Composite materials possess high mechanical in-plane properties but suffer from very low out-of-plane properties due to limited inter-laminar strength. Common z-pinning techniques to improve the mechanical properties of composites materials are presented in this paper. Special techniques to reinforce liquid composite molding preforms are explained. A new, low-cost z-pinning method to create high-performance laminates of dry fabrics invented by the author will also be introduced. Mode I double cantilever beam tests are performed to compare rectangular and circular z-pins using the newly described manufacturing process.
MouritzAP. Review of z-pinned composite laminates. Compos Part A2007; 38: 2383–2397.
2.
Ko FK. Three-dimensional fabrics for composites. In: Composite materials series. Textile structural composites. Vol. 13, Amsterdam, New York: Elsevier, 1989.
3.
TongLMouritzAPBannisterMK. 3D fibre reinforced polymer composites, London: Elsevier, 2002.
4.
MouritzAPBannisterMKFalzonPJ. Review of applications for advanced three-dimensional fibre textile composites. Compos Part A1999; 30: 1445–1461.
5.
DransfieldKAJainLKMaiYW. Improving the delamination resistance of CFRP by stitching − review. Compos Sci Technol1994; 50: 305–317.
6.
Dell'AnnoGCartieDDRPartridgeIK. Exploring mechanical properties in tufted carbon fabric/epoxy composites. Compos Part A2007; 38: 2366–2373.
7.
KnauppMScharrG. Use of z-pins to modify the impact resistance of fiber reinforced plastics. Konstruktion2012; 4: 77–82.
8.
Xiang Z, Hounslow L and Grassi M. Improvement of low-velocity impact and compression-after-impact performance by z-fibre pinning. Composites science and technology 2006; 66: 2785–2794.
9.
Childress JJ and Freitas G. Z-Direction pinning of composite laminates for increased survivability. In: Proceedings of the AIAA aerospace design conference, Irvine, California, February 1992.
10.
Hiley MJ and Stringer G. A comparison of through-thickness reinforcement methods: Z-Pinning and stitching. In: Proceedings of the 16th international conference on composite materials, Kyoto, July, 2007.
11.
Rezai A, Cartie DDR, Partridge IK, et al. Interlaminar damage resistance of z-fibre reinforced structural CFRP. In: Proceedings of the 13th international conference on composite materials, Beijing, June 2001.
12.
Partridge IK, Cartie DDR, Troulis M, et al. Evaluating the mechanical effectiveness of z-pinning. In: Proceedings of the SAMPE technical conference, September 2004.
13.
Cartie DDR. Effects of z-fibers on the delamination behavior of carbon fibre/epoxy laminates. PhD Thesis, Cranfield University, 2000.
14.
Foster-Miller Inc. Composite structure reinforcement. U.S. Patent 4808461, 1989.
15.
Choi IH, Ahn SM, Yeom SH, et al. Manufacturing of z-pinned composite laminates. In: Proceedings of ICCM-17 Conference, Edinburgh, 2009.
16.
Lefebure P. Assembly of dry carbon preforms by a z-pinning technology. In: Proceedings of SAMPE Europe technical conference, Toulouse, 2006.
17.
GrassiMZhangX. Finite element analyses of mode I interlaminar delamination in z-fibre reinforced composite laminates. Compos Sci Technol2003; 63: 1815–1832.
