In order to examine the effect of ply thickness on the crack initiation and propagation in the 90° layer in [0°/90°n/0°] laminates, we conducted numerical simulations using two-dimensional mesoscopic numerical models. We found that the stress increase in the thin layer with 40 µm thickness was restricted in the vicinity of the adjacent layers, leading to restriction of crack penetration through the 90° layer. In addition, we confirmed the effect of stiffness of adjacent layers. In the case where the 90° layer was sandwiched between 45° layers, which had lower stiffness than the 0° layers, crack propagation in the 90° layer was faster than that observed with the 0° adjacent layers. Thus, the crack propagation behavior in the 90° layer was significantly influenced by the change in the stiffness caused by the orientation angle of the adjacent layers.
ParviziABaileyJE. On multiple transverse cracking in glass fibre epoxy cross-ply laminates. J Mater Sci1978; 13(10): 2131–2136.
2.
GarrettKWBaileyJE. Multiple transverse fracture in 90° cross-ply laminates of a glass fibre-reinforced polyester. J Mater Sci1977; 12: 157–168.
3.
FlaggsDLKuralMH. Experimental determination of the in situ transverse lamina strength in graphite/epoxy laminates. J Compos Mater1982; 16(2): 103–116.
4.
OgiharaSTakedaNKobayashiA. Experimental characterization of microscopic failure process under quasi‐static tension in interleaved and toughness‐improved CFRP cross-ply laminates. Compos Sci Technol1997; 57: 267–275.
SaitoHTakeuchiHKimparaI. Experimental evaluation of the damage growth restraining in 90° layer of thin-ply CFRP cross-ply laminates. Adv Compos Mater2012; 21: 57–66.
7.
BonifaceLSmithPABaderMG. Transverse ply cracking in cross-ply CFRP laminates – Initiation or propagation controlled?J Compos Mater1997; 31(11): 1080–1112.
8.
Kawabe K and Tomoda S. Multi-filament split-yarn sheet and method and device for the manufacture thereof. Patent no. 6032342, USA, 2000.
9.
Kawabe K and Tomoda S. Method of producing a spread multi-filament bundle and an apparatus used in the same. Patent no. 7832068, USA, 2010.
10.
Kawabe K, Tomoda S and Matsuo T. A pneumatic process for spreading reinforcing fiber tow. In: Proceedings of the 42nd International SAMPE USA, Anaheim, CA, USA, 4–8 May 1997, pp.65–76.
11.
Sasayama H, Kawabe K, Tomoda S, et al. Effect of lamina thickness on first ply failure in multidirectionally laminated composites. In: Proceedings of the 8th Japan International SAMPE, Tokyo Big Sight, Japan, 18–21 November 2003, pp.18–21.
12.
KawabeKSasayamaHTomodaS. New carbon fiber tow-spread technology and applications to advanced composite materials. SAMPE J2009; 45(2): 6–17.
13.
Tsai SW, Sihn S and Kim RY. Thin ply composites. Collection of technical papers – AIAA/ASME/ASCE/AHS/ASC structures. In: Structural dynamics and materials conference, Austin, TX, 2005, pp.2555–2559. Reston, USA: American Institute of Aeronautics and Astronautics, Inc.
14.
NishikawaYOkuboKFujiiT. Fatigue crack constraint in plain-woven CFRP using newly-developed spread tows. Int J Fatigue2006; 28: 1248–1253.
15.
YokozekiTAokiYOgasawaraT. Experimental characterization of strength and damage resistance properties of thin-ply carbon fiber/toughened epoxy laminates. Compos Struct2008; 82: 382–389.
16.
HobbiebrunkenTHojoMJinKK. Influence of non-uniform fiber arrangement on microscopic stress and failure initiation in thermally and transversely loaded CF/epoxy laminated composites. Compos Sci Technol2008; 68: 3107–3113.
17.
TotryEGozalezCLLorcaJ. Prediction of the failure locus of C/PEEK composites under transverse compression and longitudinal shear through computational micromechanics. Compos Sci Technol2008; 68: 3128–3136.
18.
RomanowiczM. Progressive failure analysis of unidirectional fiber-reinforced polymers with inhomogeneous interphase and randomly distributed fibers under transverse tensile loading. Compos Part A2010; 41(12): 1829–1838.
19.
OkabeTNishikawaMToyoshimaH. A periodic unit-cell simulation of fiber arrangement dependence on the transverse tensile failure in unidirectional carbon fiber reinforced composites. Int J Solids Struct2011; 48: 2948–2959.
20.
VaughanTJMcCarthyCT. Micromechanical modelling of the transverse damage behaviour in fibre reinforced composites. Compos Sci Technol2011; 71: 388–396.
21.
Hobbiebrunken T. Microscopic transverse failure initiation in composite materials. PhD thesis, Kyoto University, 2005.
22.
MSC.Marc2010. Volume A: theory and user information, MSC Software Corporation, pp.529–533.
23.
RamanathanTBismarckASchulzE. Investigation of the influence of surface-activated carbon fibres on debonding energy and frictional stress in polymer-matrix composites by the micro-indentation technique. Compos Sci Technol2001; 61: 2511–2518.
24.
OgiharaSSakamotoYKoyanagiJ. Evaluation of tensile strength in glass fiber/epoxy resin interface using the cruciform specimen method. Trans Japan Soc Mech Eng Part A2009; 75(749): 49–55 (in Japanese).
25.
FlaggsDLKuralMH. Experimental determination of the in situ transverse lamina strength in graphite/epoxy laminates. J Compos Mater1982; 16(2): 103–116.
26.
FlaggsDL. Prediction of tensile matrix failure in composite laminates. J Compos Mater1985; 19(1): 29–50.
