCoqB. Application of carbon nanotubes as supports in heterogeneous catalysis. J Am Chem Soc1994; 116: 7935–7936.
EbbesenTLezecHHiuraH. Electrical conductivity of individual carbon nanotubes. Nature1996; 382: 54–56.
6.
RuoffRSLorentsDC. Mechanical and thermal properties of carbon nanotubes. Carbon1995; 33: 925–930.
7.
ColemanJNKhanUBlauWJ. Small but strong: A review of the mechanical properties of carbon nanotube–polymer composites. Carbon2006; 44: 1624–1652.
8.
BakshiSLahiriDAgarwalA. Carbon nanotube reinforced metal matrix composites; a review. Int Mater Rev2010; 55: 41–64.
9.
UddinSMMahmudTWolfC. Effect of size and shape of metal particles to improve hardness and electrical properties of carbon nanotube reinforced copper and copper alloy composites. Compos Sci Technol2010; 70: 2253–2257.
10.
BakshiSRAgarwalA. An analysis of the factors affecting strengthening in carbon nanotube reinforced aluminum composites. Carbon2011; 49: 533–544.
11.
DaoushWMLimBKMoCB. Electrical and mechanical properties of carbon nanotube reinforced copper nanocomposites fabricated by electroless deposition process. Mater Sci Eng A2009; 513–514: 247–253.
XueZWWangLDZhaoPT. Microstructures and tensile behavior of carbon nanotubes reinforced Cu matrix composites with molecular-level dispersion. Mater Des2012; 34: 298–301.
14.
WangFAraiSEndoM. Metallization of multi-walled carbon nanotubes with copper by an electroless deposition process. Electrochem Commun2004; 6: 1042–1044.
15.
XuCWuGLiuZ. Preparation of copper nanoparticles on carbon nanotubes by electroless plating method. Mater Res Bull2004; 39: 1499–1505.
16.
ChaSIKimKTArshadSN. Extraordinary strengthening effect of carbon nanotubes in metal-matrix nanocomposites processed by molecular-level mixing. Adv Mater2005; 17: 1377–1381.
17.
SinghalSKLalMSharmaI. Fabrication of copper matrix composites reinforced with carbon nanotubes using a combination of molecular-level-mixing and high energy ball milling. J Compos Mater2013; 47: 613–621.
18.
LimBHwangJLeeD. Fabrication processes and multi-functional applications of carbon nanotube nanocomposites. J Compos Mater2012; 46: 1731–1737.
19.
RoscaIDWatariFUoM. Oxidation of multiwalled carbon nanotubes by nitric acid. Carbon2005; 43: 3124–3131.
20.
NasehMVKhodadadiAAMortazaviY. Fast and clean functionalization of carbon nanotubes by dielectric barrier discharge plasma in air compared to acid treatment. Carbon2010; 48: 1369–1379.
21.
MaP-CSiddiquiNAMaromG. Dispersion and functionalization of carbon nanotubes for polymer-based nanocomposites: A review. Compos Part A Appl Sci Manuf2010; 41: 1345–1367.
22.
ParkMKimB-HKimS. Improved binding between copper and carbon nanotubes in a composite using oxygen-containing functional groups. Carbon2011; 49: 811–818.
23.
KimKTChaSIGemmingT. The role of interfacial oxygen atoms in the enhanced mechanical properties of carbon-nanotube-reinforced metal matrix nanocomposites. Small2008; 4: 1936–1940.
24.
CollinsPGBradleyKIshigamiM. Extreme oxygen sensitivity of electronic properties of carbon nanotubes. Science2000; 287: 1801–1804.
25.
KimKTChaSIHongSH. Microstructures and tensile behavior of carbon nanotube reinforced Cu matrix nanocomposites. Mater Sci Eng A2006; 430: 27–33.
LiaoJTanM-J. Mixing of carbon nanotubes (CNTs) and aluminum powder for powder metallurgy use. Powder Technol2011; 208: 42–48.
28.
EsawiAMorsiK. Dispersion of carbon nanotubes (CNTs) in aluminum powder. Compos Part A Appl Sci Manuf2007; 38: 646–650.
29.
EsawiAMKMorsiKSayedA. The influence of carbon nanotube (CNT) morphology and diameter on the processing and properties of CNT-reinforced aluminium composites. Compos Part A: Appl Sci Manuf2011; 42: 234–243.
30.
LiHMisraAZhuY. Processing and characterization of nanostructured Cu-carbon nanotube composites. Mater Sci Eng A2009; 523: 60–64.
GeorgeRKashyapKTRahulR. Strengthening in carbon nanotube/aluminium (CNT/Al) composites. Scripta Materialia2005; 53: 1159–1163.
33.
DengCZhangXWangD. Preparation and characterization of carbon nanotubes/aluminum matrix composites. Mater Lett2007; 61: 1725–1728.
34.
BoehmHP. Surface oxides on carbon and their analysis: a critical assessment. Carbon2002; 40: 145–149.
35.
WilliamsonGKHallWH. X-ray line broadening from filed aluminium and wolfram. Acta Metallurg1953; 1: 22–31.
36.
Somogyi K, Theys B, Deneuville A, et al. Application of two- and four-point contact probes to various monocrystalline diamond surfaces. Diamond and Related Materials 2002; 11: 332–337.
37.
KuznetsovaAPopovaIYatesJTJr. Oxygen-containing functional groups on single-wall carbon nanotubes: NEXAFS and vibrational spectroscopic studies. J Am Chem Soc2001; 123: 10699–10704.
38.
StobinskiLLesiakBKövérL. Multiwall carbon nanotubes purification and oxidation by nitric acid studied by the FTIR and electron spectroscopy methods. J Alloys Comp2010; 501: 77–84.
39.
Poole Jr CP and Owens FJ. Introduction to nanotechnology. Wiley-Interscience, 2003.
40.
Suryanarayana C. Mechanical alloying and milling. CRC, 2004.
41.
RaoAEklundPBandowS. Evidence for charge transfer in doped carbon nanotube bundles from Raman scattering. Nature1997; 388: 257–259.
42.
ChoiHShinJMinB. Reinforcing effects of carbon nanotubes in structural aluminum matrix nanocomposites. J Mater Res2009; 24: 2610–2616.
43.
TangFAndersonIEGnaupel-HeroldT. Pure Al matrix composites produced by vacuum hot pressing: Tensile properties and strengthening mechanisms. Mater Sci Eng A2004; 383: 362–373.
44.
YangYLWangYDRenY. Single-walled carbon nanotube-reinforced copper composite coatings prepared by electrodeposition under ultrasonic field. Mater Lett2008; 62: 47–50.
45.
YaoYDaiXFengC. Crinkling ultralong carbon nanotubes into serpentines by a controlled landing process. Adv Mater2009; 21: 4158–4162.
